* do not advertise rejected transactions
* do not broadcast transaction that are expired
* change dummy var name
* simplify code, performance
* clippy
* add some test coverage
* clippy
Co-authored-by: teor <teor@riseup.net>
* Split mempool config into its own module
Also:
- expand config docs
- clean up mempool imports
* Pass the mempool config to the mempool
* Create the transaction sender channel inside the mempool 1/2
This simplifies all the code that calls the mempool.
Also:
- update the mempool enabled state before returning the new mempool
- add some test module doc comments
* Refactor a setup function out of the mempool unit tests 2/2
Also:
- update the setup function to handle the latest mempool changes
* Clarify a comment
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Limit the size of rejection lists when there is a spend conflict
Previously, `insert` would return early with an error,
and skip limiting the rejection list sizes.
* Use prop_assert macros in proptests, rather than assert
* Send spent UTXOs from the script verifier to the transaction verifier
* Add temporary assertions for testing spent UTXO sending
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Marek <mail@marek.onl>
* Add `HashSet`s to help spend conflict detection
Keep track of the spent transparent outpoints and the revealed
nullifiers.
Clippy complained that the `ActiveState` had variants with large size
differences, but that was expected, so I disabled that lint on that
`enum`.
* Clear the `HashSet`s when clearing the mempool
Clear them so that they remain consistent with the set of verified
transactions.
* Use `HashSet`s to check for spend conflicts
Store new outputs into its respective `HashSet`, and abort if a
duplicate output is found.
* Remove inserted outputs when aborting
Restore the `HashSet` to its previous state.
* Remove tracked outputs when removing a transaction
Keep the mempool storage in a consistent state when a transaction is
removed.
* Remove tracked outputs when evicting from mempool
Ensure eviction also keeps the tracked outputs consistent with the
verified transactions.
* Refactor to create a `VerifiedSet` helper type
Move the code to handle the output caches into the new type. Also move
the eviction code to make things a little simpler.
* Refactor to have a single `remove` method
Centralize the code that handles the removal of a transaction to avoid
mistakes.
* Move mempool size limiting back to `Storage`
Because the evicted transactions must be added to the rejected list.
* Remove leftover `dbg!` statement
Leftover from some temporary testing code.
Co-authored-by: teor <teor@riseup.net>
* Remove unnecessary `TODO`
It is more speculation than planning, so it doesn't add much value.
Co-authored-by: teor <teor@riseup.net>
* Fix typo in documentation
The verb should match the subject "transactions" which is plural.
Co-authored-by: teor <teor@riseup.net>
* Add a comment to warn about correctness
There's a subtle but important detail in the implementation that should
be made more visible to avoid mistakes in the future.
Co-authored-by: teor <teor@riseup.net>
* Remove outdated comment
Left-over from the attempt to move the eviction into the `VerifiedSet`.
* Improve comment explaining lint removal
Rewrite the comment explaining why the Clippy lint was ignored.
* Check for spend conflicts in `VerifiedSet`
Refactor to avoid API misuse.
* Test rejected transaction rollback
Using two transactions, perform the same test adding a conflict to both
of them to check if the second inserted transaction is properly
rejected. Then remove any conflicts from the second transaction and add
it again. That should work, because if it doesn't it means that when the
second transaction was rejected it left things it shouldn't in the
cache.
* Test removal of multiple transactions
When removing multiple transactions from the mempool storage, all of the
ones requested should be removed and any other transaction should be
still be there afterwards.
* Increase mempool size to 4, so that spend conflict tests work
If the mempool size is smaller than 4,
these tests don't fail on a trivial removal bug.
Because we need a minimum number of transactions in the mempool
to trigger the bug.
Also commit a proptest seed that fails on a trivial removal bug.
(This seed fails if we remove indexes in order,
because every index past the first removes the wrong transaction.)
