ChibiOS/demos/STM32/RT-STM32G071RB-NUCLEO64
Giovanni Di Sirio 9d05564539 L0 shared IRQ rework, mcuconfs to be updated.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12894 27425a3e-05d8-49a3-a47f-9c15f0e5edd8
2019-07-10 09:35:03 +00:00
..
cfg L0 shared IRQ rework, mcuconfs to be updated. 2019-07-10 09:35:03 +00:00
debug git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12875 27425a3e-05d8-49a3-a47f-9c15f0e5edd8 2019-07-07 06:54:50 +00:00
.cproject STM32G071 demo, only startup. 2019-04-24 06:10:06 +00:00
.project git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12875 27425a3e-05d8-49a3-a47f-9c15f0e5edd8 2019-07-07 06:54:50 +00:00
Makefile EXTIv1 changes. 2019-07-09 08:03:08 +00:00
main.c G0 fixes. 2019-07-07 14:24:19 +00:00
readme.txt STM32G071 demo, only startup. 2019-04-24 06:10:06 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M4 STM32L476.                            **
*****************************************************************************

** TARGET **

The demo runs on an STM32 Nucleo64-L476RG board.

** The Demo **

The demo flashes the board LED using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD2 (USART2, mapped on USB virtual COM port).

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com