f3d8628c5e
Don't consume trailing char in parseInt() and parseFloat (Paul Stoffregen).
...
http://code.google.com/p/arduino/issues/detail?id=624
2011-09-09 16:24:47 -04:00
6f65578b99
updated Leonardo INF with correct PID and created new Micro INF.
2011-09-08 20:45:10 -04:00
b1c8d0be34
in bootloader reduced delay between receiving stk500 'Q' and jumping to application
2011-09-08 20:38:23 -04:00
94879d3ac6
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
...
Conflicts:
build/linux/dist/tools/avrdude.conf
2011-09-08 20:26:47 -04:00
db7013f95c
fixed bug where sketches over 28k caused subsequent auto-reset-and-upload attempts to fail. fixed bug in reboot routine, changed fuses to select 1024-word bootloader size, disabled hardware boot enable.
2011-09-08 19:31:18 -04:00
c0b45364b8
disabling watchdog in bootloader
2011-09-08 18:12:11 -04:00
11e3921c81
misc. bootloader fixes: increased wait time after receiving avrdude 'Q', increased bootloader timeout, and fixed LED one-shot timing
2011-09-08 16:23:29 -04:00
e870f070db
added compile-time definition of sketch PID. PID is pulled from variants/leonardo or the new variants/micro as appropriate.
2011-09-08 15:52:05 -04:00
508eb9b72f
removed leftover pins/ directory
2011-09-08 15:43:16 -04:00
301f1b8552
Revert "added Micro section to boards.txt. specified different bootloader hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt"
...
This reverts commit 3b5122e138
2011-09-08 15:40:41 -04:00
c295917fad
Revert "support compile-time passing of PID to Leonardo/Micro sketches. PID comes from boards.txt - different for Micro and Leonardo"
...
This reverts commit 3e0d195492
2011-09-08 15:39:17 -04:00
3e0d195492
support compile-time passing of PID to Leonardo/Micro sketches. PID comes from boards.txt - different for Micro and Leonardo
2011-09-08 11:23:55 -04:00
3b5122e138
added Micro section to boards.txt. specified different bootloader hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt
2011-09-08 11:00:40 -04:00
48212b11fd
changed PIDs for Leonardo and Micro. PIDs are now defined in the Makefile
2011-09-08 09:47:17 -04:00
4db174e67b
removed all bootloader mass storage and MSC references
2011-09-08 09:12:30 -04:00
7d8d20894c
Making Print::write(char *) non-virtual.
...
http://code.google.com/p/arduino/issues/detail?id=607
2011-09-07 18:41:05 -04:00
ab36bd5dbb
Changing to a simpler mental model for serialEvent (Paul Stoffregen).
...
http://code.google.com/p/arduino/issues/detail?id=626
2011-09-07 17:47:17 -04:00
fa901e2ba4
changed auto-reset trigger condition to fix auto-reset-and-upload for Windows. now reboots when a port, opened at 1200 bps, is closed.
2011-09-06 20:58:00 -04:00
5e058a8aa3
changed baudrate for auto-reset-and-upload back to 1200 bps. specified arduino protocol for Leonardo avrdude upload.
2011-09-05 13:08:05 -04:00
e24e9499cf
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
...
Conflicts:
build/macosx/dist/tools-universal.zip
build/windows/avr_tools.zip
hardware/arduino/cores/arduino/HardwareSerial.cpp
2011-09-05 12:53:45 -04:00
83da177280
Merge branch 'new-extension' of github.com:arduino/Arduino into new-extension
2011-09-02 19:58:39 -04:00
85bf4252f0
Updating to avrdude 5.11 (Windows). stk500 -> arduino in boards.txt.
...
http://code.google.com/p/arduino/issues/detail?id=606
2011-09-02 19:57:29 -04:00
bf5e928e4c
Adding Arduino Ethernet and Arduino Mega ADK (joint w/ Mega 2560) to boards menu.
...
http://code.google.com/p/arduino/issues/detail?id=594
2011-08-31 16:48:06 -04:00
1278144d50
Moving serialEvent() calls from RX interrupts to main for() loop (after loop()).
...
http://code.google.com/p/arduino/issues/detail?id=584
2011-08-31 15:52:56 -04:00
61b33f11ce
Renaming writeError() to getWriteError() in Print (and Stream and friends).