* Summarise transaction data in proptest error output
* Summarise spend conflict field data in proptest error output
* Summarise multiple removal field data in proptest error output
And replace the very large proptest debug output with the new summary.
Co-authored-by: teor <teor@riseup.net>
* bradcast transactions to peers after they get inserted into mempool
* remove network argument from mempool init
* remove dbg left
* remove return value in mempool enable call
* rename channel sender and receiver vars
* change unwrap() to expect()
* change the channel to a hashset
* fix build
* fix tests
* rustfmt
* fix tiny space issue inside macro
Co-authored-by: teor <teor@riseup.net>
* check errors/panics in transaction gossip tests
* fix build of newly added tests
* Stop dropping the inbound service and mempool in a test
Keeping the mempool around avoids a transaction broadcast task error,
so we can test that there are no other errors in the task.
* Tweak variable names and add comments
* Avoid unexpected drops by returning a mempool guard in tests
* Use BoxError to simplify service types in tests
* Make all returned service types consistent in tests
We want to be able to change the setup without changing the tests.
Co-authored-by: teor <teor@riseup.net>
* Split mempool storage errors into tip-based and chain-based
* Expire tip rejections every time we get a new block
FailedVerification and SpendConflict rejections only apply to the current tip.
The next tip can provide missing inputs, or evict conflicting transactions.
* Enforce MAX_EVICTION_MEMORY_ENTRIES for mempool reject lists
* Check for state errors before updating metrics
Previously, the metrics would be updated for some rejected blocks.
* Clarify and expand block verification metrics
Rename checkpoint-specific metrics to clarify their purpose.
Add metrics for:
- finalized blocks on disk
- blocks verified using the full block verifier
(this metric was previously incorrectly called `zcash_chain_verified_block_height`)
* Update dashboard metric names
Also:
- add some extra block height metrics
- fix a dashboard name
* Add exact block heights to Grafana dashboards
* Add a missing comment
* grafana: use 0 decimals for metrics
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* grafana: show the entire height instead of abbreviated
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* grafana: show the entire height instead of abbreviated
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Fix typo in metric name
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Move height gauges to the state, so they are correct
If we update height gauges in futures, they can execute out of order,
so the metrics can be incorrect.
Instead:
- move the height gauges to the state, and update them based on the best tip
- move the verified block counts to the state
- continue to include all verified blocks on all non-finalized chains
(not just the best chain)
* Show exact checkpoint heights in the dashboard
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Implement a task that gossips verified block hashes
* Log an info message for block broadcasts
* Simplify the gossip task
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Re-use the old tip change if there is no new tip change
Also improve the comments.
* Add an assertion message
* Rename task join handles and futures in start method
* Add a dedicated BlockGossipError type
This type helps distinguish between syncer and state errors.
* Test that committed blocks are gossiped to peers
Also do a minor type cleanup on the existing test code,
replacing `Option<Vec<_>>` with `Vec<_>`.
* Formatting
* Remove excess newlines
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Clear the initial gossiped blocks during test setup
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove unused mempool storage errors
Preparation for ticket #2819.
Removing these errors means that we don't have to decide
which type of transaction ID match we want for them.
* Remove unused mempool errors, and deduplicate storage errors
* rustfmt
* Add a mempool transaction removal method for mined IDs
And use this method to remove expired transactions,
because all transactions with the same mined ID expire at the same height.
