rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Change name from "invert "input": true/false" to "trigger edge: rising/falling" #5847

This commit is contained in:
rusefillc 2024-01-02 11:51:05 -05:00
parent f73b7ac5b4
commit 8ae9732748
2 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
firmware/integration/rusefi_config.txt
View File

@ -904,7 +904,7 @@ custom maf_sensor_type_e 1 bits, S08, @OFFSET@, [0:1], @@maf_sensor_type_e_enum@
bit vvtBooleanForVerySpecialCases
bit enableSoftwareKnock
bit verboseVVTDecoding;Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details
bit invertCamVVTSignal;get invertCamVVTSignal
bit invertCamVVTSignal,"Falling","Rising";get invertCamVVTSignal
bit alphaNUseIat;In Alpha-N mode, compensate for air temperature.
bit knockBankCyl1,"Channel 2","Channel 1"
bit knockBankCyl2,"Channel 2","Channel 1"
@ -1009,8 +1009,8 @@ end_struct
bit boardUse2stepPullDown,"With Pull Down","With Pull Up"
bit tachPulseDurationAsDutyCycle,"Duty cycle","Constant time";Treat milliseconds value as duty cycle value, i.e. 0.5ms would become 50%
bit isAlternatorControlEnabled;This enables smart alternator control and activates the extra alternator settings.
bit invertPrimaryTriggerSignal;https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the primary engine speed sensor.
bit invertSecondaryTriggerSignal;https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor.
bit invertPrimaryTriggerSignal,"Falling","Rising";https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the primary engine speed sensor.
bit invertSecondaryTriggerSignal,"Falling","Rising";https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor.
bit cutFuelOnHardLimit,"yes","no"
bit cutSparkOnHardLimit,"yes","no";Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer.

6
firmware/tunerstudio/rusefi.input
View File

@ -2377,9 +2377,9 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
; not crank trigger and ((vague trigger and cam choice) or not vague trigger)
field = "Cam Sensor (Primary channel)", triggerInputPins1, 1, {twoStroke == 1 || ( !(@@TRIGGER_CRANK_BASED@@) && ( ( (@@TRIGGER_TYPE_WITHOUT_KNOWN_LOCATION@@) && skippedWheelOnCam) || !(@@TRIGGER_TYPE_WITHOUT_KNOWN_LOCATION@@) ) ) }
field = "Crank Sensor (Primary channel)", triggerInputPins1, 1, { !(twoStroke == 1 || ( !(@@TRIGGER_CRANK_BASED@@) && ( ( (@@TRIGGER_TYPE_WITHOUT_KNOWN_LOCATION@@) && skippedWheelOnCam) || !(@@TRIGGER_TYPE_WITHOUT_KNOWN_LOCATION@@) ) )) }
field = "Invert Primary", invertPrimaryTriggerSignal
field = "Primary Edge", invertPrimaryTriggerSignal
field = "Secondary channel", triggerInputPins2, { triggerInputPins2 != 0 || (triggerInputPins1 != 0 && (@@TRIGGER_TYPE_WITH_SECOND_WHEEL@@) ) }
field = "Invert Secondary", invertSecondaryTriggerSignal, {triggerInputPins2 != 0 && (@@TRIGGER_TYPE_WITH_SECOND_WHEEL@@) }
field = "Secondary Edge", invertSecondaryTriggerSignal, {triggerInputPins2 != 0 && (@@TRIGGER_TYPE_WITH_SECOND_WHEEL@@) }
dialog = trigger_cams, "Cam Inputs"
field = "!https://rusefi.com/s/vvt"
@ -2395,7 +2395,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
field = "Cam sensor bank 1 exhaust", camInputs2, { camInputs2 != 0 || (vvtMode2 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs1 != 0 ) }
field = "Cam sensor bank 2 intake", camInputs3, { camInputs3 != 0 || (vvtMode1 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs1 != 0 ) }
field = "Cam sensor bank 2 exhaust", camInputs4, { camInputs4 != 0 || (vvtMode2 != @@vvt_mode_e_VVT_INACTIVE@@ && camInputs2 != 0 ) }
field = "Invert cam inputs", invertCamVVTSignal, { camInputs1 != 0 }
field = "Cam Edge Select", invertCamVVTSignal, { camInputs1 != 0 }
field = ""
field = "#Set offset so VVT indicates 0 degrees in default position"
field = "VVT offset bank 1 intake", vvtOffsets1, { camInputs1 != 0 }