lumenpnp/bom.csv

27 KiB

1Part NameImageQuantityPart TypeSource 1Source 2OptionalNote
2front-left-leg1FDMDownload all 3D printed parts at the link at the top of the page.
3nozzle-rack1FDMhttps://opulo.io/products/cp40-pnp-nozzleDownload all 3D printed parts at the link at the top of the page.
4datum-board-mount1FDMDownload all 3D printed parts at the link at the top of the page.
5peek-cable-clamp3FDMDownload all 3D printed parts at the link at the top of the page.
6extrusion-cable-clip16FDMDownload all 3D printed parts at the link at the top of the page.
7belt-tension-arm3FDMDownload all 3D printed parts at the link at the top of the page.
8bottom-camera-mount1FDMDownload all 3D printed parts at the link at the top of the page.
9bottom-light-mount1FDMDownload all 3D printed parts at the link at the top of the page.Print in white filament. This part is used as a light diffuser.
10bottom-camera-cover1FDMDownload all 3D printed parts at the link at the top of the page.
11back-leg2FDMDownload all 3D printed parts at the link at the top of the page.
12front-right-leg1FDMDownload all 3D printed parts at the link at the top of the page.
13aux-staging-plate-foot1FDMhttps://www.opulo.io/products/staging-plateDownload all 3D printed parts at the link at the top of the page.This part is used for stabilizing any additional staging-plate(s) attached to the LumenPnP. Attaches to a staging-plate with 1x M3x14mm bolt and 1x M3-square-nut.
14x-gantry-front1FDMDownload all 3D printed parts at the link at the top of the page.
15belt-clamp6FDMDownload all 3D printed parts at the link at the top of the page.
16z-gantry-backplate-left1FDMDownload all 3D printed parts at the link at the top of the page.Print in red PLA
17x-idler-mount1FDMDownload all 3D printed parts at the link at the top of the page.
18x-motor-mount1FDMDownload all 3D printed parts at the link at the top of the page.
19z-gantry2FDMDownload all 3D printed parts at the link at the top of the page.
20y-gantry-left1FDMDownload all 3D printed parts at the link at the top of the page.
21z-gantry-backplate-right1FDMDownload all 3D printed parts at the link at the top of the page.Print in blue PLA
22x-gantry-back1FDMDownload all 3D printed parts at the link at the top of the page.
23back-leg-extension2FDMDownload all 3D printed parts at the link at the top of the page.
24front-leg-extension2FDMDownload all 3D printed parts at the link at the top of the page.
25top-light-mount1FDMDownload all 3D printed parts at the link at the top of the page.Print in white filament. This part is used as a light diffuser.
26control-box1FDMDownload all 3D printed parts at the link at the top of the page.
27control-box-lid1FDMDownload all 3D printed parts at the link at the top of the page.
28y-gantry-right1FDMDownload all 3D printed parts at the link at the top of the page.
29squaring-bracket1FDMDownload all 3D printed parts at the link at the top of the page.For use with aligning the front and rear feeder rails to staging plates.
30nozzle-camera-mask2FDMDownload all 3D printed parts at the link at the top of the page.This part can be pressed onto a nozzle holder to prevent any bright objects above the machine from interfering with bottom vision. Should be printed in a dark color.
31y-limit-striker1FDMDownload all 3D printed parts at the link at the top of the page.
32blade122FDMhttps://www.opulo.io/products/slot-harness-kitDownload all 3D printed parts at the link at the top of the page.
33blade132FDMhttps://www.opulo.io/products/slot-harness-kitDownload all 3D printed parts at the link at the top of the page.
34static-camera-foot1FDMDownload all 3D printed parts at the link at the top of the page.This part is the foot for use with the bottom-camera-mount that would be installed on a LumenPnP's primary staging-plate.
35cable-splay1FDMDownload all 3D printed parts at the link at the top of the page.
36board-support8FDMhttps://www.opulo.io/products/getting-started-kitDownload all 3D printed parts at the link at the top of the page.This part is meant to help support a PCB mounted on a staging plage. Print in PLA.