...
http://code.google.com/p/arduino/issues/detail?id=608
2011-08-31 15:39:20 -04:00
3389d28e20
added Mouse press() and release()
2011-08-30 20:23:06 -04:00
7d26163b16
on a CDC or HID write() error, call setWriteError(). better handling of USB_Send errors in CDC.
2011-08-30 17:25:35 -04:00
a6093a8d91
Created an abstract base class UDP to match the Client and Server classes, and reworked the Ethernet library to use it and derive EthernetUDP.
2011-08-30 21:27:31 +01:00
6049e4455a
support for non-Leonardo boards is back!
2011-08-30 11:50:08 -04:00
0b3acaea21
CDC and HID write() routines now return non-void - brought in line with new write behavior
2011-08-30 11:04:34 -04:00
0a34c0f35e
brought leonardo folder in line with new variants scheme
2011-08-30 10:45:41 -04:00
91f89da73a
Merge branch 'mainline' into new-extension
2011-08-30 08:38:06 -04:00
ad5dead85a
Changed names of the Ethernet classes: Client -> EthernetClient, NetClient -> Client, and basic testing performed
2011-08-29 22:36:28 +01:00
b7533c1839
Final changes to integrate latest core updates to WiFly branch
2011-08-28 22:26:07 +01:00
e1748e79d7
Merge branch 'master' into wifly_integration
2011-08-28 20:28:53 +01:00
6345e2942a
auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to support 300 bps connection, changed core and boards.txt to match
2011-08-27 20:32:34 -04:00
4588120106
Merge branch 'new-extension' of https://github.com/arduino/Arduino
2011-08-27 23:53:42 +01:00
bef7d736d2
bootloader ends as soon as sketch upload finishes. restored pulsing of LED while bootloader running.
2011-08-27 07:00:07 -04:00
b73cf39d94
Moving write errors out of return value into separate API methods.
...
write(), print(), println() now return size_t (and don't use negative values to signal errors).
Print adds writeError() for checking for write errors, clearWriteError() to reset the flag to false, and a protected setWriteError() for signalling errors.
http://code.google.com/p/arduino/issues/detail?id=598
2011-08-26 16:08:14 -04:00
929597375b
Changing from long to ssize_t (int) for write(), print(), println() return.
2011-08-26 14:20:41 -04:00
eebe997dce
bugfix - Serial.write() would try to send even if no CDC connection was open.
2011-08-24 21:04:30 -04:00
ff5fe87864
changed auto-reset method for upload: now triggered by opening port at 1200 bps
2011-08-24 17:12:28 -04:00
8059abe581
write(), print(), and println() now return number of bytes written.
...
The type is long, and negative values indicate errors. Needs more testing.
http://code.google.com/p/arduino/issues/detail?id=551
2011-08-23 19:12:03 -04:00
b788ad593f
Distinguishing those boards with eight analog inputs (Fio, BT, Nano, Mini).
...
http://code.google.com/p/arduino/issues/detail?id=499
2011-08-23 17:29:20 -04:00
d00f0949ed
Renaming pins/ directory to the more generic variants/
...
http://code.google.com/p/arduino/issues/detail?id=588
2011-08-23 17:07:39 -04:00
dd539bacf8
USB microcontrollers will call USB.attach() after init(), before setup()
2011-08-18 19:59:35 -04:00
5b989d13b3
HW Serial on pins 0 and 1 works. Accessed by Serial1.* methods
2011-08-18 19:40:04 -04:00
4b0a87b405
Stream.readBytesUntil() now writes null terminator within length.
2011-08-18 15:13:47 -04:00
cb39ad9739
A few API changes to new Stream parsing functions.
...
Renamed readChars() -> readBytes(), readCharsUntil() -> readBytesUntil().
Changed timeouts to milliseconds from seconds; default from 5 to 1 seconds.
Removed readCharsBetween().
2011-08-17 14:16:47 -04:00
682b58e577
Integrating Stream searching & parsing (Michael Margolis)
...
This from Michael's TextFinder library, incorporated into the Stream class: find(), findUntil(), parseInt(), parseFloat(), readChars(), readCharsUntil(), readCharsBetween(), setTimeout().
2011-08-17 13:53:49 -04:00
e3848670a7
Temporary fix for auto-reset from IDE. Will reset chip when DTR is asserted, no matter what CDC baud rate is selected.
2011-08-16 13:43:55 -04:00
3f6df054ee
Serial via USB works
...
Integrated rest of Peter's USB implementation
2011-08-14 16:59:34 -04:00
e254d2989d
LEDs for D13, TX, and RX are more in line with Uno-like behavior during sketch uploading.
