Matthew Kennedy
4665e67eb4
pass board dir to scripts instead of board name ( #5022 )
...
* pass board dir instead of name
* makefiles
* dead file?
* hw ci
* unit tests
* fix sd card generation while we're here
* actually test sd category
* jar
* clean merge
* jar for good measure
* fix f767 properly
2023-02-06 08:37:17 -04:00
Matthew Kennedy
12db2221e6
make nucleo builds normal ( #5035 )
...
* make nucleo builds normal
* no skip for test
* don't check for `no`
* put back skips
2023-02-05 20:56:13 -04:00
rusefillc
ed8910bb32
build-firmware (stm32f767_nucleo) build is broken #5033
2023-02-04 13:14:42 -05:00
Matthew Kennedy
73f4436397
deduplicate $(BOARD_DIR) in makefiles ( #5024 )
...
* calculate BOARD_DIR exactly once
* deduplicate board scripts
* unit tests
* make passes variables to openblt build properly
* was this an intentional omission?
* s
* prometheus
* prometheus
2023-02-01 14:41:27 -05:00
Matthew Kennedy
6e3efed09c
more f429 business ( #4679 )
...
* 429 boots and LEDs work
* oops missed a comma
* enable on f767 too, since it should be the same board
* why not just completely duplicate it
* script should not be fancy
* script should not be fancy
* correct pins
* h743 while we're at it
2022-10-20 00:59:39 -04:00
Andrey
c7b1333795
Enable ethernet on one or both nucleo boards #4665
2022-10-16 22:36:31 -04:00
rusefillc
ba5a99d300
+x is fun
2022-10-16 22:11:06 -04:00
rusefillc
57c804c6f5
there is no third trigger simulator channel right?
2022-10-03 00:18:11 -04:00
rusefillc
25cc8ed0df
STM32_HSE_BYPASS where we need it ( #4338 )
...
Co-authored-by: rusefillc <sdfsdfqsf2334234234>
2022-07-11 04:30:49 -04:00
Matthew Kennedy
b92c0149d6
get rid of setSerialConfigurationOverrides ( #4274 )
...
* get rid of setSerialConfigurationOverrides
* missed a few
* kinetis
2022-06-23 19:42:09 -04:00
Matthew Kennedy
4d7fe35c5c
clean up sd overrides ( #4272 )
2022-06-23 09:15:51 -04:00
Matthew Kennedy
e4a0979dc2
Brain pin is enum class ( #4108 )
...
* change most usages to Gpio::
* board configs
* engine configs etc
* isBrainPinValid, smart gpio
* generator
* generator
* generator
* connector yamls
* kinetis enums
* cypress txt
* kinetis config
* frankenso
* config generator
* actually do it for the others
* disable skips for pr ci
* fix tle8888
* misc
* weird cast from int
* needs this operator too
* this can be an unsigned subtract
* happy tests
* s
* kinetis isConfigurationChanged weirdness
* missed J/K
* cypress efifeatures
* build script mistake (!)
* mistake in smart gpio
* debounce
* eg33
* kinetis, so needy
* it's pretty green, we can skip these again
2022-04-28 17:32:39 -04:00
Matthew Kennedy
68eb210a57
pass parameters instead of `export` in build scripts ( #4081 )
...
* no `export ...` mess
* frankenso NA6
2022-04-18 19:05:27 -04:00
rusefillc
8f17fdc502
better default DEFAULT_ENGINE_TYPE
2022-02-09 19:55:04 -05:00
Matthew Kennedy
f1897ba7aa
less dependence on that logger ( #3884 )
...
* less dependence on that logger
* comma
* refactor a bit, make it clear what this thing actually *does*
* static
* shrink the buffer a bit and make names useful
* dead util that's just subtraction lol
2022-02-09 06:53:16 -05:00
Matthew Kennedy
a718f3a30a
Remove fsio part 1 ( #3871 )
...
* dead includes
* move last logic out of fsio
* dead functions
2022-02-01 15:42:04 -05:00
rusefillc
6ca6c53786
refactoring?
2022-01-14 22:45:49 -05:00
rusefillc
963c168788
Code style for methods with zero arguments #3535
2022-01-11 22:26:24 -05:00
rusefillc
e2a9acac23
reducing copy-pasta - would this work?