* Remove mined transaction IDs from the mempool
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Update versions for zebra v1.0.0-alpha.18 release
* WIP: Initial PR list
* Remove uninteresting version bumps from CHANGELOG
* Categorise and group PRs in CHANGELOG, removing uninteresting PRs
* Further refine and categorise changelog entries
* Fix tag url
* Final changes to CHANGELOG
* Add a changelog description
* Spacing
* Clarify and fix changelog PR descriptions
* Add PRs that are about to be merged
* More slight clarifications
* Spacing
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Check return value of zcash_script_new_precomputed_tx
* Set the NU5 testnet activation height to 1_590_000
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Update Nu5 constants to new values
* Update ZIP-244 test vectors for new branch ID
* Squashed commit of the following:
commit bdb120a249
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 11:54:01 2021 -0400
Use pallas::Base::from_str_vartime() in sinsemilla tests
commit e99fa49258
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 11:45:24 2021 -0400
Compiles
commit a520018114
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 10:15:17 2021 -0400
Incomplete upgrade of deps
* Squashed commit of the following:
commit 8d1b76ec5626517817c3a4d9f3950acc90a359df
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 04:02:26 2021 +0000
Update `zcash_script` to support V5 transactions
Use a newer version of `zcash_script` that has been updated to support
V5 transactions.
commit 371233628ae61e0c25d6ba8f31d9dba42823becb
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 03:06:20 2021 +0000
Update Zcash dependencies
Update some Zcash crates:
- `halo2`
- `incrementalmerkletree' (patch version)
- `orchard` (patch version)
- `zcash_history` (patch version)
- `zcash_note_encryption` (patch version)
- `zcash_primitives` (patch version)
And also update the `group` dependency so that the code remains
compatible.
commit de5cf1ec40c3fc08670fc971cdf3e65e13d9f4c7
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 03:04:13 2021 +0000
Update error message assertion
Use the updated message for the expected error variant.
* Update `zcash_script` to support V5 transactions
Use a newer version of `zcash_script` that has been updated to support
V5 transactions.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: teor <teor@riseup.net>
* Rename type parameter to be more explicit
Replace the single letter with a proper name.
* Remove imports for `Request` and `Response`
The type names will conflict with the ones for the mempool service.
* Attach `Mempool` service to the `Crawler`
Add a field to the `Crawler` type to store a way to access the `Mempool`
service.
* Forward crawled transactions to downloader
The crawled transactions are now sent to the transaction downloader and
verifier, to be included in the mempool.
* Derive `Eq` and `PartialEq` for `mempool::Request`
Make it simpler to use the `MockService::expect_request` method.
* Test if crawled transactions are downloaded
Create some dummy crawled transactions, and let the crawler discover
them. Then check if they are forwarded to the mempool to be downloaded
and verified.
* Don't send empty transaction ID list to downloader
Ignore response from peers that don't provide any crawled transactions.
* Log errors when forwarding crawled transaction IDs
Calling the Mempool service should not fail, so if an error happens it
should be visible. However, errors when downloading individual
transactions can happen from time to time, so there's no need for them
to be very visible.
* Document existing `mempool::Crawler` test
Provide some depth as to what the test expect from the crawler's
behavior.
* Refactor to create `setup_crawler` helper function
Make it easier to reuse the common test setup code.
* Simplify code to expect requests
Now that `zebra_network::Request` implement `Eq`, the call can be
simplified into `expect_request`.
* Refactor to create `respond_with_transaction_ids`
A helper function that checks for a network crawl request and responds
with the given list of crawled transaction IDs.
* Refactor to create `crawler_iterator` helper
A function to intercept and respond to the fanned-out requests sent
during a single crawl iteration.
* Refactor to create `respond_to_queue_request`
Reduce the repeated code necessary to intercept and reply to a request
for queuing transactions to be downloaded.
* Add `respond_to_queue_request_with_error` helper
Intercepts a mempool request to queue transactions to be downloaded, and
responds with an error, simulating an internal problem in the mempool
service implementation.
* Derive `Arbitrary` for `NetworkUpgrade`
This is required for deriving `Arbitrary` for some error types.
* Derive `Arbitrary` for `TransactionError`
Allow random transaction errors to be generated for property tests.
* Derive `Arbitrary` for `MempoolError`
Allow random Mempool errors to be generated for property tests.
* Test if errors don't stop the mempool crawler
The crawler should be robust enough to continue operating even if the
mempool service fails to download transactions or even fails to handle
requests to enqueue transactions.