...
D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14 16:02:16 -04:00
c149be22f7
rebuilt Diskloader, added LED control macros for Leonardo, removed Microtouch defines
2011-08-14 15:11:23 -04:00
13a269df2e
increased bootloader delay to approx. 3.5 s
2011-08-14 14:29:44 -04:00
d338f22bde
Adding basic macros for analog + digital pin information.
...
http://code.google.com/p/arduino/issues/detail?id=495
2011-08-12 18:27:00 -04:00
f179794a45
Adding pin-change interrupt pin mapping macros to pins_arduino.h.
...
http://code.google.com/p/arduino/issues/detail?id=490
2011-08-12 17:31:22 -04:00
f14fd94d0e
Adding SCL, SDA, and LED #defines.
2011-08-12 16:59:24 -04:00
213091f487
cleaned up types. set D5 as not a PWM pin for now.
2011-08-11 14:16:13 -04:00
9b954df303
committed USB API, initial HardwareSerial-USBSerial integration
2011-08-11 14:08:38 -04:00
0ecdd723cf
diskloader source and binary for 32u4
2011-08-11 10:31:39 -04:00
cdf887b10b
support for 32u4 and Leonardo pins, uploading, and bootloader programming
2011-08-10 23:36:36 -04:00
c93fd746c4
Disabling terminal / monitor.
2011-06-29 22:48:07 -04:00
486e14aae3
Fixing linker command line argument.
2011-06-25 11:50:52 -04:00
7e1e9bfea2
Merge branch 'new-extension' into platforms
2011-06-25 11:40:12 -04:00
dacfa86223
Addtional debuggin. Trying to find the pins compile issue.
2011-06-22 21:20:45 -06:00
aa01546b55
Switched to a nonconflicting delimeter |. Compile process is working. Need to make sure that it matches 1.0 process exactly.
2011-06-17 22:12:21 -04:00
67c9dfc667
A bit of cleanup. Delimeter not figured out yet.
2011-06-17 00:54:58 -04:00
b0556c2e74
Changed :: to , for platforms.txt. Also, changes to compile process to support execAsynchronously changed to Stringp[]
2011-06-15 23:04:38 -04:00
c56a1293d7
Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
2011-06-14 23:57:41 -07:00
7b1ee0f1b0
Allow the READ PARAMETER command to return our version number.
...
(significant size impact: 14 bytes!)
Initialized "address" to eliminate compiler warning (4 bytes!)
Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)
Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328. The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted. Which should be less of a problem
now that the source is buildable without installing crosspack.
2011-06-14 10:24:27 -07:00
39a496616f
Modify Uno "lock" bits in boards.txt to make bootloader readable by
...
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
2011-06-14 01:13:41 -07:00
e81c1123b6
http://code.google.com/p/arduino/issues/detail?id=368
...
Optiboot does not support ArduinoasISP programmer.
When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed. Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch. This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested. Works! Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
2011-06-13 19:07:07 -07:00
8dfee1fb74
Merge remote branch 'upstream/new-extension'
...
Moved my fork to the Arduino 1.0 codebase
2011-06-11 21:27:18 +01:00
ece29c3805
(make sure .hex and .lst are updated as well.)
2011-06-11 03:17:38 -07:00
422398e08c
Fix errors in LDSECTIONS refactoring
...
(found during atmega8 testing.)
2011-06-11 03:15:33 -07:00
e28b716f88
Update version to reflect previous edit. Sigh.
2011-06-10 23:16:21 -07:00
6f7687b0f9
Shrink code by using registers for variables "length" and "address"
...
http://code.google.com/p/optiboot/issues/detail?id=33
Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38
Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
2011-06-10 23:02:25 -07:00
00706284de
Add a version number to the optiboot source and binary.
...
http://code.google.com/p/arduino/issues/detail?id=554
end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip. (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)
Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)
Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.
Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section. (This would
need to be done elsewhere as well to handle all bootloader programming
techniques. Notably Arduino's boards.txt
Note that this change does not change the "code" portion of optiboot
at all. The only diffs in the .hex files are the added version word
at the end of flash memory.
2011-06-10 17:47:47 -07:00
d4632cb095
Update shell script makeall
2011-06-10 16:29:34 -07:00
e2812ef91c
This is a relatively significant edit that brings the Arduino copy of
...
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)
This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h
These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
update optiboot to the point of the latest optiboot project sources.
