Auto-generated configs and docs

2023-01-20 01:51:33 +00:00 · 2023-01-20 01:51:33 +00:00 · 61a19c657b
parent 1c0fb24bd7
commit 61a19c657b
75 changed files with 360 additions and 185 deletions
--- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h
@ -1045,7 +1045,7 @@
 #define SENT_INPUT_COUNT 1
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH snap_13528
+#define SIGNATURE_HASH snap_46130
 #define specs_s_size 12
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
@ -1320,7 +1320,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI 2023.01.18.cypress.snap_13528"
+#define TS_SIGNATURE "rusEFI 2023.01.20.cypress.snap_46130"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
@ -1045,7 +1045,7 @@
 #define SENT_INPUT_COUNT 1
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH snap_38420
+#define SIGNATURE_HASH snap_5886
 #define specs_s_size 12
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
@ -1320,7 +1320,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI 2023.01.18.kin.snap_38420"
+#define TS_SIGNATURE "rusEFI 2023.01.20.kin.snap_5886"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
@ -995,7 +995,7 @@
 #define show_Frankenso_presets false
 #define show_Proteus_presets false
 #define show_test_presets false
-#define SIGNATURE_HASH snap_60674
+#define SIGNATURE_HASH snap_28136
 #define specs_s_size 12
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
@ -1271,7 +1271,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674"
+#define TS_SIGNATURE "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/controllers/generated/rusefi_generated.h
+++ b/firmware/controllers/generated/rusefi_generated.h
@ -1045,7 +1045,7 @@
 #define SENT_INPUT_COUNT 1
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH snap_13528
+#define SIGNATURE_HASH snap_46130
 #define specs_s_size 12
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
@ -1320,7 +1320,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI 2023.01.18.all.snap_13528"
+#define TS_SIGNATURE "rusEFI 2023.01.20.all.snap_46130"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/controllers/generated/signature_48way.h
+++ b/firmware/controllers/generated/signature_48way.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_15511
-#define TS_SIGNATURE "rusEFI 2023.01.18.48way.snap_15511"
+#define SIGNATURE_HASH snap_48253
+#define TS_SIGNATURE "rusEFI 2023.01.20.48way.snap_48253"
--- a/firmware/controllers/generated/signature_all.h
+++ b/firmware/controllers/generated/signature_all.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_13528
-#define TS_SIGNATURE "rusEFI 2023.01.18.all.snap_13528"
+#define SIGNATURE_HASH snap_46130
+#define TS_SIGNATURE "rusEFI 2023.01.20.all.snap_46130"
--- a/firmware/controllers/generated/signature_alphax-2chan.h
+++ b/firmware/controllers/generated/signature_alphax-2chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_43444
-#define TS_SIGNATURE "rusEFI 2023.01.18.alphax-2chan.snap_43444"
+#define SIGNATURE_HASH snap_10590
+#define TS_SIGNATURE "rusEFI 2023.01.20.alphax-2chan.snap_10590"
--- a/firmware/controllers/generated/signature_alphax-4chan.h
+++ b/firmware/controllers/generated/signature_alphax-4chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_9713
-#define TS_SIGNATURE "rusEFI 2023.01.18.alphax-4chan.snap_9713"
+#define SIGNATURE_HASH snap_42267
+#define TS_SIGNATURE "rusEFI 2023.01.20.alphax-4chan.snap_42267"
--- a/firmware/controllers/generated/signature_alphax-8chan.h
+++ b/firmware/controllers/generated/signature_alphax-8chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_43860
-#define TS_SIGNATURE "rusEFI 2023.01.18.alphax-8chan.snap_43860"
+#define SIGNATURE_HASH snap_11198
+#define TS_SIGNATURE "rusEFI 2023.01.20.alphax-8chan.snap_11198"
--- a/firmware/controllers/generated/signature_atlas.h
+++ b/firmware/controllers/generated/signature_atlas.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_49663
-#define TS_SIGNATURE "rusEFI 2023.01.18.atlas.snap_49663"
+#define SIGNATURE_HASH snap_16661
+#define TS_SIGNATURE "rusEFI 2023.01.20.atlas.snap_16661"
--- a/firmware/controllers/generated/signature_core8.h
+++ b/firmware/controllers/generated/signature_core8.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_25889
-#define TS_SIGNATURE "rusEFI 2023.01.18.core8.snap_25889"
+#define SIGNATURE_HASH snap_58827
+#define TS_SIGNATURE "rusEFI 2023.01.20.core8.snap_58827"
--- a/firmware/controllers/generated/signature_cypress.h
+++ b/firmware/controllers/generated/signature_cypress.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_13528
-#define TS_SIGNATURE "rusEFI 2023.01.18.cypress.snap_13528"
+#define SIGNATURE_HASH snap_46130
+#define TS_SIGNATURE "rusEFI 2023.01.20.cypress.snap_46130"
--- a/firmware/controllers/generated/signature_f407-discovery.h
+++ b/firmware/controllers/generated/signature_f407-discovery.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_13528
-#define TS_SIGNATURE "rusEFI 2023.01.18.f407-discovery.snap_13528"
+#define SIGNATURE_HASH snap_46130
+#define TS_SIGNATURE "rusEFI 2023.01.20.f407-discovery.snap_46130"
--- a/firmware/controllers/generated/signature_f429-discovery.h
