* rebase
* save changes
* save changes
* fix whitespace
* try enum class
* change field name
* Add TCC pin fields
* add TCC tables
* add a bit of TCC control logic
* Drop SingleChannelStateSequence in favor of MultiChannelStateSequenceWithData
Most all the users were Multi* anyways, so just improve that:
1. Allow up to 8 waveforms to share one byte per timestamp. It could be better but this is simple
and gets most of the benefit.
2. Use a wrapper structure to handle reserving space for the arrays. Makes the interface simpler
and more rigid. Also saves 4 bytes per Multi*. Downside is access is now via -> and *,
not . and (nothing).
Saves 224 bytes of BSS, 1832 bytes of RAM4/CCM, 952 bytes of TEXT, and 103 bytes of RODATA
* Instantiate a base_t to make debugging easier.
Also fixes crash on real firmware by using &m_base instead - LTO optimization issue?
* No magical templated StaticAlloc thingy. Just virtual functions.
* Basic framework for high pressure fuel pump control
* Many changes
Move calculations to fast callback
Move main object into Engine
Respond to pin changes without requiring a reboot
* Use EngineModule for HpfpController
Schedule pin off after executing pin on so we are sure it ends, even if the motor stops.
Test scheduling.
Less RAM use by only having one event and reordering fields.
* Make scheduling test actually useful - need non-0 activation angle.
Co-authored-by: rusefillc <48498823+rusefillc@users.noreply.github.com>
* Programmatically remove EnginePtr/inject, EXPAND_Engine, and WITH_ENGINE_TEST_HELPER*
for i in ": public EnginePtr " ", public EnginePtr" "EXPAND_Engine;" "EXPAND_Engine"; do
git grep -l "$i" | xargs sed -i "s/$i//g"
done
git grep -l "inject" | xargs sed -i "/inject[(][)]/d"
for i in WITH_ENGINE_TEST_HELPER_SENS WITH_ENGINE_TEST_HELPER_BOARD_CALLBACK WITH_ENGINE_TEST_HELPER; do
git grep -l "$i" | xargs sed -i "s/$i/EngineTestHelper eth/g"
done
git checkout firmware/controllers/core/engine_ptr.h
git checkout unit_tests/global.h
* Review fixups.
All it wants is to use the main trigger state, so don't bother copying it. Instead, change
PwmConfig to take a const pointer to a Multi.*Sequence, then make all the users adapt. Worse
fallout is that SimplePwm now has its own Multi.*Sequence, but PwmConfig is downgraded to a
pointer, so that's only a net +4 bytes. And we can make the overhead of Multi.*Sequence much lower
using embedded arrays, which only the caller can do since it knows the maximum size... (for another
day...)
Also remove SimplePwm's 2nd copy of SingleChannelStateSequence. It served no purpose.
Saves 1992 bytes of BSS and 24 bytes of RAM4 (latter probably due to SimplePwm change)
All it wants is to use the main trigger state, so don't bother copying it. Instead, change
PwmConfig to take a const pointer to a Multi.*Sequence, then make all the users adapt. Worse
fallout is that SimplePwm now has its own Multi.*Sequence, but PwmConfig is downgraded to a
pointer, so that's only a net +4 bytes. And we can make the overhead of Multi.*Sequence much lower
using embedded arrays, which only the caller can do since it knows the maximum size... (for another
day...)
Also remove SimplePwm's 2nd copy of SingleChannelStateSequence. It served no purpose.
Saves 1992 bytes of BSS and 24 bytes of RAM4 (latter probably due to SimplePwm change)
* fix simulator
* print out halt reason
* option to close simulator after time
* workflow calls it
* test with the bug still present
* ...and fix the bug
* fix for stepperHbridgeHardware
* new config fields for microstepping
* add stepper dir pin mode to the dialog
* refactor stepper hw dialog & add microstepping panel
* microstepper modes enum
* stepperDcInvertedPins needed by Hellen
* add sleep() for stepper and divisor for pause()
* microstepping impl.
* make unit-tests more happy
* small progress
* fix etb-stepper dlg conflict
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
* big pch energy
* put back ramdisk stub
* tests are happy
* h743 nucleo
* kinetis
* I love deleting code!
* make stepper happy
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* these start themselves now
* dead
* configure ports
* start serial
* dead
* minimal pins
* simulator logging works
* why not enable lua
* speeeeeed
* start lua
* spammy print
* remove callback parameter from cj125
* remove from ext
* remove stateChangeCallback
* alt doesn't need that
* demorgan
* remove call
* bad cut/paste
* check the actual pin in the test
* hip9011: move hipCs out of EnginePins to hip9011 driver
* hip9011: cleanup debug output, save few RAM bytes
* Supress few signed vs unsigned warnings
* ChibiOS: add support for STM32F765
This chip is used on Subaru EG33 p'n'p RusEFI board from Dron_Gus
* drivers: gpio: mc33810: commulative update
- use BIT macro
- fix wake-up method
- fix order of arguments in _add function
* port: stm32f4/7: detectCanDevice check for enabled interfaces only
* ADC: fix internal array size
internalAdcIndexByHardwareIndex should be EFI_ADC_LAST_CHANNEL size
couse adc_channel_e is used as index
* status LEDs: support status LEDs that driven by low level
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
* fix unregister api for gpio
* consumers
* guard with a critical section
* index
* guard less
* unregister under lock
* fix reinit
* dead flag
* fix most tests
* initialize properly
* initialize properly
* assertions in tests
* fix message
* we must lock earlier to be truly safe
* this was using huge memory
* devirtualize
* switch pump fsio logic
* value collision
* fuel pump in tests
* mock time since trigger
* test fp
* init pin in test
* fix gpio outputs in tests
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* switch to CriticalSectionLocker
* that's just about all
* clean up last usage
* include hpp for sim
* need the cpp wrappers in the makefile too
* include dir
* include
David Holdeman
rusefillc
Andrey
Scott Smith
Matthew Kennedy
Andreika
Andrey G