These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
optiboot leaves timer1 configured when starting app, breaks PWM on
pin 9 and 10. (fixed with a workaround in arduino core.)
aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
Support for ATmega8 and mega88.
Fix fuse settings for mega168 _ISP targets
Additional new platforms (mega, sanguino)
http://code.google.com/p/optiboot/issues/detail?id=26
Set R1 to 0 (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
Fails to build correctly for mega88
After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
2011-06-10 16:17:13 -07:00
6840b77643
http://code.google.com/p/arduino/issues/detail?id=517
...
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.
This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
2011-06-09 22:57:27 -07:00
2d2ed324b4
Makefile modification to allow building optiboot in more environments.
...
Allows building within the Arduino Source tree, and within the Arduino
IDE tree, as well as using CrossPack on Mac.
Adds README.TXT to track arduino-specific changes (and documents the
new build options.)
This addresses Arduino issue:
http://code.google.com/p/arduino/issues/detail?id=487
And optiboot issue
http://code.google.com/p/optiboot/issues/detail?id=1
(which can be thought of as a subset of the Arduno issue.)
Note that the binaries produced after these Makefile changes (using any
of the compile environments) are identical to those produced by the
crosspack-20100115 environment on a Mac.
2011-06-09 22:36:05 -07:00
58de95a905
Added platforms.txt, and update boards.txt with platform=avr
2011-06-06 21:57:11 -04:00
87a04fc064
Added Printable interface class to allow printing of classes such as IPAddress
2011-06-04 09:19:17 -04:00
2711c9910b
Fixing 300 baud communication for serial.
...
Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow.
Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542
http://code.google.com/p/arduino/issues/detail?id=522
2011-05-20 13:29:13 -04:00
db64d2fc32
Fixing 300 baud communication for serial.
...
Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow.
Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542
http://code.google.com/p/arduino/issues/detail?id=522
2011-05-14 12:25:39 -04:00
8c0fdf1e43
Small optimization in HardwareSerial.
...
begin(long) -> begin(unsigned long)
Conflicts:
hardware/arduino/cores/arduino/HardwareSerial.h
2011-05-12 16:58:56 -04:00
1747292711
Optimizing printing of numbers (writing a single buffer).
...
Fix from Bill Greiman via Limor.
2011-05-07 18:17:32 -04:00
cf044cd236
Adding serialEvent(), serialEvent1(), etc.
...
Called from within the serial receive interrupt. These are implemented as an empty weak function in the core that be overridden by the user's sketch.
http://code.google.com/p/arduino/issues/detail?id=263
2011-05-07 13:04:13 -04:00
c740778bf6
Refactoring the UART0 / USART0 receive interrupt handler.
2011-05-07 12:47:43 -04:00
694b8ad392
Changing Serial.flush() to write outgoing data, not drop incoming data.
...
This brings it in line with most other uses of flush(), both in and out of Arduino.
http://code.google.com/p/arduino/issues/detail?id=497
2011-05-07 12:05:27 -04:00
35a78b15ea
Added virtual destructor to Printable, which also requires new and delete operators to be added
2011-04-10 11:34:40 +01:00
facbd279b6
Added a brief explanation of how you'd use Printable
2011-04-02 11:33:27 +01:00
3540d92eb2
Added Printable interface class to allow printing of classes such as IPAddress
2011-04-01 21:10:38 +01:00
17d8fcb46d
Pulled out Server API into the NetServer base class, and a few minor changes to get the NetClient API to work well with the WiFly library
2011-03-31 16:19:17 +01:00
d12fe18480
Restoring concatenation of built-in types with String.
2011-03-31 10:56:14 -04:00
a5f6a42dd7
Pulled out Client API into a base class to allow multiple derived classes to use it, and moved it (plus IPAddress) out of the Ethernet library so that other libraries can find it. First steps in integrating the WiFly code so it's easier to switch between that and Ethernet
2011-03-28 12:08:53 +01:00
0ac0dcf158
Adding F("foo") syntax for flash strings.
2011-03-27 15:06:20 -04:00
e3c7a54725
String: removing implicit numeric conversions and new approach to "if (s)".
...
This makes explicit the String constructors that take numeric types and chars and removes the versions of concat() and operator=() and operator+() that accept numberic types.
It also replaces the operator bool() with a operator that converts to a function pointer. This allows for uses like "if (s)" but not "s + 123". See: http://www.artima.com/cppsource/safebool.html . This allowed removing the disambiguating operator+() functions and relying solely on StringSumHelper and anonymous temporaries once again.
