Go to file
OrchardPerformance 36e9ecfdec Update .gitignore 2023-11-02 20:37:55 +00:00
PG-DSO-36-72.pretty
PowerSSO.pretty
ampseal.pretty
conn_5_2.5mm.pretty
export
git_scripts
polygonus-Shortage-Version-backups edit git ignore 2023-10-27 02:29:25 +01:00
proteus-backups
sunlord-MWSA0503.pretty
tsdso24.pretty
via.pretty
.gitignore Update .gitignore 2023-11-02 20:37:55 +00:00
.gitmodules
Keep_Alive.kicad_sch
README.md
bts4175.dcm
bts4175.lib
etb-9201.kicad_sch
etb-9201.sch
etb.sch
fp-lib-table
highside_quad.kicad_sch
highside_quad.sch
ign4.kicad_sch
ign4.sch
infineon_psu.dcm
infineon_psu.lib
knock.kicad_sch
knock.sch
lmr14020.dcm
lmr14020.lib
lowside_quad.kicad_sch
lowside_quad.sch
max9924.dcm
max9924.lib
mcu.kicad_sch
mcu.sch
polygonus-Shortage-Version.kicad_pcb
polygonus-Shortage-Version.kicad_prl
polygonus-Shortage-Version.kicad_pro
polygonus-Shortage-Version.kicad_sch
polygonus-Shortage-Version.lib
polygonus-Shortage-Version.pro
polygonus-Shortage-Version.sch
polygonus-cache.lib
psu.kicad_sch
psu.sch
quad_analog.kicad_sch
quad_analog.sch
quad_analog_pullup.kicad_sch
quad_analog_pullup.sch
sym-lib-table
tle9201_2.dcm
tle9201_2.lib
tle9471.dcm
tle9471.lib
triggers.kicad_sch
triggers.kicad_sch-bak
triggers.sch
vnq7140aj.dcm
vnq7140aj.lib

README.md

Polygonus

Polygonus - FOME PNP Brain unit

In scope -

  • Critical systems on the majority of PNP targets
  • up to 8 cylinder capability built into the brain board
  • Full feature set of the protues broken out to pins meaning vheicle board can add the additional circuits if required

Out of scope -

  • Race cars and tuned cars with large ammounts of additional equipment (that's for a wire in proteus or atlas)
  • Non-standard engines in chassis
  • Additional equipment beyond common mods to the chassis

Intended form factor - 80mm x 80mm up to 85mm x 85mm to suit the majority of cases but ideally as small as practical

Current list of parts dropped from Proteus:

  • 4x lowsides (remove two VNLD5090) LS 9 - 12 routed to plugs
  • 4x High/low (TC4427) IGN 9 - 12 removed and routed to pins
  • Knock signal headphone jack () Line out removed from filtered 1 and 2
  • Both ETB (TLE9201 only added if vehicle needs ) Removing ETB means routing Dis, Dir and PWM to pins adds 2 pins to total
  • Both VR (board reconfigured for hall and MAX added if vehicle needs VR, also larger MAX chip can be used) VR1+ and VR2+ connected to input pins, VR- Removed from pins

Requirement to route 3.3v and 5v out of board for additional vehicle board equipment

Added keep alive voltage pin