2022-01-04 20:03:41 -05:00
rusefillc
c411029383
reducing copy-pasta - would this work?
2022-01-04 19:08:37 -05:00
Matthew Kennedy
25414ebdad
yet more pch ( #3068 )
...
* big pch energy
* put back ramdisk stub
* tests are happy
* h743 nucleo
* kinetis
* I love deleting code!
* make stepper happy
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-08-03 22:05:01 -04:00
Matthew Kennedy
2ce7777865
don't require EXTERN_ENGINE in every file ( #2969 )
...
* move enginePins
* no more extern engine
* uses
* more
* extern config too
* put this where it belongs
* include correct header
* merge
2021-07-16 18:13:33 -04:00
Matthew Kennedy
51a5b4d6d5
rename setBoardConfigurationOverrides ( #2479 )
...
* rename
* proteus
* comments
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-22 14:15:09 -04:00
Matthew Kennedy
b087f328f7
default config, UI tweaks ( #2444 )
...
* s
* fix this while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-12 00:16:24 -05:00
Matthew Kennedy
59eecab421
prep proteus config for h7 ( #2413 )
...
* prep for h7
* weak link that
* make those weak
* remove other stubs
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-28 16:57:57 -05:00
Matthew Kennedy
dade25ef34
move chconf/mcuconf/halconf in to hw_ports ( #2321 )
...
* move f4 config files
* don't need this
* f7
* f7
* h7
* this was duplicated
* turn off smart build
* loader too
* update prometheus paths
* bootloader should include confdir
* fix the flash size while we're at it
* move chconf_common
* use wait
* normalize board.mk
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-10 19:38:24 -05:00
Matthew Kennedy
3debd2229b
move board.h for f7/h7 ( #2316 )
...
* f7 board.h
* h7
2021-02-08 15:46:48 -05:00
Matthew Kennedy
b995e7bcaa
include board.c from hw_ports.mk ( #2311 )
...
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* move board.c
* set explicit cpu type for simulator
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-08 07:52:31 -06:00
Matthew Kennedy
423acd384b
simplify MCU selection ( #2308 )
...
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
2021-02-08 02:11:44 -05:00
rusefillc
08931afb07
that's a bit useless?
2021-02-05 20:14:52 -05:00
Andrey G
777979c3ca
Chibi os 20 ( #2212 )
...
* Update ChibiOS
* Fix Makefiles includes paths
* halconf.h: remove flash hack
* mcuconf: fix EXTI ptiorityes
* Digital Input: ICU: use designated initializers, initialize 'arr'
* ChibiOS: lis302dl fix
* ADC: update to new API
* UARTConfig: timeout_cb field, formating
* ChibiOS: remove _exit, _kill, _getpid
* Fix lis302dl
* Bump config versions
* chconfig_common: cosmetic changes
* stm32f4ems: commulative config update
* Update Simulator
* ALLCSRC already contain all needed ChibiOS files.
Same for ALLINC and ALLCPPSRC
* ChibiOS fix for Simulator
* ChibiOS: port lock/unlock hook and MMC over SPI timeout
* STM32F7: update configs
* STM32F7: update linker file
* Cypress: port ADC lld to ChibiOS-20
* Cypress: port SPI lld to ChibiOS-20
* Cypress: port CAN lld to ChibiOS-20
* Cypress: fix include path for rules.ld
* Cypress: update chconf.h and halconf.h for ChibiOS-20
* Kinetis: update ADC lld to ChibiOS-20
* Kinetis: update SPI lld to ChibiOS-20
* Kinetis: update UART lld driver for ChibiOS-20
* Kinetis: update chconf.h and halconf.h for ChibiOS-20
* Kinetis: fix include path for rules.ld
* Nucleo F746: update ld script
* Nucleo F746: fix compile
* Bootloader: fix compilation with ChibiOS-20, cleanup
* Bootloader: add way to pass crosscompiler using CROSS_COMPILE
* Debug build arguments
* Simulator: fix windows compilation
Exclude syscalls_cpp.cpp from compilation
2021-01-19 15:20:35 -05:00
Andrey G
baea67eccf
Simplify Makefile, unify board.mk files ( #2229 )
...
* Proper way to add lis302 driver
* Proper way to add license directory to includes
* Makefile: simplify
All ChibiOS stuff is accumulated in ALLCSRC, ALLINC and so on.