Also, now treating unsigned char's like int when constructing Strings from them, i.e. String(byte(65)) is now "65" not "A". This is consistent with the new behavior of Serial.print(byte).
2011-03-26 18:52:54 -04:00
efae89ea0e
Commenting String API behavior.
2011-03-23 22:42:05 -04:00
7d4073ef73
Return an invalid string (not a partial one) when operator+() fails.
2011-03-19 11:14:17 -04:00
d3a5532d13
Starting to distinguish between empty strings and invalid (null) ones.
2011-03-18 21:45:27 -04:00
6f3ceb399d
Protecting String copy() and move().
2011-03-13 19:39:04 -04:00
488e672ea0
Adding additional String + operators for disambiguation.
...
The operator bool() means that you could implicitly convert a String to a bool and then add it to it an int, for example. Which means our operator+ has to match exactly or it will be ambiguous.
2011-03-13 19:31:10 -04:00
cc24d41b74
Moving move() to __GXX_EXPERIMENTAL_CXX0X__ only, adding operator bool().
2011-03-13 16:46:06 -04:00
f5f2e09636
Modifying String.concat() to return success or failure, not this.
...
Which means you can't chain multiple concat() calls together, but you can check if they succeeded or not.
2011-03-12 14:03:34 -05:00
6727c8a831
Don't return the string when modifying its value.
...
Changing toLowerCase(), toUpperCase(), trim() and replace() to return void instead of a reference to the string that's just been changed. That way, it's clear that the functions modify the string they've been called on.
2011-03-11 18:54:58 -05:00
7fa866ffea
Renaming append() back to concat().
2011-03-11 18:04:31 -05:00
9139094c36
Removing F("string") syntax for now.
...
We should probably add something like this back in later, but I want to do one thing at a time. This removes the __FlashStringHelper class as well.
2011-03-11 18:01:40 -05:00
1d9bbc01e3
Rewrite of the String class by Paul Stoffregen.
...
http://www.pjrc.com/teensy/string_class_experimental.html
2011-03-11 17:56:10 -05:00
6b890f8c7d
Fixing typo in boards.txt.
2011-03-09 21:22:04 -05:00
af841d166d
Flushing outgoing and incoming data in Serial.end().
...
That is, waiting for outgoing data to transmit and dropping any received data.
2011-03-06 12:20:42 -05:00
1bef2990b6
Fixing race condition in Serial write (Brian Cook).
2011-03-06 11:47:18 -05:00
10ecfa8bea
Moving TCCR1B reset into #ifdef check.
2011-03-06 11:29:35 -05:00
7f0cc2111c
Implemented serial transmit buffering.
...
Now Serial.write() places characters in the transmit buffer, and the data register empty interrupt reads and transmit them. Based loosely on the implementation here: ftp://wookey.org.uk/arduino.
http://code.google.com/p/arduino/issues/detail?id=262
2011-03-05 14:17:26 -05:00
19597b1d0b
Factoring pin definitions out of the core.
...
That is, there's now a pins/ directory in a platform, which includes multiple directories, each of which has its own pins_arduino.h. The boards.txt gets a new preferences, <BOARD>.build.pins, whose values is a sub-directory of the pins/ directory (possibly with a "platform:" prefix). That sub-directory is then placed in the include path during compilation.
2011-03-04 21:05:05 -05:00
afb60e1163
Moving all pin definitions into pins_arduino.h.
...
This is a step towards providing portability across AVR's by simply including an appropriate header file.
2011-03-03 23:54:33 -05:00
d59fcb8eed
Fixing warnings (David H. Lynch Jr).
2011-03-03 22:56:20 -05:00
5234a96b34
Rearranging internal #defines in headers.
2011-03-03 18:57:05 -05:00
ba14230883
Removing optimized digitalWrite(), digitalRead(), pinMode().
2011-03-03 18:46:45 -05:00
4ea2d99c1a
Re-arranging header files and small fixes to optimized core functions.
2011-03-02 23:05:25 -05:00
bb7a044884
Moving wiring.h contents into Arduino.h.
2011-03-01 20:00:16 -05:00
d05e4021d0
Renamed WProgram.h to Arduino.h.
2011-03-01 19:52:13 -05:00
97abbd7a31
Removing BYTE keyword (use Serial.write() instead).