* Reduce the log level for download errors
They should happen regularly, so there's no need to have them with a
high visibility level.
Co-authored-by: teor <teor@riseup.net>
* Stop crawler if service stops
If `Mempool::poll_ready` returns an error, it's because the mempool
service has stopped and can't handle any requests, so the crawler should
stop as well.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Change assertion condition to match message
Refactor the condition so that the expression is easier to compare to
the panic message.
* Change comparison order to match panic message
Change the order of the equality so that it matches the panic message.
* Move mempool tests into `tests::vector` sub-module
Make it consistent with other test modules and prepare for adding
property tests.
* Reorder imports
Make it consistent with the general guidelines followed on other
modules.
* Export `ChainTipBlock` and `ChainTipSender`
Allow these types to be used in other crates for testing purposes.
* Derive `Arbitrary` for `ChainTipBlock`
Make it easy to generate random `ChainTipBlock`s for usage in property
tests.
* Refactor to move test methods into `tests` module
Reduce the repeated test configuration attributes and make it easier to
see what is test specific and what is part of the general
implementation.
* Add a `Mempool::dummy_call` test helper method
Performs a dummy call just so that `poll_ready` gets called.
* Use `dummy_call` in existing tests
Replace the custom dummy requests with the helper method.
* Test if the mempool is cleared on chain reset
A chain reset should force the mempool storage to be cleared so that
transaction verification can restart using the new chain tip.
* Test if mempool is cleared on syncer restart
If the block synchronizer falls behind and then starts catching up
again, the mempool should be disabled and therefore the storage should
be cleared.
* Add metrics gauges for the most recent peer network protocol version
This gague lets us join the initial seeds to the network protocol versions,
even if the peer upgrades and reconnects with a different version.
* Ensure dashboard peer network versions are unique
Otherwise, prometheus returns an error,
and the dashboard shows no data.
* Make seeder labels more readable
- put labels to the right of the graph
- remove default ports
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Remove `std::error::Error` constraint
The generic `Error` type parameter doesn't have to implement the
standard `Error` trait, so having that constraint only unnecessarily
limits the types that can be used as an error for the service.
* Implement automatic conversion into `Error` type
Make the usage a little more ergonomic by not having to write manual
error type conversions.
* Add a documentation test for an error response
Show an example that responds to a call to the service with an error.
Co-authored-by: teor <teor@riseup.net>
* Send mined transaction IDs to the download and verify task for cancellation
* Pass a HashSet of transaction hashes to be cancelled
* Add mempool_cancel_mined() test
* Fix starvation in test
* Fix typo in comment
* Add tracing and metrics for seed peer DNS resolution
* Add a grafana dashboard for seed peers
Currently this just shows the initial peer count from each seed.
* Add tracing and metrics for peer network protocol versions
* Update peers dashboard with network protocol versions
* Show peer network protocol versions for each seeder in dashboard
* Add per-seed filter to dashboard
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* mempool - support transaction expiration
* use `LatestChainTip` instead of state call
* clippy
* remove spawn task
* remove non needed async from function
* remove return value
* add a `expiry_height_mut()` method to `Transaction` for testing purposes
* fix `remove_expired_transactions()`
* add a `mempool_transaction_expiration()` test
* tidy cleanup to `expiry_height()`
* improve docs
* fix the build
* try fix macos build
* extend tests
* add doc to function
* clippy
* fix build
* start tests at block two
* Cancel download and verify tasks when the mempool is deactivated
* Refactor enable/disable logic to use a state enum
* Add helper test functions to enable/disable the mempool
* Add documentation about errors on service calls
* Improvements from review
* Improve documentation
* Fix bug in test
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
teor
Alfredo Garcia
Deirdre Connolly
Conrado Gouvea
dependabot[bot]
Janito Vaqueiro Ferreira Filho
Pili Guerra