Chrysler NGC 4, 6, 8 cylinder patterns
This commit is contained in:
DeionSi
parent
2edcb77bb4
commit
5a41c494a0
|
|
@ -98,7 +98,7 @@ Honda RC51 wiht cam
|
|||
36 crank pulses
|
||||
3600 hz
|
||||
|
||||
36-1+1 NGC4
|
||||
36+2-2 NGC4
|
||||
36 crank pulses
|
||||
3600 hz
|
||||
|
||||
|
|
|
|||
|
|
@ -91,7 +91,9 @@ wheels Wheels[MAX_WHEELS] = {
|
|||
{ lotus_thirty_six_minus_one_one_one_one_friendly_name, lotus_thirty_six_minus_one_one_one_one, 0.6, 72, 360 },
|
||||
{ honda_rc51_with_cam_friendly_name, honda_rc51_with_cam, 0.2, 48, 720 },
|
||||
{ thirty_six_minus_one_with_second_trigger_friendly_name, thirty_six_minus_one_with_second_trigger, 0.6, 144, 720 },
|
||||
{ thirty_six_minus_one_plus_one_with_cam_ngc4_friendly_name, thirty_six_minus_one_plus_one_with_cam_ngc4, 3.0, 720, 720 },
|
||||
{ chrysler_ngc_thirty_six_plus_two_minus_two_with_ngc4_cam_friendly_name, chrysler_ngc_thirty_six_plus_two_minus_two_with_ngc4_cam, 3.0, 720, 720 },
|
||||
{ chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc6_cam_friendly_name, chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc6_cam, 3.0, 720, 720 },
|
||||
{ chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc8_cam_friendly_name, chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc8_cam, 3.0, 720, 720 },
|
||||
{ weber_iaw_with_cam_friendly_name, weber_iaw_with_cam, 1.2, 144, 720 },
|
||||
{ fiat_one_point_eight_sixteen_valve_with_cam_friendly_name, fiat_one_point_eight_sixteen_valve_with_cam, 3.0, 720, 720 },
|
||||
{ three_sixty_nissan_cas_friendly_name, three_sixty_nissan_cas, 3.0, 720, 720 },
|
||||
|
|
|
|||
|
|
@ -89,7 +89,9 @@
|
|||
LOTUS_THIRTY_SIX_MINUS_ONE_ONE_ONE_ONE, /* Lotus crank wheel 36-1-1-1-1 */
|
||||
HONDA_RC51_WITH_CAM, /* Honda oddfire 90 deg V-twin */
|
||||
THIRTY_SIX_MINUS_ONE_WITH_SECOND_TRIGGER, /* From jimstim */
|
||||
THIRTY_SIX_MINUS_ONE_PLUS_ONE_WITH_CAM_NGC4, /* From jimstim 36-1+1 wheel #5 4 cyl chrysler? */
|
||||
CHRYSLER_NGC_THIRTY_SIX_PLUS_TWO_MINUS_TWO_WITH_NGC4_CAM, /* Chrysler NGC 36+2-2 crank with NGC 4 cylinder cam pattern */
|
||||
CHRYSLER_NGC_THIRTY_SIX_MINUS_TWO_PLUS_TWO_WITH_NGC6_CAM, /* Chrysler NGC 36-2+2 crank with NGC 6 cylinder cam pattern */
|
||||
CHRYSLER_NGC_THIRTY_SIX_MINUS_TWO_PLUS_TWO_WITH_NGC8_CAM, /* Chrysler NGC 36-2+2 crank with NGC 8 cylinder cam pattern */
|
||||
WEBER_IAW_WITH_CAM, /* From jimstim IAW weber-marelli */
|
||||
FIAT_ONE_POINT_EIGHT_SIXTEEN_VALVE_WITH_CAM, /* Fiat 1.8 16V from jimstim */
|
||||
THREE_SIXTY_NISSAN_CAS, /*from jimstim 360 tooth cas with 6 slots */
|
||||
|
|
@ -148,7 +150,9 @@
|
|||
const char lotus_thirty_six_minus_one_one_one_one_friendly_name[] PROGMEM = "Odd Lotus 36-1-1-1-1 flywheel";
|
||||
const char honda_rc51_with_cam_friendly_name[] PROGMEM = "Honda RC51 with cam";
|
||||
const char thirty_six_minus_one_with_second_trigger_friendly_name[] PROGMEM = "36-1 crank with 2nd trigger on teeth 33-34";
|
||||
const char thirty_six_minus_one_plus_one_with_cam_ngc4_friendly_name[] PROGMEM = "36-1+1 crank with cam pattern NGC4";
|
||||
const char chrysler_ngc_thirty_six_plus_two_minus_two_with_ngc4_cam_friendly_name[] PROGMEM = "Chrysler NGC 36+2-2 crank, NGC 4-cyl cam";
|
||||
const char chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc6_cam_friendly_name[] PROGMEM = "Chrysler NGC 36-2+2 crank, NGC 6-cyl cam";