37board-mount-static4FDMhttps://www.opulo.io/products/getting-started-kitDownload all 3D printed parts at the link at the top of the page.This part is meant to help hold a PCB on the staging plate. Use 1x M3x10mm hex head screw and 1x M3 wing nut for each one. Print in PLA.
38board-mount-dynamic4FDMhttps://www.opulo.io/products/getting-started-kitDownload all 3D printed parts at the link at the top of the page.This part is meant to help hold a PCB on the staging plate. Use 1x M3x10mm hex head screw and 1x M3 wing nut for each one. Print in PETG.
398mm-strip-feeder1FDMhttps://www.opulo.io/products/lumenpnp-strip-feeder?variant=44789644132539Download all 3D printed parts at the link at the top of the page.This part can be mounted to the staging plate and hold 8mm tape. Use 2x M3x10mm-ultra-low-profile-button-head screws and 2x M3 wing nuts to attach it.
4012mm-strip-feeder-FDMhttps://www.opulo.io/products/lumenpnp-strip-feeder?variant=44789644198075Download all 3D printed parts at the link at the top of the page.OptionalThis part can be mounted to the staging plate and hold 12mm tape. Use 2x M3x10mm-ultra-low-profile-button-head screws and 2x M3 wing nuts to attach it.
4116mm-strip-feeder-FDMhttps://www.opulo.io/products/lumenpnp-strip-feeder?variant=44789644230843Download all 3D printed parts at the link at the top of the page.OptionalThis part can be mounted to the staging plate and hold 16mm tape. Use 2x M3x10mm-ultra-low-profile-button-head screws and 2x M3 wing nuts to attach it.
4224mm-strip-feeder-FDMhttps://www.opulo.io/products/lumenpnp-strip-feeder?variant=44789644263611Download all 3D printed parts at the link at the top of the page.OptionalThis part can be mounted to the staging plate and hold 24mm tape. Use 2x M3x10mm-ultra-low-profile-button-head screws and 2x M3 wing nuts to attach it.
4332mm-strip-feeder-FDMhttps://www.opulo.io/products/lumenpnp-strip-feeder?variant=44789644296379Download all 3D printed parts at the link at the top of the page.OptionalThis part can be mounted to the staging plate and hold 32mm tape. Use 2x M3x10mm-ultra-low-profile-button-head screws and 2x M3 wing nuts to attach it.
44adj-strip-feeder-FDMhttps://www.opulo.io/products/lumenpnp-strip-feeder?variant=44789644329147Download all 3D printed parts at the link at the top of the page.OptionalThis 2-piece part can be mounted to the staging plate and adjusted to hold varying widths of tape (32mm+). Each side uses 2x M3x10mm-ultra-low-profile-button-head screws and 2x M3 wing nuts for attachment.
45PLA-filamenthttps://90a1c75758623581b3f8-5c119c3de181c9857fcb2784776b17ef.ssl.cf2.rackcdn.com/611532_989269_03_front_zoom.jpg1.75FILhttps://www.microcenter.com/product/611532/inland-175mm-black-pla-3d-printer-filament-1kg-spool-(22-lbs)Units in kg. Print top-light-mount and bottom-light-mount in a white. Print z-gantry-backplate-left in red and ...-right in blue.
46PETG-filamenthttps://90a1c75758623581b3f8-5c119c3de181c9857fcb2784776b17ef.ssl.cf2.rackcdn.com/503741_715474_01_front_zoom.jpg0.05FILhttps://www.microcenter.com/product/503741/inland-175mm-white-petg-3d-printer-filament-1kg-spool-%2822-lbs%29Units in kg. Use a white material. Use for universal PCB fixture components.
47m3x10-thumb-screwhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/m3x10-thumb-screw.jpg?v=17232327722FSTClick link above to download source.This is a custom part designed by Opulo. Generic M3x10 bolts can be used instead if prefered.
