fome-fw/firmware/hw_layer
Matthew Kennedy 8d382d604d static 2025-03-13 12:29:33 -07:00
..
adc progress on dual MAP 2025-03-07 00:13:41 -08:00
algo
atwinc1500 static 2025-03-13 12:29:33 -07:00
digital_input dead line 2024-12-12 15:13:36 -08:00
drivers dead L9779 driver 2025-03-03 01:03:44 -08:00
mass_storage enable PORT_ENABLE_GUARD_PAGES on H7 2025-02-03 17:24:30 -08:00
microsecond_timer MicrosecondTimerWatchdogController was doing the wrong math 2024-12-28 14:05:29 -08:00
openblt enable openblt on H7 (#229) 2025-03-07 12:05:45 -08:00
ports format usb 2025-03-08 13:15:24 -08:00
sensors Revert "lps25 multi byte read" 2025-02-08 13:14:56 -08:00
backup_ram.h put all backup data in SRAM, not in RTC registers 2024-02-06 11:43:13 -08:00
debounce.cpp EFI_ACTIVE_CONFIGURATION_IN_FLASH 2024-08-07 12:09:30 -07:00
debounce.h format 2024-09-25 14:05:08 -07:00
flash_int.h extract STM32 flash common 2023-08-27 15:31:29 -07:00
hardware.cpp Remove sensor chart (#568) 2025-03-07 03:28:29 -08:00
hardware.h oops, some boards needed spi prescaler func 2024-02-27 16:56:32 -08:00
hw_layer.mk sorry ADC trigger, your performance was never proven and you're in the way now 2024-08-06 23:21:36 -07:00
io_pins.cpp GPIO_NULL, EFI_ERROR_CODE 2024-12-28 15:07:29 -08:00
io_pins.h GPIO_NULL, EFI_ERROR_CODE 2024-12-28 15:07:29 -08:00
kline.cpp
kline.h prep for small can board 2023-08-29 00:57:57 -07:00
main_hardfault.c Properly chain fault handlers when we hit bkpt instruction 2025-02-17 01:21:15 -08:00
main_hardfault_asm.S OpenBLT-based USB serial bootloader (#228) 2023-08-27 10:30:02 -07:00
mc33816.cpp pt2001 typo 2023-05-15 13:28:50 -07:00
mc33816.h
mmc_card.cpp happy simulator 2025-03-12 22:49:20 -07:00
mmc_card.h
pin_repository.cpp GPIO_NULL, EFI_ERROR_CODE 2024-12-28 15:07:29 -08:00
pin_repository.h cleanup 2024-09-03 13:34:36 -07:00
readme.md
rtc_helper.cpp compile-time enforcement of printf strings 2024-06-10 00:51:14 -07:00
rtc_helper.h
smart_gpio.cpp dead L9779 driver 2025-03-03 01:03:44 -08:00
smart_gpio.h dead L9779 driver 2025-03-03 01:03:44 -08:00
stepper.cpp min stepper voltage feature 2024-10-29 14:03:27 -07:00
stepper.h tabs 2024-03-12 15:28:52 -07:00
stepper_dual_hbridge.cpp ObdCode is enum class (#77) 2023-04-12 23:44:33 -07:00