+++ b/firmware/controllers/generated/signature_f429-discovery.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_13528
-#define TS_SIGNATURE "rusEFI 2023.01.18.f429-discovery.snap_13528"
+#define SIGNATURE_HASH snap_46130
+#define TS_SIGNATURE "rusEFI 2023.01.20.f429-discovery.snap_46130"
--- a/firmware/controllers/generated/signature_frankenso_na6.h
+++ b/firmware/controllers/generated/signature_frankenso_na6.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_51228
-#define TS_SIGNATURE "rusEFI 2023.01.18.frankenso_na6.snap_51228"
+#define SIGNATURE_HASH snap_18678
+#define TS_SIGNATURE "rusEFI 2023.01.20.frankenso_na6.snap_18678"
--- a/firmware/controllers/generated/signature_harley81.h
+++ b/firmware/controllers/generated/signature_harley81.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_29223
-#define TS_SIGNATURE "rusEFI 2023.01.18.harley81.snap_29223"
+#define SIGNATURE_HASH snap_62157
+#define TS_SIGNATURE "rusEFI 2023.01.20.harley81.snap_62157"
--- a/firmware/controllers/generated/signature_hellen-gm-e67.h
+++ b/firmware/controllers/generated/signature_hellen-gm-e67.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_22492
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen-gm-e67.snap_22492"
+#define SIGNATURE_HASH snap_55094
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen-gm-e67.snap_55094"
--- a/firmware/controllers/generated/signature_hellen-nb1.h
+++ b/firmware/controllers/generated/signature_hellen-nb1.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_1300
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen-nb1.snap_1300"
+#define SIGNATURE_HASH snap_34302
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen-nb1.snap_34302"
--- a/firmware/controllers/generated/signature_hellen121nissan.h
+++ b/firmware/controllers/generated/signature_hellen121nissan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_51530
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen121nissan.snap_51530"
+#define SIGNATURE_HASH snap_18848
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen121nissan.snap_18848"
--- a/firmware/controllers/generated/signature_hellen121vag.h
+++ b/firmware/controllers/generated/signature_hellen121vag.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_41925
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen121vag.snap_41925"
+#define SIGNATURE_HASH snap_9007
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen121vag.snap_9007"
--- a/firmware/controllers/generated/signature_hellen128.h
+++ b/firmware/controllers/generated/signature_hellen128.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_18915
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen128.snap_18915"
+#define SIGNATURE_HASH snap_51465
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen128.snap_51465"
--- a/firmware/controllers/generated/signature_hellen154hyundai.h
+++ b/firmware/controllers/generated/signature_hellen154hyundai.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_3643
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen154hyundai.snap_3643"
+#define SIGNATURE_HASH snap_36561
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen154hyundai.snap_36561"
--- a/firmware/controllers/generated/signature_hellen72.h
+++ b/firmware/controllers/generated/signature_hellen72.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_14931
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen72.snap_14931"
+#define SIGNATURE_HASH snap_47801
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen72.snap_47801"
--- a/firmware/controllers/generated/signature_hellen81.h
+++ b/firmware/controllers/generated/signature_hellen81.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_43685
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen81.snap_43685"
+#define SIGNATURE_HASH snap_10831
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen81.snap_10831"
--- a/firmware/controllers/generated/signature_hellen88bmw.h
+++ b/firmware/controllers/generated/signature_hellen88bmw.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_10004
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellen88bmw.snap_10004"
+#define SIGNATURE_HASH snap_43006
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellen88bmw.snap_43006"
--- a/firmware/controllers/generated/signature_hellenNA6.h
+++ b/firmware/controllers/generated/signature_hellenNA6.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_34287
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellenNA6.snap_34287"
+#define SIGNATURE_HASH snap_1285
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellenNA6.snap_1285"
--- a/firmware/controllers/generated/signature_hellenNA8_96.h
+++ b/firmware/controllers/generated/signature_hellenNA8_96.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_34096
-#define TS_SIGNATURE "rusEFI 2023.01.18.hellenNA8_96.snap_34096"
+#define SIGNATURE_HASH snap_1498
+#define TS_SIGNATURE "rusEFI 2023.01.20.hellenNA8_96.snap_1498"
--- a/firmware/controllers/generated/signature_kin.h
+++ b/firmware/controllers/generated/signature_kin.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_38420
