- 4x lowsides (remove two VNLD5090) LS 9 - 12 routed to plugs
- 2x High Sides () HS 3+4 routed to plugs Resistor network still in place on board
- 4x High/low (TC4427) IGN 9 - 12 removed and routed to pins
- Knock signal headphone jack () Line out removed from filtered 1 and 2
- Both ETB (TLE9201 only added if vehicle needs ) Removing ETB means routing Dis, Dir and PWM to pins adds 2 pins to total
- Both VR (board configured for hall and MAX added if vehicle needs VR, also larger MAX chip can be used) VR1+ and VR2+ connected to pin, VR- Removed from pins