2011-02-26 13:58:03 -05:00
13e3ba87e3
Small optimization in HardwareSerial.
...
begin(long) -> begin(unsigned long)
2011-02-25 18:36:46 -05:00
d15e9aa98a
Merge branch 'master' into new-extension
2011-02-22 22:02:22 -05:00
d180ad18a9
Revert "Changes to optimized digitalWrte(), etc."
...
This reverts commit aa1f1cbda9
2011-02-18 10:41:29 -05:00
956a4f2024
Revert "Adding noAnalogWrite() function to disable PWM."
...
This reverts commit 38d4a34fec
2011-02-18 10:40:56 -05:00
38d4a34fec
Adding noAnalogWrite() function to disable PWM.
...
Also, removing the inline version of digitalPinToTimer() (since we're not optimizing the functions that use it anyway). The noAnalogWrite() function is in wiring_analog.c, deriving from the previous turnOffPWM() which has moved from wiring_digital.c.
http://code.google.com/p/arduino/issues/detail?id=476
2011-02-12 14:47:08 -05:00
aa1f1cbda9
Changes to optimized digitalWrte(), etc.
...
Factoring out the implementation of digitalWrite(), digitalRead(), and pinMode() into macros that can either be inlined (for constant pin numbers) or executed within a function (non-constant pins). Removing testing for timers on pins in digitalWrite(), digitalRead(), and pinMode(). Moving pin to port macros from pins_arduino.h to wiring.h.
2011-02-11 19:29:46 -05:00
9dccd634c5
Optimized digitalWrite(), etc. from Alvaro Lopez.
2011-02-11 17:53:24 -05:00
94168bd0f4
Fix to optiboot infinite loop problem.
...
Explicitly setting R1 to 0 so that the watchdog timer is properly initializing, preventing it from timing out and resetting the processor.
http://code.google.com/p/optiboot/issues/detail?id=26
http://code.google.com/p/arduino/issues/detail?id=446
2011-01-15 13:29:08 +00:00
63f4021447
Changing String append to use realloc(); thanks to Paul Stoffregen.
...
http://code.google.com/p/arduino/issues/detail?id=332
2010-12-11 15:22:07 -05:00
d7ecd5e4e8
Minor ATmega8U2 firmware update and new .hex files.
...
Adding LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 to makefile to save space, updating release number to 0x0001.
2010-12-04 14:28:56 -05:00
f92b235be2
Minor bug fixes to the 8U2 USB-to-serial firmware.
2010-12-04 13:50:27 -05:00
32388c908f
Replacing custom String.toInt() function with a call to atol().
2010-12-03 23:12:41 -05:00
dce5e09e69
Fixing Linux UNO serial bug (thanks to Dean Camera).
...
Enabling INTERRUPT_CONTROL_ENDPOINT in the makefile so we don't miss control messages from Linux. Also deleted two unused USB events to save a few bytes of space (the Mega 2560 .hex is now exactly 4096 bytes).
2010-11-29 23:26:54 -05:00
d98d31eb1a
Redoing 448222e4b6 without all the extra files.
...
Adds toInt() to String, WCharacter.h (from Wiring), and an SD Datalogger example.
2010-11-29 15:20:30 -05:00
920212ee05
Revert "added toInt() function to WString".
...
This reverts commit 448222e4b6
2010-11-29 15:14:10 -05:00
448222e4b6
added toInt() function to WString
2010-11-29 11:31:00 -05:00
4dad13532f
pulseIn() now times out while measuring the pulse, not just while waiting for it to start.
2010-11-22 23:33:59 -05:00
fcc4188b15
SD File object implements Stream.
...
Added peak() and available() using a single byte buffer.
Added flush().
2010-11-20 11:45:05 -05:00
c11098c237
Fixing bug w/ subsequent calls to tone().
...
http://code.google.com/p/arduino/issues/detail?id=397
2010-11-11 23:57:12 -05:00
a403c19ade
Cast to encourage optimization of Serial ring buffer index calculations.
...
http://code.google.com/p/arduino/issues/detail?id=391
2010-11-11 23:29:21 -05:00
66755f9bce
Changing baud rate calculation to always use double speed mode except for 57600 baud at 16 MHz.
...
http://code.google.com/p/arduino/issues/detail?id=394
2010-11-11 23:28:21 -05:00
9b42d2dc03
Modifying Tone.cpp to use register-based (not CPU-based) #ifdefs.