48DIN315 Nut M3 Wingnuthttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3-wing-nut.png?v=169626701812FSThttps://www.aliexpress.com/item/2251832780237629.htmlDIN315 - for mounting universal-PCB-fixture components (8), nozzle-rack (2), and 8mm-strip-feeder (2) to a staging-plate
49DIN557 Nut M5https://cdn.shopify.com/s/files/1/0570/4256/7355/files/DIN557_Nut_M5.jpg?v=17231352427FSThttps://www.mcmaster.com/96887A331/Square nut
50DIN562 Nut M3https://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3-square-nut.png?v=16962667461FSThttps://www.mcmaster.com/97259A101/Square nut
51DIN985 Nut M5https://cdn.shopify.com/s/files/1/0570/4256/7355/files/M5-lock-nut.png?v=16962669708FSThttps://www.mcmaster.com/94645A102/Lock nut
52M3x12mm-self-tapping-flat-headhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3x12mm-self-tapping-flat-head.jpg?v=17232377374FSThttps://www.mcmaster.com/95893A403/Flat head, self tapping - for installing top-light-mount (2) and xy-limit-switch (2). Listed source requires a T8 torx driver.
53ISO10642 Screw M3x16https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO10642_Screw_M3x16.png?v=17231376371FSThttps://www.mcmaster.com/91294A134/Flat head, machine screw - for use with adjusting z-limit-switch actuation point on z-gantry-backplate-right
54M3x8mm-self-tapping-flat-headhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3x8mm-self-tapping-flat-head.jpg?v=172313620020FSThttps://www.amazon.com/Tapping-Purpose-Stainless-Flathead-Furniture/dp/B0CKYHMTFC/Flat head, self tapping - for installing blade13-PCB and blade12-PCB onto 3D prints
55ISO10642 Screw M5x16https://cdn.shopify.com/s/files/1/0570/4256/7355/files/m5x16-flat-head.png?v=17231779478FSThttps://www.mcmaster.com/91294A212/Flat head, machine screw
56ISO4017 Screw M3x10https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4017_Screw_M3x10.png?v=172313853010FSThttps://www.mcmaster.com/91280A041/Hex head, machine screw - for mounting universal-PCB-fixture components (8), nozzle-rack (2), and 8mm-strip-feeder (2) to a staging-plate
57ISO4032 Nut M3https://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3-hex-nut.png?v=169626663516FSThttps://www.mcmaster.com/90592A085/
58ISO4032 Nut M5https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4032_Nut_M5.jpg?v=172313522831FSThttps://www.amazon.com/FOCMKEAS-M5-0-8-Hexagon-Fasteners-Hardware/dp/B0CR7XXM7G/
59ISO4762 Screw M2.5https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4762_Screw_M2.5.png?v=172349220112FSThttps://www.mcmaster.com/91292A012/Socket head
60ISO4762 Screw M3x16https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4762_Screw_M3x16.png?v=172313779315FSThttps://www.mcmaster.com/91292A115Socket head
61ISO4762 Screw M3x30https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4762_Screw_M3x30.png?v=17231377432FSThttps://www.mcmaster.com/91292A022Socket head
62ISO4762 Screw M5x10https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4762_Screw_M5x10.png?v=172313800454FSThttps://www.mcmaster.com/90128A234/Socket head
63ISO4762 Screw M5x16https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4762_Screw_M5x16.png?v=17231380659FSThttps://www.mcmaster.com/91290A232/Socket head
64ISO4762 Screw M5x25https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO4762_Screw_M5x25.png?v=17231381167FSThttps://www.mcmaster.com/90128A249/Socket head
65ISO4762 Screw M5x40https://cdn.shopify.com/s/files/1/0570/4256/7355/files/M5x40mm-socket-head.png?v=16962669707FSThttps://www.mcmaster.com/91292A194/Socket head
66M3x12mm-self-tapping-button-headhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3x12mm-self-tapping-button-head.jpg?v=172313828012FSThttps://www.aliexpress.us/item/3256803118644196.htmlButton head, self tapping - for installing limit switch and linear rails onto x-gantry-front (8), and motherboard-rev05 onto mobo-mount (4).