* board.mk: append sources and includes to ALLSRC, ALLCPPSRC, ALLINC
* Cypress: fix CANv2 includence into build
2021-01-17 09:32:06 -05:00
David Holdeman
ae9c60731a
move cd statements to common_make.sh ( #1830 )
...
* move cd to compile.sh
* rel path
* undo changes to compile.sh and move cd to common_make
2020-09-28 18:25:15 -04:00
Matthew Kennedy
d2d0ffa1ee
remove tach output pin ( #1779 )
...
* remove from cfg
* cfg
* rip out impl
* efi gpio
2020-09-09 16:52:23 -04:00
David Holdeman
779029caed
Switch to Bash ( #1585 )
...
* switch firmware to bash
* switch unit_testts to bash
* switch jenkins to bash
2020-07-09 10:27:20 -04:00
David Holdeman
b4807708c8
Convert jenkins build_extra_bundles scripts to sh ( #1554 )
...
* Add checkout
* remove empty with statement
* Actually we do need push depth
* convert build_working_folder
* convert prepare_bundle
* fixed extension
* fixed closing bracket
* fixed comparison and assignments
* no comment
* convert compile_and_upload and clean
* convert build_simulator
* Finish converting build_working_folder
* convert build_java_console
* Add hashbangs
* remove findcyg instruction
* changed paths
* remove call
* add path
* fixed script names
* add prams
* fix cd
* convert clean_env_variables
* convert common_make.sh
* Added linux hex2dfu binary
* add file extension to linux hex2dfu
* add file extension to linux hex2dfu
* remove spurious paren
* fixed board name
* convert compile-frankenso-na6
* convert compile-frankenso-pal
* add hashbang
* convert compile-kinetis
* convert compile-mre-f4
* convert compile-mre-f4-hardware-QC-special-build
* convert compile-mre-f4-slave
* convert compile-mre-f7
* convert compile-mre-f7-test
* switch to underscores
* converting boards to sh
* convert prometheus
* convert proteus
* fixed path
* switch to underscores
* chmod and add extension
* add quotes
* Add check for Windows
* Add chmod
* fix script name
* fix error checking
* quote vars
* remove checking from batch shims
* fix typo
* change error checking to support nix style error codes
* switch to 1 retval
* cd back to firmware
* Add escapes
* change from cd to rel path
* add p flags to mkdir
Co-authored-by: David Holdeman <David Holdeman>
2020-07-01 14:09:01 -04:00
Matthew Kennedy
0c142921d6
don't register ID pin ( #1438 )
2020-05-16 00:33:47 -04:00
rusefi
a955e96b62
RED FATAL/CRITICAL LED is a bit dim when it should be OFF
...
fix https://github.com/rusefi/hw_microRusEfi/issues/157
2020-05-11 18:35:28 -04:00
rusefi
7e82691319
oh what did I do
2020-05-02 22:27:20 -04:00
rusefi
2a70659a28
wow maybe build time magic?! by DronoGus
2020-04-25 12:07:57 -04:00
rusefi
afa185f3bd
i just want to build
2020-04-20 09:10:18 -04:00
Matthew Kennedy
9f27f95d14
ignore vbus ( #1175 )
2020-03-07 15:53:38 -05:00
rusefi
af4f20551b
getting rid of boardConfiguration / binary compatible change
2019-12-11 17:48:55 -05:00
rusefi
6481662092
reducing code duplication & including kinetis
2019-12-04 07:50:46 -05:00
Matthew Kennedy
3f0385f70d
Remove chibios trace flag ( #1037 )
...
* remove from scripts
* remove from others
2019-12-02 19:11:07 -05:00
rusefi
b04166d173
that's how we can move all fields one by one from boardConfiguration to engineConfiguration
...
my approach is to move fields from the bottom of BC struct
2019-11-30 10:24:37 -05:00
rusEfi
67c25a6f12
A/C relay cleanup
2019-09-15 11:32:38 -04:00
rusefi
fd7353ee26
default pinout nightmare
2019-08-07 00:36:54 -04:00
rusefi
91f9a50b3f
F7 nucleo does not work?
...
funny, it was about some very unused feature
2019-08-02 01:36:02 -04:00
rusefi
5486705f8e
F7 bundles rusEfi console should erase and program using F7 configs #893
2019-07-29 21:07:04 -04:00