-#define TS_SIGNATURE "rusEFI 2023.01.18.kin.snap_38420"
+#define SIGNATURE_HASH snap_5886
+#define TS_SIGNATURE "rusEFI 2023.01.20.kin.snap_5886"
--- a/firmware/controllers/generated/signature_m74_9.h
+++ b/firmware/controllers/generated/signature_m74_9.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_59875
-#define TS_SIGNATURE "rusEFI 2023.01.18.m74_9.snap_59875"
+#define SIGNATURE_HASH snap_26889
+#define TS_SIGNATURE "rusEFI 2023.01.20.m74_9.snap_26889"
--- a/firmware/controllers/generated/signature_mre_f4.h
+++ b/firmware/controllers/generated/signature_mre_f4.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_21464
-#define TS_SIGNATURE "rusEFI 2023.01.18.mre_f4.snap_21464"
+#define SIGNATURE_HASH snap_54066
+#define TS_SIGNATURE "rusEFI 2023.01.20.mre_f4.snap_54066"
--- a/firmware/controllers/generated/signature_mre_f7.h
+++ b/firmware/controllers/generated/signature_mre_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_21464
-#define TS_SIGNATURE "rusEFI 2023.01.18.mre_f7.snap_21464"
+#define SIGNATURE_HASH snap_54066
+#define TS_SIGNATURE "rusEFI 2023.01.20.mre_f7.snap_54066"
--- a/firmware/controllers/generated/signature_prometheus_405.h
+++ b/firmware/controllers/generated/signature_prometheus_405.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_60734
-#define TS_SIGNATURE "rusEFI 2023.01.18.prometheus_405.snap_60734"
+#define SIGNATURE_HASH snap_28116
+#define TS_SIGNATURE "rusEFI 2023.01.20.prometheus_405.snap_28116"
--- a/firmware/controllers/generated/signature_prometheus_469.h
+++ b/firmware/controllers/generated/signature_prometheus_469.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_60734
-#define TS_SIGNATURE "rusEFI 2023.01.18.prometheus_469.snap_60734"
+#define SIGNATURE_HASH snap_28116
+#define TS_SIGNATURE "rusEFI 2023.01.20.prometheus_469.snap_28116"
--- a/firmware/controllers/generated/signature_proteus_f4.h
+++ b/firmware/controllers/generated/signature_proteus_f4.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_65384
-#define TS_SIGNATURE "rusEFI 2023.01.18.proteus_f4.snap_65384"
+#define SIGNATURE_HASH snap_32642
+#define TS_SIGNATURE "rusEFI 2023.01.20.proteus_f4.snap_32642"
--- a/firmware/controllers/generated/signature_proteus_f7.h
+++ b/firmware/controllers/generated/signature_proteus_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_65384
-#define TS_SIGNATURE "rusEFI 2023.01.18.proteus_f7.snap_65384"
+#define SIGNATURE_HASH snap_32642
+#define TS_SIGNATURE "rusEFI 2023.01.20.proteus_f7.snap_32642"
--- a/firmware/controllers/generated/signature_proteus_h7.h
+++ b/firmware/controllers/generated/signature_proteus_h7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_65384
-#define TS_SIGNATURE "rusEFI 2023.01.18.proteus_h7.snap_65384"
+#define SIGNATURE_HASH snap_32642
+#define TS_SIGNATURE "rusEFI 2023.01.20.proteus_h7.snap_32642"
--- a/firmware/controllers/generated/signature_s105.h
+++ b/firmware/controllers/generated/signature_s105.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_38687
-#define TS_SIGNATURE "rusEFI 2023.01.18.s105.snap_38687"
+#define SIGNATURE_HASH snap_6133
+#define TS_SIGNATURE "rusEFI 2023.01.20.s105.snap_6133"
--- a/firmware/controllers/generated/signature_subaru_eg33_f7.h
+++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_60674
-#define TS_SIGNATURE "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674"
+#define SIGNATURE_HASH snap_28136
+#define TS_SIGNATURE "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136"
--- a/firmware/controllers/generated/signature_tdg-pdm8.h
+++ b/firmware/controllers/generated/signature_tdg-pdm8.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH snap_64140
-#define TS_SIGNATURE "rusEFI 2023.01.18.tdg-pdm8.snap_64140"
+#define SIGNATURE_HASH snap_31334
+#define TS_SIGNATURE "rusEFI 2023.01.20.tdg-pdm8.snap_31334"
--- a/firmware/tunerstudio/generated/rusefi.ini
+++ b/firmware/tunerstudio/generated/rusefi.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.all.snap_13528"
+	signature	= "rusEFI 2023.01.20.all.snap_46130"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.all.snap_13528" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.all.snap_46130" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:21 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:22 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_48way.ini
+++ b/firmware/tunerstudio/generated/rusefi_48way.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.48way.snap_15511"
+	signature	= "rusEFI 2023.01.20.48way.snap_48253"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.48way.snap_15511" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.48way.snap_48253" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:01 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:06 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.alphax-2chan.snap_43444"
+	signature	= "rusEFI 2023.01.20.alphax-2chan.snap_10590"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.alphax-2chan.snap_43444" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.alphax-2chan.snap_10590" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:32 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:42 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.alphax-4chan.snap_9713"