|
||||
const char chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc8_cam_friendly_name[] PROGMEM = "Chrysler NGC 36-2+2 crank, NGC 8-cyl cam";
|
||||
const char weber_iaw_with_cam_friendly_name[] PROGMEM = "Weber-Marelli 8 crank+2 cam pattern";
|
||||
const char fiat_one_point_eight_sixteen_valve_with_cam_friendly_name[] PROGMEM = "Fiat 1.8 16V crank and cam";
|
||||
const char three_sixty_nissan_cas_friendly_name[] PROGMEM = "Nissan 360 CAS with 6 slots";
|
||||
|
|
@ -650,11 +654,11 @@
|
|||
0,0 /* 36th MISSING tooth */
|
||||
};
|
||||
|
||||
const unsigned char thirty_six_minus_one_plus_one_with_cam_ngc4[] PROGMEM =
|
||||
{ /* 36-1+1 NGC-4 needs 1 deg resolution, chrysler 2.0/2.4 engines
|
||||
const unsigned char chrysler_ngc_thirty_six_plus_two_minus_two_with_ngc4_cam[] PROGMEM =
|
||||
{ /* 36+2-2 NGC-4 needs 1 deg resolution, Chrysler NGC engines used in Chrysler/Dodge/Jeep
|
||||
* cam edges are at 26,62,98,134,170,314,350,368,422,458,494,530,674 and 710 dev
|
||||
* crank is 36-1 with alarge window at one end 2.5 teeth cycles (25 deg) wide and alosed
|
||||
* at 180deg apart for 2 teeth cycles (20 deg)
|
||||
* crank is 36 teeth with two sets of two missing teeth ~180 degrees apart
|
||||
* The sets of missing teeth have different polarity to distinguish position
|
||||
*/
|
||||
/* Crankshaft degrees
|
||||
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 */
|
||||
|
|
@ -666,9 +670,9 @@
|
|||
2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3, /* 201-240 */
|
||||
2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3, /* 241-280 */
|
||||
2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,0,0,1,1,1,1,1, /* 281-320 */
|
||||
0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,3,2,2,2,2,2,3,3,3,3,3, /* 321-360 */
|
||||
0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,3,2,2,2,2,2,3,3,3,3,3, /* 321-360 */
|
||||
2,2,2,2,2,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1, /* 361-400 */
|
||||
0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3, /* 401-440 */
|
||||
0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3, /* 401-440 */
|
||||
2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1, /* 441-480 */
|
||||
0,0,0,0,0,1,1,1,1,1,0,0,0,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3, /* 481-520 */
|
||||
2,2,2,2,2,3,3,3,3,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 521-560 */
|
||||
|
|
@ -678,6 +682,76 @@
|
|||
2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,3,2,2,2,2,2,3,3,3,3,1,0,0,0,0,0,1,1,1,1,1 /* 681-720 */
|
||||
};
|
||||
|
||||
const unsigned char chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc6_cam[] PROGMEM =
|
||||
{ /*
|
||||
Crank is same as NGC 4 pattern except cylinder 1 TDC is 180 degrees off, hence 36-2+2
|
||||
|
||||
Cam information has been determined from:
|
||||
https://rotkee.com/en/wavebase/good-timing-ckp-cmp-signal-dodge-charger-lx-ld-2006-2010?brand=167
|
||||
https://rotkee.com/en/wavebase/good-timing-ckp-cmp-signal-jeep-liberty-kj-2002-2007?brand=180
|
||||
https://rotkee.com/en/wavebase/good-timing-ckp-cmp-signal-dodge-caravan-2008-2020?brand=167
|
||||
Cam cylinder 1 has been determined from https://youtu.be/CVXKXmCudAs?t=893
|
||||
|
||||
Cam has 6 groups consisting of 1-3 teeth. Each group starting 120 degrees apart.