67ISO7380-1 Screw M3x14https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO7380-1_Screw_M3x14.png?v=17231374474FSThttps://www.mcmaster.com/92095A168/Button head - used for installing peek-cable-clamp (3) and aux-staging-plate-foot (1)
68ISO7380-1 Screw M3x8https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO7380-1_Screw_M3x8.png?v=172313587348FSThttps://www.mcmaster.com/92095A181/Button head
69ISO7380-1 Screw M5x8https://cdn.shopify.com/s/files/1/0570/4256/7355/files/ISO7380-1_Screw_M5x8.png?v=172313787420FSThttps://www.mcmaster.com/92095A207/Button head
70M5-tslot-nuthttps://m.media-amazon.com/images/I/51AI2rmWaML._AC_SX466_.jpg60FSThttps://m.media-amazon.com/images/I/51AI2rmWaML._AC_SX466_.jpg
71M3-cap-nuthttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3-cap-nut.png?v=16962666363FSThttps://www.mcmaster.com/94000A330
72m5-thumb-screwhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/m5x10-thumb-screw.png?v=17231485611FSThttps://www.amazon.com/dp/B0C6RSH8JZ/
73M3x8-ULP-BHCShttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/M3x10mm-ultra-low-profile-button-head.jpg?v=16959485102FSThttps://us.misumi-ec.com/vona2/detail/221005020136/?HissuCode=CSHELHF-ST3B-M3-10https://www.mcmaster.com/90383A104/Source 1 is a 2mm hex socket head available only in high volume source. Source 2 is a flat head drive available in low volume.
74525mm-MGN12Hhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/MGN12H-525mm.png?v=16933266001MISChttps://www.opulo.io/products/mgn12h-linear-rail-kitEach rail includes 1pcs MGN12H-linear-rail-carriage
75550mm-MGN12Hhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/MGN12H-550mm.png?v=16933265132MISChttps://www.opulo.io/products/mgn12h-linear-rail-kitEach rail includes 1pcs MGN12H-linear-rail-carriage
76m3_t-nut_bar-525mmhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/m3_t-nut_bar-525mm.jpg?v=17232195943MCMhttps://www.opulo.io/products/mgn12h-linear-rail-kitThis is custom made by LDO for Opulo. Individuals self-sourcing their machine can instead use an additional 36x m3-t-nut.
77n40-nozzlehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/n40-nozzle.png?v=17231522331MCMhttps://opulo.io/products/cp40-pnp-nozzle
78n24-nozzlehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/n24-nozzle.png?v=17231522331MCMhttps://opulo.io/products/cp40-pnp-nozzle
79n08-nozzlehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/n08-nozzle.png?v=17231522331MCMhttps://opulo.io/products/cp40-pnp-nozzle
80n75-nozzlehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/n75-nozzle.png?v=17231522331MCMhttps://opulo.io/products/cp40-pnp-nozzle
81n14-nozzlehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/n14-nozzle.png?v=17231522331MCMhttps://opulo.io/products/cp40-pnp-nozzle
82n045-nozzlehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/n045-nozzle.png?v=17231522331MCMhttps://opulo.io/products/cp40-pnp-nozzle
83GT2-idlerhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/GT2-idler.jpg?v=17232159984MISChttps://opulo.io/products/lumenpnp-gt2-belt-and-pulley-kithttps://www.amazon.com/WINSINN-Aluminum-Timing-Pulley-Printer/dp/B07BPGYX3G/ref=psdc_16411441_t1_B078SD2XGL
84GT2-pulleyhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/GT2-pulley.jpg?v=17232160264MISChttps://opulo.io/products/lumenpnp-gt2-belt-and-pulley-kithttps://www.amazon.com/WINSINN-Aluminum-Synchronous-Timing-Printer/dp/B077GNZK3J/ref=psdc_16411441_t1_B07JJLZTLV?th=1
85z-belt-loophttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/z-belt-loop.jpg?v=17231465261MISChttps://opulo.io/products/lumenpnp-gt2-belt-and-pulley-kit6mm wide, 260mm length, 130 teeth, GT2 profile.
