rusefillc ddf1c28d57 open loop boost control does not allow Y axis MAP values greater than 100, even when Y axis is set to MAP #6840 ... expanding range, also renaming axis		2024-08-22 11:34:34 -04:00
..
actuators	open loop boost control does not allow Y axis MAP values greater than 100, even when Y axis is set to MAP #6840	2024-08-22 11:34:34 -04:00
algo	remove mapAveragingSchedulingAtIndex	2024-08-21 08:22:49 -04:00
can	slow down verbose CAN while in serial CAN but do not stop it	2024-08-18 01:25:50 -04:00
core	revive MC33816 driver #6781	2024-08-08 11:33:39 -04:00
engine_cycle	remove mapAveragingSchedulingAtIndex	2024-08-21 08:22:49 -04:00
gauges	…
generated	Auto-generated configs and docs	2024-08-22 00:28:48 +00:00
lua	Auto-generated configs and docs	2024-08-21 12:32:35 +00:00
math	cisnan -> std::isnan	2024-07-22 21:10:06 -04:00
sensors	extracting magic constant	2024-08-18 01:19:59 -04:00
serial	…
system	name VVT PWMs	2024-08-14 11:53:10 -04:00
tcu	…
trigger	rusefi allows selecting inactive cam signal for engine sync resolution #6830	2024-08-22 00:09:18 -04:00
bench_test.cpp	only:dead code?	2024-08-13 20:39:45 -04:00
bench_test.h	…
closed_loop_controller.h	…
controllers.mk	Now we use `A/C Pressure Enable Hysteresis` instead of deadband #6804	2024-08-21 15:52:46 -04:00
date_stamp.h	Update date	2024-08-22 00:39:41 +00:00
engine_controller.cpp	open loop boost control does not allow Y axis MAP values greater than 100, even when Y axis is set to MAP #6840	2024-08-22 11:34:34 -04:00
engine_controller.h	getPinNameByAdcChannel: be more safe	2024-07-20 17:37:52 -04:00
engine_controller_misc.cpp	…
flash_main.cpp	flash_main: fix STM32F7 2Mb single bank never write pending settings	2024-08-09 18:25:31 -04:00
flash_main.h	…
global_shared.h	…
ignition_controller.cpp	…
ignition_controller.h	…
limp_manager.cpp	oil pressure protection (while running) #6780	2024-08-08 11:13:14 -04:00
limp_manager.h	Now we use `A/C Pressure Enable Hysteresis` instead of deadband #6804	2024-08-21 15:52:46 -04:00
max_limit_with_hysteresis.cpp	Now we use `A/C Pressure Enable Hysteresis` instead of deadband #6804	2024-08-21 15:52:46 -04:00
max_limit_with_hysteresis.h	Now we use `A/C Pressure Enable Hysteresis` instead of deadband #6804	2024-08-21 15:52:46 -04:00
persistent_store.cpp	…
settings.cpp	only:dead code?	2024-08-13 20:39:45 -04:00
settings.h	…
shutdown_controller.cpp	…
shutdown_controller.h	…
start_stop.cpp	…
start_stop.h	…
thread_priority.h	…