Adding osmo* stack for 2G (radio+core) & 3G (core)

Dockerfile

@@ -244,6 +244,7 @@ RUN ./entrypoint.sh srsran4G_5GNSA_soft_install
 RUN ./entrypoint.sh srsran5GSA_soft_install
 RUN ./entrypoint.sh Open5GS_soft_install
 RUN ./entrypoint.sh pycrate_soft_install
+RUN ./entrypoint.sh osmobts_suite_soft_install
 
 RUN mkdir -p /sdrtools/
 COPY run /sdrtools/run

Dockerfiles/telecom.docker

@@ -15,6 +15,7 @@ RUN apt-fast update
 
 COPY scripts /root/scripts/
 COPY rules /root/rules/
+COPY config /root/config
 
 WORKDIR /root/scripts/
 RUN chmod +x entrypoint.sh
@@ -27,6 +28,7 @@ RUN ./entrypoint.sh srsran4G_5GNSA_soft_install
 RUN ./entrypoint.sh srsran5GSA_soft_install
 RUN ./entrypoint.sh Open5GS_soft_install
 RUN ./entrypoint.sh pycrate_soft_install
+RUN ./entrypoint.sh osmobts_suite_soft_install
 # More to come!
 
 RUN mkdir -p /sdrtools/

config/osmobts/nitb/osmo-bsc.cfg

@@ -0,0 +1,53 @@
+network
+ network country code 901
+ mobile network code 70
+ bts 0
+  type sysmobts
+  band GSM-1800
+  location_area_code 23
+  # This is the unit id that has to match the BTS configuration
+  ip.access unit_id 1800 0
+  codec-support fr hr amr
+  gprs mode gprs
+  gprs nsvc 0 remote ip 192.168.0.9
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 nsvci 1800
+  gprs nsei 1800
+  gprs cell bvci 1800
+  trx 0
+   rf_locked 0
+   arfcn 868
+   nominal power 23
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+   timeslot 1
+    phys_chan_config SDCCH8
+   timeslot 2
+    phys_chan_config TCH/F_TCH/H_PDCH
+   timeslot 3
+    phys_chan_config TCH/F_TCH/H_PDCH
+   timeslot 4
+    phys_chan_config TCH/F_TCH/H_PDCH
+   timeslot 5
+    phys_chan_config TCH/F_TCH/H_PDCH
+   timeslot 6
+    phys_chan_config TCH/F_TCH/H_PDCH
+   timeslot 7
+    phys_chan_config PDCH
+e1_input
+ e1_line 0 driver ipa
+msc 0
+ mgw remote-ip 192.168.0.9
+ mgw remote-port 12427
+ allow-emergency deny
+ codec-list hr3
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-ggsn.cfg

@@ -0,0 +1,24 @@
+log stderr
+ logging level all debug
+ logging filter all 1
+ logging print category 1
+ggsn ggsn0
+ gtp bind-ip 192.168.0.42
+ apn internet
+  tun-device apn0
+  type-support v4
+  ip dns 0 192.168.0.1
+  ip dns 1 9.9.9.9
+  ip prefix dynamic 192.168.42.0/24
+  no shutdown
+ default-apn internet
+ no shutdown ggsn
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-hlr.cfg

@@ -0,0 +1,12 @@
+hlr
+ ussd route prefix *#100# internal own-msisdn
+ ussd route prefix *#101# internal own-imsi
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all debug

config/osmobts/nitb/osmo-hnbgw.cfg

@@ -0,0 +1,17 @@
+hnbgw
+ iuh
+  local-ip 192.168.0.9
+ mgcp
+  mgw remote-ip 192.168.0.9
+  mgw remote-port 22427
+ pfcp
+  remote-addr 192.168.0.9
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-mgw-for-bsc.cfg

@@ -0,0 +1,16 @@
+mgcp
+ bind ip 192.168.0.9
+ # default port is 2427 (is used for MSC's MGW)
+ bind port 12427
+line vty
+ # default VTY interface is on 127.0.0.1 (used for MSC's MGW)
+ bind 127.0.0.2
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-mgw-for-hnbgw.cfg

@@ -0,0 +1,14 @@
+mgcp
+ bind ip 192.168.0.9
+ bind port 22427
+line vty
+ bind 127.0.0.3
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-mgw-for-msc.cfg

@@ -0,0 +1,13 @@
+mgcp
+ bind ip 192.168.0.9
+line vty
+ bind 127.0.0.1
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-msc.cfg

@@ -0,0 +1,16 @@
+network
+ network country code 901
+ mobile network code 70
+msc
+ mgw remote-ip 192.168.0.9
+ # For nano3G:
+ iu rab-assign-addr-enc x213
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-sgsn.cfg

@@ -0,0 +1,19 @@
+sgsn
+ gtp local-ip 192.168.0.9
+ ggsn 0 remote-ip 192.168.0.42
+ ggsn 0 gtp-version 1
+ auth-policy remote
+ gsup remote-ip 127.0.0.1
+ns
+ bind udp some
+  listen 192.168.1.20 23000
+  accept-ipaccess
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-stp.cfg

@@ -0,0 +1,13 @@
+cs7 instance 0
+ xua rkm routing-key-allocation dynamic-permitted
+ listen m3ua 2905
+  accept-asp-connections dynamic-permitted
+
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/osmo-upf.cfg