|
||||
The number of teeth per group form the pattern 3-1-2-3-2-1 of which any 2 values can be used to determine position.
|
||||
Each tooth is ~10 degrees wide and is spaced ~21 degrees from the other teeth.
|
||||
*/
|
||||
2,2,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,2,2,2,2,2,2,0,0,1,1,1,1,1,0,0,0,0,2,3,
|
||||
3,3,3,3,2,2,2,2,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,
|
||||
0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,
|
||||
1,1,0,0,2,2,2,3,3,3,3,3,2,2,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,
|
||||
0,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,1,
|
||||
1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,2,2,2,3,3,3,3,3,2,2,0,0,0,1,1,1,1,1,0,0,
|
||||
0,2,2,3,3,3,3,3,2,2,2,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,
|
||||
1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,2,2,2,3,3,3,3,3,
|
||||
2,2,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,2,2,2,2,2,2,0,0,1,1,1,1,1,0,0,0,0,2,3,
|
||||
3,3,3,3,2,2,2,2,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,
|
||||
0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,
|
||||
1,1,0,0,2,2,2,3,3,3,3,3,2,2,0,0,0,1,1,1,1,1,0,0,0,2,2,3,3,3,3,3,2,2,2,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,
|
||||
0,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,1,
|
||||
1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,2,2,2,3,3,3,3,3,2,2,0,0,0,1,1,1,1,1,0,0,
|
||||
0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,
|
||||
1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,2,2,2,3,3,3,3,3
|
||||
};
|
||||
|
||||
const unsigned char chrysler_ngc_thirty_six_minus_two_plus_two_with_ngc8_cam[] PROGMEM =
|
||||
{ /*
|
||||
Crank is same as NGC 4 pattern except cylinder 1 TDC is 180 degrees off, hence 36-2+2
|
||||
|
||||
Cam information has been determined from:
|
||||
https://rotkee.com/en/wavebase/good-timing-ckp-cmp-in-cylinder-pressure-dodge-ram-3-dr-dh-d1-dc-dm-2001-2009?brand=167
|
||||
https://rotkee.com/en/wavebase/good-timing-ckp-cmp-signal-dodge-durango-2-2003-2008?brand=167
|
||||
https://rotkee.com/en/wavebase/good-timing-ckp-cmp-signal-dodge-ram-3-dr-dh-d1-dc-dm-2001-2009?engine=2299
|
||||
|
||||
Cam has 8 groups consisting of 1-3 teeth. Each group starting 90 degrees apart.
|
||||
The number of teeth per group form the pattern 1-2-3-2-2-1-3-1 of which any 2 values can be used to determine position.
|
||||
Each tooth is ~8 degrees wide and is spaced ~21 degrees from the other teeth.
|
||||
*/
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,
|
||||
1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,
|
||||
0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,
|
||||
1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1,
|
||||
0,0,0,0,0,1,1,1,3,3,3,3,3,3,3,3,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,1,
|
||||
1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,
|
||||
0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1,0,0,0,0,0,1,1,1,3,3,2,2,2,2,2,3,1,1,
|
||||
1,1,0,0,0,0,0,1,1,1,1,3,2,2,2,2,2,3,3,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1,
|
||||
0,0,0,0,0,0,0,0,2,2,2,2,2,2,2,2,0,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,
|
||||
1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,
|
||||
0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1,0,0,0,0,0,1,1,1,3,3,2,2,2,2,2,3,1,1,
|
||||
1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1,
|
||||
0,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,1,
|
||||
1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,
|
||||
0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1,0,0,0,0,0,1,1,1,3,3,2,2,2,2,2,3,1,1,
|
||||
1,1,0,0,0,0,0,1,1,1,1,3,2,2,2,2,2,3,3,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,
|
||||
0,1,1,1,1,1,0,0,0,0,0,1,1,1,1,1,0,0,0,0,0,1,1,3,3,3,2,2,2,2,2,1,1,1,1,1
|
||||
};
|
||||
|
||||
const unsigned char weber_iaw_with_cam[] PROGMEM =
|
||||
{ /*Weber marelli (Cosworth/Lancia) from jimstim
|
||||
|
|
|
|||
Loading…
Reference in New Issue