+	signature	= "rusEFI 2023.01.20.alphax-4chan.snap_42267"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.alphax-4chan.snap_9713" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.alphax-4chan.snap_42267" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:33 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:43 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.alphax-8chan.snap_43860"
+	signature	= "rusEFI 2023.01.20.alphax-8chan.snap_11198"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.alphax-8chan.snap_43860" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.alphax-8chan.snap_11198" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:35 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:44 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_atlas.ini
+++ b/firmware/tunerstudio/generated/rusefi_atlas.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.atlas.snap_49663"
+	signature	= "rusEFI 2023.01.20.atlas.snap_16661"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.atlas.snap_49663" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.atlas.snap_16661" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:18 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:20 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_core8.ini
+++ b/firmware/tunerstudio/generated/rusefi_core8.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.core8.snap_25889"
+	signature	= "rusEFI 2023.01.20.core8.snap_58827"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.core8.snap_25889" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.core8.snap_58827" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:59 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:05 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_cypress.ini
+++ b/firmware/tunerstudio/generated/rusefi_cypress.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.cypress.snap_13528"
+	signature	= "rusEFI 2023.01.20.cypress.snap_46130"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.cypress.snap_13528" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.cypress.snap_46130" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed Jan 18 04:14:29 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Jan 20 01:50:40 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini
+++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.f407-discovery.snap_13528"
+	signature	= "rusEFI 2023.01.20.f407-discovery.snap_46130"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.f407-discovery.snap_13528" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.f407-discovery.snap_46130" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:15 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:17 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini
+++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.f429-discovery.snap_13528"
+	signature	= "rusEFI 2023.01.20.f429-discovery.snap_46130"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.f429-discovery.snap_13528" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.f429-discovery.snap_46130" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:16 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:18 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
+++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.frankenso_na6.snap_51228"
+	signature	= "rusEFI 2023.01.20.frankenso_na6.snap_18678"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.frankenso_na6.snap_51228" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.frankenso_na6.snap_18678" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:05 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:10 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_harley81.ini
+++ b/firmware/tunerstudio/generated/rusefi_harley81.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.harley81.snap_29223"
+	signature	= "rusEFI 2023.01.20.harley81.snap_62157"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.harley81.snap_29223" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.harley81.snap_62157" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:36 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:46 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen-gm-e67.snap_22492"
+	signature	= "rusEFI 2023.01.20.hellen-gm-e67.snap_55094"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen-gm-e67.snap_22492" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen-gm-e67.snap_55094" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:51 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:57 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen-nb1.snap_1300"
+	signature	= "rusEFI 2023.01.20.hellen-nb1.snap_34302"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen-nb1.snap_1300" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen-nb1.snap_34302" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:49 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:56 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen121nissan.snap_51530"