@@ -0,0 +1,15 @@
+pfcp
+ local-addr 192.168.0.9
+nft
+ # netfilter requires no specifc configuration
+gtp
+ # if encaps/decaps of GTP to "the internet" is required, uncomment the following line:
+ #dev create apn0
+log stderr
+ logging filter all 1
+ logging print extended-timestamp 1
+ logging print category 1
+ logging print category-hex 0
+ logging print level 1
+ logging print file basename last
+ logging level set-all info

config/osmobts/nitb/vty

@@ -0,0 +1,58 @@
+#!/usr/bin/expect -f
+set vty [lindex $argv 0]
+set host localhost
+switch $vty {
+ hlr { set port 4258 }
+ bsc { set port 4242 }
+ mgw { set port 4243 }
+ mgw2 {
+        set host 127.0.0.2
+        set port 4243
+      }
+ sg { set port 4245 }
+ msc { set port 4254 }
+ sip { set port 4256 }
+ gg { set port 4260 }
+ osmo-hlr { set port 4258 }
+ osmo-bsc { set port 4242 }
+ osmo-mgw { set port 4243 }
+ osmo-mgw-for-bsc { set port 4243 }
+ osmo-mgw-for-msc {
+        set host 127.0.0.2
+        set port 4243
+      }
+ osmo-sgsn { set port 4245 }
+ osmo-msc { set port 4254 }
+ osmo-sip-connector { set port 4256 }
+ osmo-ggsn { set port 4260 }
+ default { set port 4242 }
+}
+spawn telnet localhost $port
+expect ">"
+send "enable\r"
+expect "#"
+send "logging enable\r"
+expect "#"
+send "logging print category 1\r"
+expect "#"
+send "logging print category-hex 0\r"
+expect "#"
+send "logging print level 1\r"
+expect "#"
+send "logging print file basename last\r"
+expect "#"
+send "logging print extended-timestamp 1\r"
+expect "#"
+send "logging level set-all notice\r"
+expect "#"
+switch $vty {
+ msc {
+  send "logging level mm info\r"
+  expect "#"
+  send "logging level cc info\r"
+  expect "#"
+ }
+}
+send "logging filter all 1\r"
+expect "#"
+interact

config/osmobts/nitb/vty_sticky

@@ -0,0 +1,5 @@
+#!/bin/sh
+while true; do
+        vty $@
+        sleep 3
+done

scripts/telecom_software.sh

@@ -153,7 +153,7 @@ function Open5GS_soft_install() {
 }
 
 function pycrate_soft_install() {
-	[ -d /telecom/5G ] || mkdir -p /telecom
+	[ -d /telecom ] || mkdir -p /telecom
 	cd /telecom
 	goodecho "[+] Cloninig and installing pycrate"
 	installfromnet "git clone https://github.com/pycrate-org/pycrate.git"
@@ -161,4 +161,50 @@ function pycrate_soft_install() {
 	python3 setup.py install
 }
 
+function osmobts_suite_soft_install() {
+	set -e
+    goodecho "[+] Installing OsmoBTS suite dependencies"
+    installfromnet "apt-fast install -y libmnl-dev libpcsclite-dev liburing-dev libtool libgnutls28-dev libtalloc-dev libsctp-dev lksctp-tools libortp-dev dahdi-source libopenr2-dev libc-ares-dev libtonezone-dev libsqlite3-dev"
+
+    install_lib() {
+        local repo_url=$1
+        local repo_dir=$2
+        local configure_opts=$3
+
+        goodecho "[+] Cloning and installing $repo_dir"
+        cd $osmo_src
+        installfromnet "git clone $repo_url" || { echo "Failed to clone $repo_dir"; exit 1; }
+        cd $repo_dir
+        autoreconf -fi || { echo "autoreconf failed for $repo_dir"; exit 1; }
+        ./configure $configure_opts || { echo "configure failed for $repo_dir"; exit 1; }
+        make -j$(nproc) || { echo "make failed for $repo_dir"; exit 1; }
+        #make check || { echo "make check failed for $repo_dir"; exit 1; }
+        make install || { echo "make install failed for $repo_dir"; exit 1; }
+        sudo ldconfig || { echo "ldconfig failed for $repo_dir"; exit 1; }
+    }
+
+    [ -d /telecom/2G/osmocom ] || mkdir -p /telecom/2G/osmocom
+    cd /telecom/2G/osmocom
+    mkdir -p tmp/osmo/src
+    osmo_src=$(pwd)/tmp/osmo/src
+
+    install_lib "https://gitea.osmocom.org/osmocom/libosmocore.git" "libosmocore"
+    install_lib "https://gitea.osmocom.org/osmocom/libosmo-abis.git" "libosmo-abis"
+    install_lib "https://gitea.osmocom.org/osmocom/libosmo-netif.git" "libosmo-netif"
+    install_lib "https://gitea.osmocom.org/osmocom/libosmo-sccp.git" "libosmo-sccp"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/libsmpp34.git" "libsmpp34"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/osmo-mgw.git" "osmo-mgw"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/libasn1c.git" "libasn1c"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/osmo-iuh.git" "osmo-iuh"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/osmo-hlr.git" "osmo-hlr"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/osmo-msc.git" "osmo-msc" "--enable-iu"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/osmo-ggsn.git" "osmo-ggsn"
+    install_lib "https://gitea.osmocom.org/cellular-infrastructure/osmo-sgsn.git" "osmo-sgsn" "--enable-iu"
+
+    # cleaning
+    cd /telecom/2G/osmocom
+    rm -R tmp
+    cp /root/config/osmobts/nitb/* .
+}
+
 ### TODO: more More!