2010-11-08 23:09:29 -05:00
b0bc52d7d5
Modifying basic functions (digital and analog, read and write) to use register-based ifdefs, not cpu-based.
...
http://code.google.com/p/arduino/issues/detail?id=307
http://code.google.com/p/arduino/issues/detail?id=316
http://code.google.com/p/arduino/issues/detail?id=323
http://code.google.com/p/arduino/issues/detail?id=324
2010-10-17 17:55:53 -04:00
b0888a34b5
Making attachInterrupt() check registers, not CPUs.
...
Patch by Mark Sproul, via Christian Maglie.
http://code.google.com/p/arduino/issues/detail?id=340
2010-10-17 14:05:46 -04:00
1cb3c97610
Making HardwareSerial tests register-based, not CPU-based.
...
Mark Sproul's patches, via Christian Maglie.
http://code.google.com/p/arduino/issues/detail?id=315
2010-10-17 13:36:02 -04:00
9cad196ae5
Changing #include <> to #include "" in Tone.cpp.
2010-10-09 17:08:19 -04:00
b3ba5d4f97
Fixing PWM on pins 9 & 10 on the Uno.
...
Resetting TCCR1B to 0 after it's configured by optiboot.
http://code.google.com/p/arduino/issues/detail?id=364
2010-10-02 13:38:10 -04:00
d0f8052f8e
More information on USB VID/PIDs.
2010-09-28 17:19:07 -04:00
e9a913066c
Replacing Arduino VID / PID with the Atmel-supplied ones.
2010-09-28 09:31:10 -04:00
0768ebed50
Adding note about Arduino VID and PIDs.
2010-09-27 12:20:38 -04:00
be6c36ee33
Adding readme about the firmwares.
2010-09-24 10:40:37 -04:00
ffa3ce71ee
Adding usbserial and usbdfu firmwares (and combined compiled .hex files).
2010-09-24 10:35:54 -04:00
4ab27234d3
Adding Arduino Mega 2560 board entry.
2010-09-24 10:17:01 -04:00
27109e3b1a
Adding the Mega 2560 bootloader and boards.txt / boards menu entry.
2010-09-24 10:10:57 -04:00
7087bcf5bd
Adding optiboot and Arduino Uno boards menu entry.
2010-09-22 09:04:33 -04:00
27cfd22066
1280 -> 1280/2560.
2010-09-08 22:33:33 +00:00
722b93dce4
Changing String::toCharArray() and getBytes() to accept a buffer, rather than return one. That way they don't expose the internal representation of the String class, allowing future optimization. Thanks to Paul Stoffregen.
2010-08-28 10:23:54 +00:00
f8077a96d7
Returning a reference to a dummy character for indices beyond the string length (in operator[]).
2010-08-28 09:55:26 +00:00
a48d96ee49
Adding some basic error checking to the String class (i.e. checking for a non-null buffer before modifying its contents).
2010-08-18 21:39:28 +00:00
5ede40be13
Now including stdlib.h from wiring.h so our abs() #define comes after the stdlib abs() definition (and therefore doesn't break it).
2010-08-17 21:50:41 +00:00
57e2c152f1
Adding shiftIn() from Wiring (no count or delaytime though).
2010-08-11 22:59:00 +00:00
54d367b1e0
Making Client inherit from Stream, which unforunately means taking peek() out of Stream for now, since there's no immediate implementation for Client.
2010-08-11 18:19:01 +00:00
05e8d675cd
Adding Arduino BT w/ ATmega328 to the boards menu.
2010-08-07 19:56:14 +00:00
3524387e70
Adding ATmega328 version of the Arduino BT bootloader, along with a Makefile for building it.
2010-08-07 19:48:59 +00:00
e2fe4d0dfa
No longer requiring WProgram.h for Print / Stream classes (replaced Arduino-specific type names in String).
2010-08-06 01:23:19 +00:00
0aec45afbc
Moving SPI pin definitions into core (from SPI library): SS, MISO, MOSI, and SCK.
2010-08-02 22:33:11 +00:00
94045e292a
changing available() to return an int (because the Ethernet Client class or another stream might need more than 255 bytes).
2010-08-02 22:23:48 +00:00
81e7814887
added more String examples
2010-07-27 22:59:18 +00:00
4e33e6cb9f
Reverting changes to String class and modifying to allow + and += to work on more types.