86gt2-timing-belthttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/gt2-timing-belt.jpg?v=17232266005MISChttps://opulo.io/products/lumenpnp-gt2-belt-and-pulley-kitUnits in meters.
87NEMA17-stepperhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/NEMA17-stepper.jpg?v=17232195944MTRhttps://www.opulo.io/products/nema-17-stepper-motor-4-pack
88nozzle-holderhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/nozzle-holder.jpg?v=17232179392MCMhttps://www.opulo.io/products/lumenpnp-toolhead-kit
89nozzle-holder-inner-bodyhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/nozzle-holder-inner-body.jpg?v=17101853362MISCOptionalClick link above to download source - for use with building 2x nozzle-holder from scratch
90nozzle-holder-outer-bodyhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/nozzle-holder-outer-body.jpg?v=17101853362MISCOptionalClick link above to download source - for use with building 2x nozzle-holder from scratch
91nozzle-holder-springhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/spr-0002.png?v=17101853362MISChttps://www.leespring.com/compression-springs?search=LCM050C03MOptionalClick link above to download source - for use with building 2x nozzle-holder from scratch
924mmIDx0.6mmCS-o-ringhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/4mmIDx0.6mmCS-o-ring.jpg?v=17101853364MISChttps://www.polymax.co.uk/o-ring-4mm-id-x-0-6mm-cs-nitrile-70-shaOptionalClick link above to download source - for use with building 2x nozzle-holder from scratch
932mm-pinhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/2mm-pin.jpg?v=17101854812MISChttps://www.mcmaster.com/97049A101/OptionalISO 2338-H8 undersized 2mm dowel pin - for use with building 2x nozzle-holder from scratch
94precision-machine-oilhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/DeoxIT_X10S_Precison_Oil.jpg?v=17101853360.02MISChttps://www.mcmaster.com/2278N13/OptionalUnit in milliliters - for use with building nozzle-holder from scratch
95NEMA11-hollow-shaft-stepperhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/NEMA11-hollow-shaft-stepper.jpg?v=17232170852MTRhttps://www.opulo.io/products/lumenpnp-toolhead-kit
96lubricant-packethttps://www.super-lube.com/content/images/thumbs/0000300_multi-purpose-synthetic-grease-nlgi-00-with-syncolon-8234000_359.jpeg1MISChttps://www.opulo.io/products/lumenpnp-toolhead-kithttps://www.super-lube.com/multi-purpose-synthetic-grease-with-syncolon-ptfe-82340Lubricant is required for the O-rings on the nozzle holder. Before use, apply lubricant to the end of the nozzle holder and insert into every nozzle tip until the lubricant has coated the inside of the tip and the resistance decreases. Do NOT use white lithium grease for this; it can damage the O-rings.
97rotary-pneumatic-adapterhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/rotary-pneumatic-adapter.jpg?v=17234919442MISChttps://www.opulo.io/products/lumenpnp-toolhead-kit
98solenoid-valvehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/solenoid-valve.jpg?v=17234920522PNUhttps://www.opulo.io/products/lumenpnp-control-box
99vacuum-pumphttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/vacuum-pump.jpg?v=17234920522PNUhttps://www.opulo.io/products/lumenpnp-control-box
100reducing-union-tee-4-6-4https://cdn.shopify.com/s/files/1/0570/4256/7355/files/reducing-union-tee-4-6-4.jpg?v=17231478732PNUhttps://www.opulo.io/products/lumenpnp-control-boxhttps://www.aliexpress.us/item/3256806098835675.html?spm=a2g0o.order_list.order_list_main.5.54ac1802U8K7XM&gatewayAdapt=glo2usa
101mobo-REV05https://cdn.shopify.com/s/files/1/0570/4256/7355/files/mobo-REV05.png?v=17231424291PCAhttps://www.opulo.io/products/lumenpnp-control-boxClick link above to download source
102pump1-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/pump1-harness.jpg?v=17232385201CHAhttps://www.opulo.io/products/lumenpnp-control-boxClick link above to download source. Left Pump.
