mirror of https://github.com/rusefi/rusefi.git
generating fresh
This commit is contained in:
rusefi
parent
ed3a707e3a
commit
7015a5c250
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Oct 30 09:25:38 EDT 2019
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Nov 05 21:04:57 EST 2019
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
|
||||
|
|
@ -1256,12 +1256,12 @@ struct engine_configuration_s {
|
|||
*/
|
||||
engine_load_mode_e fuelAlgorithm;
|
||||
/**
|
||||
* This is the type of injection strategy (See Fuel/Injection settings for more detail) it is suggested to use "Simultaneous" for easiest starting.
|
||||
* This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous".
|
||||
* offset 424
|
||||
*/
|
||||
injection_mode_e crankingInjectionMode;
|
||||
/**
|
||||
* This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, only use this if you have individually wired injectors. "batched" will fire the injectors in groups, if your injectors are individually wired you will also need to enable "Two wire batch emulation".
|
||||
* This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation".
|
||||
* set injection_mode X
|
||||
* See also twoWireBatchInjection
|
||||
* offset 428
|
||||
|
|
@ -2887,4 +2887,4 @@ typedef struct persistent_config_s persistent_config_s;
|
|||
|
||||
#endif
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Wed Oct 30 09:25:38 EDT 2019
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Nov 05 21:04:57 EST 2019
|
||||
|
|
|
|||
|
|
@ -376,7 +376,7 @@ engine_load_mode_e fuelAlgorithm;+This setting controls which fuel quantity cont
|
|||
|
||||
custom injection_mode_e 4 bits, U32, @OFFSET@, [0:1], "Simultaneous", "Sequential", "Batch", "Single Point"
|
||||
injection_mode_e crankingInjectionMode;+This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous".
|
||||
injection_mode_e injectionMode;+This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
injection_mode_e injectionMode;+This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection
|
||||
angle_t extraInjectionOffset;+this is about deciding when the injector starts it's squirt\nSee also injectionPhase map\ntodo: do we need even need this since we have the map anyway?;"deg", 1, 0.0, -720, 720, 2
|
||||
angle_t crankingTimingAngle;+Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.\nset cranking_timing_angle X; "deg", 1, 0.0, -360, 360, 2
|
||||
|
||||
|
|
|
|||
|
|
@ -85,7 +85,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Nov 03 10:36:02 EST 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Nov 05 21:04:57 EST 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -999,8 +999,8 @@ page = 1
|
|||
cylinderBore = "Cylinder diameter, in mm."
|
||||
sensorSnifferRpmThreshold = "Disable sensor sniffer above this rpm"
|
||||
fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nSee also useTPSAdvanceTable\nset algorithm X"
|
||||
crankingInjectionMode = "This is the type of injection strategy (See Fuel/Injection settings for more detail) it is suggested to use "Simultaneous" for easiest starting."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, only use this if you have individually wired injectors. "batched" will fire the injectors in groups, if your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
extraInjectionOffset = "this is about deciding when the injector starts it's squirt\nSee also injectionPhase map\ntodo: do we need even need this since we have the map anyway?"
|
||||
crankingTimingAngle = "Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.\nset cranking_timing_angle X"
|
||||
ignitionMode = ""One Coil" is for use on distributed ignition system. "Individual Coils" is to be used when you have one coil per cylinder (COP or similar). "Wasted" means one coil is driving two spark plugs in two cylinders, with one of the sparks not doing anything since it's happening on the exhaust cycle\nset ignition_mode X"
|
||||
|
|
|
|||
|
|
@ -85,7 +85,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Nov 03 10:36:06 EST 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Nov 05 21:05:01 EST 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -999,8 +999,8 @@ page = 1
|
|||
cylinderBore = "Cylinder diameter, in mm."
|
||||
sensorSnifferRpmThreshold = "Disable sensor sniffer above this rpm"
|
||||
fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nSee also useTPSAdvanceTable\nset algorithm X"
|
||||
crankingInjectionMode = "This is the type of injection strategy (See Fuel/Injection settings for more detail) it is suggested to use "Simultaneous" for easiest starting."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, only use this if you have individually wired injectors. "batched" will fire the injectors in groups, if your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
extraInjectionOffset = "this is about deciding when the injector starts it's squirt\nSee also injectionPhase map\ntodo: do we need even need this since we have the map anyway?"
|
||||
crankingTimingAngle = "Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.\nset cranking_timing_angle X"
|
||||
ignitionMode = ""One Coil" is for use on distributed ignition system. "Individual Coils" is to be used when you have one coil per cylinder (COP or similar). "Wasted" means one coil is driving two spark plugs in two cylinders, with one of the sparks not doing anything since it's happening on the exhaust cycle\nset ignition_mode X"
|
||||
|
|
|
|||
|
|
@ -85,7 +85,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Nov 03 10:36:04 EST 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Nov 05 21:04:59 EST 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -999,8 +999,8 @@ page = 1
|
|||
cylinderBore = "Cylinder diameter, in mm."
|
||||
sensorSnifferRpmThreshold = "Disable sensor sniffer above this rpm"
|
||||
fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nSee also useTPSAdvanceTable\nset algorithm X"
|
||||
crankingInjectionMode = "This is the type of injection strategy (See Fuel/Injection settings for more detail) it is suggested to use "Simultaneous" for easiest starting."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, only use this if you have individually wired injectors. "batched" will fire the injectors in groups, if your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
extraInjectionOffset = "this is about deciding when the injector starts it's squirt\nSee also injectionPhase map\ntodo: do we need even need this since we have the map anyway?"
|
||||
crankingTimingAngle = "Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.\nset cranking_timing_angle X"
|
||||
ignitionMode = ""One Coil" is for use on distributed ignition system. "Individual Coils" is to be used when you have one coil per cylinder (COP or similar). "Wasted" means one coil is driving two spark plugs in two cylinders, with one of the sparks not doing anything since it's happening on the exhaust cycle\nset ignition_mode X"
|
||||
|
|
|
|||
|
|
@ -85,7 +85,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Nov 03 10:36:07 EST 2019
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Nov 05 21:05:02 EST 2019
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -999,8 +999,8 @@ page = 1
|
|||
cylinderBore = "Cylinder diameter, in mm."
|
||||
sensorSnifferRpmThreshold = "Disable sensor sniffer above this rpm"
|
||||
fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nSee also useTPSAdvanceTable\nset algorithm X"
|
||||
crankingInjectionMode = "This is the type of injection strategy (See Fuel/Injection settings for more detail) it is suggested to use "Simultaneous" for easiest starting."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, only use this if you have individually wired injectors. "batched" will fire the injectors in groups, if your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"."
|
||||
injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection"
|
||||
extraInjectionOffset = "this is about deciding when the injector starts it's squirt\nSee also injectionPhase map\ntodo: do we need even need this since we have the map anyway?"
|
||||
crankingTimingAngle = "Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.\nset cranking_timing_angle X"
|
||||
ignitionMode = ""One Coil" is for use on distributed ignition system. "Individual Coils" is to be used when you have one coil per cylinder (COP or similar). "Wasted" means one coil is driving two spark plugs in two cylinders, with one of the sparks not doing anything since it's happening on the exhaust cycle\nset ignition_mode X"
|
||||
|
|
|
|||
Loading…
Reference in New Issue