2010-07-27 14:20:56 +00:00
cd4c0e56e2
removed append() from String library
2010-07-27 10:18:04 +00:00
b78768f761
checked in Xiaoyang Feng's changes to String library
2010-07-27 10:09:09 +00:00
27b3254e99
Checked in Xiaoyang's changes to String library
2010-07-27 10:06:49 +00:00
8fcb098533
Checked in Xiaoyang's changes to String library
2010-07-27 10:06:43 +00:00
52e0e1a999
INTERNAL -> INTERNAL1V1 AND INTERNAL2V56 on the Mega (issue #194 ).
2010-07-10 21:07:51 +00:00
4fa7eb8e32
whitespace.
2010-07-05 16:08:35 +00:00
31601ffe77
Adding a peek() function to Stream and HardwareSerial (Serial).
2010-07-04 23:31:55 +00:00
934312682e
Adding support for printing Strings to the Print class.
2010-07-04 23:22:34 +00:00
880bc682a9
Modifying String from new/delete to malloc()/free(). Also #include'ing WString.h from WProgram.h.
2010-07-04 16:36:52 +00:00
99abaed344
Adding WString.h and WString.cpp straight from Wiring (r. 726). Won't actually work yet.
2010-07-04 16:27:23 +00:00
e2f5f0c9d6
Disabling interrupts while digitalWrite() and pinMode() modify registers (issue #146 ).
...
Updating revisions.
2010-06-12 20:32:58 +00:00
e2169fa0a4
Re-enabling timer 2 pwm after tone() ends.
...
Factored out common code to disable timers.
2010-06-12 19:47:41 +00:00
0557d46fc2
Adding a basic Stream interface and modifying HardwareSerial to inherit from it.
2010-05-28 22:41:03 +00:00
8f416eb54a
More accurate delay() function from BenF.
2010-05-25 20:16:15 +00:00
3738f450c0
Adding A0=14, A1=15, etc. aliases for analog input pins and modifying analogRead() to accept them (in addition to 0, 1, 2, etc.). Removing some unused code elsewhere.
2010-05-16 04:05:40 +00:00
282d623180
Adding 5V, 16 MHz versions of the Arduino Pro and Pro Mini (ATmega328 and ATmega168) to the boards menu.
2010-05-16 02:53:51 +00:00
5d54fbf70b
Removing some Processing stuff that we don't need.
...
Moving the Arduino Fio up in the boards menu.
2010-05-08 20:37:54 +00:00
d5b0dfd527
Added Fio to boards.txt, now that it's part of the lineup.
2010-03-28 15:45:59 +00:00
d91b4c1f38
Limiting tone generation to timer 2 only to prevent conflicts with the Servo library.
2010-01-09 17:02:27 +00:00
b4402e1e26
Adding tone() and noTone() functions, using Brett Hagman's Tone library.
2009-12-29 20:57:07 +00:00
6672d51d56
Removing (no longer maintaining) the Makefile.
2009-12-28 15:39:19 +00:00
def86681b7
Adding precision parameter for printing of floats / doubles. Restructured the print() and println() functions a bit.
2009-12-25 20:20:27 +00:00
c82a43abde
Adding Serial.end().
2009-12-23 00:00:17 +00:00
3063c34ebe
Fixing bug in calling micros() from interrupts: http://code.google.com/p/arduino/issues/detail?id=55
2009-12-18 17:44:08 +00:00
ba5935e273
No longer disabling interrupts in delayMicroseconds(): http://code.google.com/p/arduino/issues/detail?id=67
2009-12-18 17:04:51 +00:00
d2a38e4b5a
Improving third-party hardware support:
...
- moving back to multple cores per platform
- using target instead of platform
- moving per-board and per-programmer preferences out of Preferences.java and into a new Target class
- adding a new "target" preference
- support for platform:value values in board preferences for bootloader path and core
- XXX: need to support platform:value syntax for board upload.using preferences.
2009-11-21 23:23:43 +00:00
e5b5f25476
Third-party cores seems to sort of work now, but burning bootloaders is probably broken.
...
Need to decide on the format for the boards.txt file.
2009-11-07 18:56:45 +00:00
3075c8e4fd
Moving libraries out of arduino platform / core directory and to top-level.
2009-11-07 17:54:56 +00:00
ff0336a3b6
Moving libraries into arduino/
2009-11-07 17:07:59 +00:00
ab1eb4aaa0
Moving things around.
2009-11-07 17:05:21 +00:00
David A. Mellis
Zach Eveland
amcewen
ricklon
WestfW
Tom Igoe
Tom Igoe