103pump2-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/pump2-harness.jpg?v=17232385201CHAhttps://www.opulo.io/products/lumenpnp-control-boxClick link above to download source. Right Pump.
104soft-pvc-tubing-6x4-redhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/soft-pvc-tubing-6x4-red.jpg?v=17232195930.15PNUhttps://www.opulo.io/products/lumenpnp-control-boxUnits in meters. Used for left side pnumatics.
105soft-pvc-tubing-6x4-bluehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/soft-pvc-tubing-6x4-blue.jpg?v=17232195930.15PNUhttps://www.opulo.io/products/lumenpnp-control-boxUnits in meters. Used for right side pnumatics.
106usb-b-to-usb-a-cablehttps://m.media-amazon.com/images/I/71bhL-Kx6+L._AC_SL1500_.jpg1CHAhttps://www.opulo.io/products/lumenpnp-control-boxhttps://a.co/d/gq71q7PWe recommend a 2m long cable.
107drag-chain-endhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/drag-chain-end.jpg?v=17232195934MISChttps://opulo.io/products/lumenpnp-drag-chain-assembly-kit15mm x 30mm drag chain end link with 2x M5 mounting holes
108drag-chain-linkhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/drag-chain-link.jpg?v=172321959464MISChttps://opulo.io/products/lumenpnp-drag-chain-assembly-kit15mm x 30mm drag chain middle links
109x-cable-chain-supporthttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/x-cable-chain-support.jpg?v=17232327711PCBhttps://opulo.io/products/lumenpnp-drag-chain-assembly-kitClick link above to download source
110x-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/x-harness.jpg?v=17232222581CHAhttps://opulo.io/products/lumenpnp-drag-chain-assembly-kitClick link above to download source
111head-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/head-harness.jpg?v=17232222581CHAhttps://opulo.io/products/lumenpnp-drag-chain-assembly-kitClick link above to download source
112top-camera-cablehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/top-camera-cable.jpg?v=17232222581CHAhttps://opulo.io/products/lumenpnp-drag-chain-assembly-kitClick link above to download source
113pu-tube-4x2.5-redhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/pu-tube-4x2.5-red.jpg?v=17232199992PNUhttps://opulo.io/products/lumenpnp-drag-chain-assembly-kitUnit in meters.
114pu-tube-4x2.5-bluehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/pu-tube-4x2.5-blue.jpg?v=17232199992PNUhttps://opulo.io/products/lumenpnp-drag-chain-assembly-kitUnit in meters.
115linear-rail-100mmhttps://m.media-amazon.com/images/I/51WG8VNpIYL._AC_SX466_.jpg2MISChttps://opulo.io/products/lumenpnp-z-axis-linear-rail-sethttps://amzn.to/2Y2p8vJEach rail includes 1pcs MGN9C-linear-rail-carriage
116datum-boardhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/DatumBoard.png?v=17232142431PCBhttps://opulo.io/products/lumenpnp-datum-boardClick link above to download source
117bottom-ring-lighthttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/Ringlight-Bottom.jpg?v=17232146081PCAhttps://opulo.io/products/lumenpnp-ring-light-setClick link above to download source
118top-ring-lighthttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/Ringlight-Top.jpg?v=17232146081PCAhttps://opulo.io/products/lumenpnp-ring-light-setClick link above to download source
119xy-limithttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/xy-limit.png?v=17231402701PCAhttps://opulo.io/products/lumenpnp-endstop-setClick link above to download source
120z-limithttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/z-limit.png?v=17231402691PCAhttps://opulo.io/products/lumenpnp-endstop-setClick link above to download source
121top-camerahttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/top-camera.jpg?v=17232227711PCAhttps://opulo.io/products/openpnp-usb-camera-set
122bottom-camerahttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/bottom-camera.jpg?v=17232227711PCAhttps://opulo.io/products/openpnp-usb-camera-set
123staging-platehttps://cdn.shopify.com/s/files/1/0570/4256/7355/products/pcb-staging-plate-alpha_1080x.png?v=16540968152PCBhttps://opulo.io/products/staging-plateRemove camera knock-out plate from center of PCB if using as primary-staging-plate.
