42 lines
1.3 KiB
C
42 lines
1.3 KiB
C
//DO NOT EDIT MANUALLY, let automation work hard.
|
|
|
|
// auto-generated by PinoutLogic.java based on config/boards/m74_9/connectors/m74_9.yaml
|
|
#pragma once
|
|
|
|
Gpio GENERATED_OUTPUTS = {
|
|
Gpio::L9779_OUT_4, // Injector 1
|
|
Gpio::L9779_OUT_3, // Injector 2
|
|
Gpio::L9779_OUT_2, // Injector 3
|
|
Gpio::L9779_OUT_1, // Injector 4
|
|
Gpio::L9779_OUT_6, // Oxygen sensor 1 heater
|
|
Gpio::L9779_OUT_5, // EVAP solenoid control
|
|
Gpio::L9779_OUT_7, // Oxygen sensor 2 heater
|
|
Gpio::L9779_IGN_1, // Coil 1 (< +2.5v) / Coils 1,4
|
|
Gpio::L9779_IGN_3, // Coil 3 (< +2.5v) / Coils 2,4
|
|
Gpio::L9779_IGN_2, // Coil 2 (< +2.5v) (not populated)
|
|
Gpio::L9779_IGN_4, // Coil 4 (< +2.5v) (not populated)
|
|
Gpio::L9779_OUT_17, // Air compressor control
|
|
Gpio::L9779_OUT_14, // Secondary starter relay
|
|
Gpio::L9779_OUT_15, // FAN 1 relay
|
|
Gpio::L9779_OUT_16, // FAN 2 relay
|
|
Gpio::L9779_OUT_18, // Unknown out (OUT18)
|
|
Gpio::L9779_OUT_13, // Fuel pump relay
|
|
// "Injector 1",
|
|
// "Injector 2",
|
|
// "Injector 3",
|
|
// "Injector 4",
|
|
// "Oxygen sensor 1 heater",
|
|
// "EVAP solenoid control",
|
|
// "Oxygen sensor 2 heater",
|
|
// "Coil 1 (< +2.5v) / Coils 1,4",
|
|
// "Coil 3 (< +2.5v) / Coils 2,4",
|
|
// "Coil 2 (< +2.5v) (not populated)",
|
|
// "Coil 4 (< +2.5v) (not populated)",
|
|
// "Air compressor control",
|
|
// "Secondary starter relay",
|
|
// "FAN 1 relay",
|
|
// "FAN 2 relay",
|
|
// "Unknown out (OUT18)",
|
|
// "Fuel pump relay",
|
|
}
|