+	signature	= "rusEFI 2023.01.20.hellen121nissan.snap_18848"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen121nissan.snap_51530" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen121nissan.snap_18848" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:41 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:50 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen121vag.snap_41925"
+	signature	= "rusEFI 2023.01.20.hellen121vag.snap_9007"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen121vag.snap_41925" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen121vag.snap_9007" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:40 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:48 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen128.snap_18915"
+	signature	= "rusEFI 2023.01.20.hellen128.snap_51465"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen128.snap_18915" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen128.snap_51465" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:38 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:47 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen154hyundai.snap_3643"
+	signature	= "rusEFI 2023.01.20.hellen154hyundai.snap_36561"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen154hyundai.snap_3643" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen154hyundai.snap_36561" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:43 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:51 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen72.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen72.snap_14931"
+	signature	= "rusEFI 2023.01.20.hellen72.snap_47801"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen72.snap_14931" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen72.snap_47801" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:46 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:54 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen81.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen81.snap_43685"
+	signature	= "rusEFI 2023.01.20.hellen81.snap_10831"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen81.snap_43685" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen81.snap_10831" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:48 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:55 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellen88bmw.snap_10004"
+	signature	= "rusEFI 2023.01.20.hellen88bmw.snap_43006"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellen88bmw.snap_10004" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellen88bmw.snap_43006" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:44 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:52 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellenNA6.snap_34287"
+	signature	= "rusEFI 2023.01.20.hellenNA6.snap_1285"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellenNA6.snap_34287" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellenNA6.snap_1285" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:52 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:59 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.hellenNA8_96.snap_34096"
+	signature	= "rusEFI 2023.01.20.hellenNA8_96.snap_1498"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.hellenNA8_96.snap_34096" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.hellenNA8_96.snap_1498" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:54 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:01 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_kin.ini
+++ b/firmware/tunerstudio/generated/rusefi_kin.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.kin.snap_38420"
+	signature	= "rusEFI 2023.01.20.kin.snap_5886"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.kin.snap_38420" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.kin.snap_5886" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed Jan 18 04:14:28 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Jan 20 01:50:39 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_m74_9.ini
+++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.m74_9.snap_59875"
+	signature	= "rusEFI 2023.01.20.m74_9.snap_26889"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.m74_9.snap_59875" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.m74_9.snap_26889" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:02 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:07 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini
+++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.mre_f4.snap_21464"
+	signature	= "rusEFI 2023.01.20.mre_f4.snap_54066"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.mre_f4.snap_21464" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.mre_f4.snap_54066" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:57 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:03 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.mre_f7.snap_21464"