124y1-motor-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/y1-motor-harness.jpg?v=17232222591CHAhttps://opulo.io/products/lumenpnp-frame-cable-harness-setClick link above to download source
125y2-motor-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/y2-motor-harness.jpg?v=17232222591CHAhttps://opulo.io/products/lumenpnp-frame-cable-harness-setClick link above to download source
126bottom-light-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/bottom-light-harness.jpg?v=17232222581CHAhttps://opulo.io/products/lumenpnp-frame-cable-harness-setClick link above to download source
127bottom-camera-cablehttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/bottom-camera-cable.jpg?v=17232222581CHAhttps://opulo.io/products/lumenpnp-frame-cable-harness-setClick link above to download source
128mobo-blade1-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/mobo-blade1-harness.jpg?v=17232222581CHAhttps://www.opulo.io/products/slot-harness-kitClick link above to download source
129blade2-blade3-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/blade2-blade3-harness.jpg?v=17232222581CHAhttps://www.opulo.io/products/slot-harness-kitClick link above to download source
130blade-jumper-harnesshttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/blade-jumper-harness_ph.jpg?v=17232224492CHAhttps://www.opulo.io/products/slot-harness-kitClick link above to download source
131blade12-PCBhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/blade12-PCB.jpg?v=17232278352PCAhttps://www.opulo.io/products/slot-harness-kitClick link above to download source. Make one PCB for slot #1 - #12 and the other for #26 - #37.
132blade13-PCBhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/blade13-PCB.jpg?v=17232278352PCAhttps://www.opulo.io/products/slot-harness-kitMake one PCB for slot #13 - #25 and the other for #38 - #50.
13324v-power-supplyhttps://avacomtech.com/pub/media/catalog/product/cache/image/1000x1320/e9c3970ab036de70892d86c6d221abfe/w/e/web1_2.png1PSUhttps://www.opulo.io/products/lumenpnp-24v-6a-power-supplyA power supply that can output at least 6A @ 24v DC is recommended. Assumed that requisite AC power cord is included.
134zip-tiehttps://www.divers-supply.com/media/catalog/product/cache/04f855d5dde875e44e832ab401f00a9d/image/70002c3c4/zip-tie-each.jpeg2MISChttps://www.amazon.com/Hmrope-Premium-Plastic-Strength-Self-Locking/dp/B07TG9VMWY/Zip ties that are approx 200mm in length are recommended.
135rubber-bandhttps://img.uline.com/is/image/uline/S-15809?$Small$4MISChttps://www.uline.com/Product/Detail/S-15809/Desk-Supplies/33-Latex-Free-Rubber-Bands-3-1-2-x-1-8It's best to use silicone rubber bands that do not dry out.
136rubber-feethttps://m.media-amazon.com/images/I/51W3zGnrQzL._AC_SL1000_.jpg8MISChttps://opulo.io/products/lumenpnp-frame-kithttps://www.amazon.com/gp/product/B088HGQSZT/10mm dia adhesive-backed rubber feet for use on the front-left-leg, front-right-leg, and 2x back-leg
137vslot-extrusion-20mmx20mmx600mmhttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/vslot-extrusion-20mmx20mmx600mm.jpg?v=17232165887EXThttps://opulo.io/products/lumenpnp-frame-kit
138corner-brackethttps://cdn.shopify.com/s/files/1/0570/4256/7355/files/corner-bracket.jpg?v=17232163356MCMhttps://opulo.io/products/lumenpnp-frame-kithttps://www.mcmaster.com/5537T498/