+	signature	= "rusEFI 2023.01.20.mre_f7.snap_54066"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.mre_f7.snap_21464" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.mre_f7.snap_54066" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:56 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:02 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini
+++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.prometheus_405.snap_60734"
+	signature	= "rusEFI 2023.01.20.prometheus_405.snap_28116"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.prometheus_405.snap_60734" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.prometheus_405.snap_28116" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:08 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:12 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini
+++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.prometheus_469.snap_60734"
+	signature	= "rusEFI 2023.01.20.prometheus_469.snap_28116"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.prometheus_469.snap_60734" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.prometheus_469.snap_28116" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:07 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:11 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.proteus_f4.snap_65384"
+	signature	= "rusEFI 2023.01.20.proteus_f4.snap_32642"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.proteus_f4.snap_65384" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.proteus_f4.snap_32642" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:12 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:15 UTC 2023

 pageSize            = 26368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.proteus_f7.snap_65384"
+	signature	= "rusEFI 2023.01.20.proteus_f7.snap_32642"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.proteus_f7.snap_65384" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.proteus_f7.snap_32642" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:10 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:13 UTC 2023

 pageSize            = 26368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.proteus_h7.snap_65384"
+	signature	= "rusEFI 2023.01.20.proteus_h7.snap_32642"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.proteus_h7.snap_65384" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.proteus_h7.snap_32642" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:13 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:16 UTC 2023

 pageSize            = 26368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_s105.ini
+++ b/firmware/tunerstudio/generated/rusefi_s105.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.s105.snap_38687"
+	signature	= "rusEFI 2023.01.20.s105.snap_6133"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.s105.snap_38687" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.s105.snap_6133" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:04 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:08 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674"
+	signature	= "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:30 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:41 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini
+++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini
@ -33,12 +33,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI 2023.01.18.tdg-pdm8.snap_64140"
+	signature	= "rusEFI 2023.01.20.tdg-pdm8.snap_31334"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI 2023.01.18.tdg-pdm8.snap_64140" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI 2023.01.20.tdg-pdm8.snap_31334" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -86,7 +86,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:19 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:21 UTC 2023

 pageSize            = 22368
 page = 1
@ -4089,6 +4089,11 @@ gaugeCategory = VVT
 	vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
 	vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0
+	vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0
+	vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0
+

 gaugeCategory = Ignition
 	sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
--- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
+++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
@ -1,6 +1,6 @@
 package com.rusefi.config.generated;

-// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:24 UTC 2023
+// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:23 UTC 2023

 // by class com.rusefi.output.FileJavaFieldsConsumer
 import com.rusefi.config.*;
@ -1202,7 +1202,7 @@ public class Fields {
 	public static final int TS_RESPONSE_UNDERRUN = 0x80;
 	public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
 	public static final char TS_SET_LOGGER_SWITCH = 'l';
-	public static final String TS_SIGNATURE = "rusEFI 2023.01.18.all.snap_13528";
+	public static final String TS_SIGNATURE = "rusEFI 2023.01.20.all.snap_46130";
 	public static final char TS_SINGLE_WRITE_COMMAND = 'W';
 	public static final char TS_TEST_COMMAND = 't';
 	public static final int TS_TOTAL_OUTPUT_SIZE = 1300;