f39ec37722
reset the Leonardo board when leaving the bootloader, before starting the sketch
...
Done so all IO and other registers are properly reinitialized when a new sketch is uploaded or when an existing sketch is started. Uses a watchdog timeout with a 15 ms period to accomplish the reset. Bootloader checks the reason for reset and only enumerates as bootloader and enters the programming loop if reset was NOT caused by WDT.
2011-12-31 12:19:08 -05:00
8f9ec88f57
Merge branch 'master' of github.com:arduino/Arduino into new-extension
2011-12-31 11:21:44 -05:00
f520bb5051
Simplifying microseconds <-> clock cycles conversions. (Rob Tillaart)
...
This should fix problems with overflows in pulseIn(). It may make millis() slightly less precise for clock speeds that aren't multiple of 1 million, but we don't really support those anyway.
http://code.google.com/p/arduino/issues/detail?id=675
2011-12-30 18:05:12 -05:00
80a2154279
Fixing ArduinoISP sketch by lowering baud rate to 9600 (from 19200).
...
http://code.google.com/p/arduino/issues/detail?id=661
2011-12-28 18:43:36 -05:00
bdf7107507
bootloader merged with blink sketch
...
full set of descriptors in sketch fixes driver installation issue on Win7.
2011-12-26 17:19:48 -05:00
20e7f2d354
changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream.
2011-12-20 17:09:44 -05:00
20564fb1d0
Revert "changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream."
...
This reverts commit de1d5fc0cb
2011-12-20 17:08:07 -05:00
de1d5fc0cb
changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream.
2011-12-20 17:00:19 -05:00
d874bc9832
fixed attachInterrupt() on Leonardo
...
had to define a separate block for the 32U4 since it looks like a Mega-series board based on a simple register trick. Only two useable HW interrupts though, compared to the Megas' 8, and numbering differs.
2011-12-19 15:40:12 -05:00
fd28193336
added asynchronous buffering of received CDC characters
...
This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp.
Adds public accept() method to CDC.
2011-12-18 17:52:35 -05:00
6a44faedbb
fixed digitalWrite on timer 4 pins (D6 and D13)
2011-12-18 14:18:38 -05:00
4b358f21d9
fix bootloader size in boards.txt - 2 kB instead of 4 kB
2011-12-18 12:52:30 -05:00
699315c359
fixed TIMER4 use on Leonardo
...
ATMEGA32U4 has major differences in TIMER4 registers compared to ATMEGA1280 and 2560. turnOffPWM, analogWrite, and initialize routines had wrong registers, bit names, etc.
2011-12-11 19:56:50 -05:00
eb380de972
Updated reference voltage defines for ATmega1284P.
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:18:15 -05:00
d7d0e304d5
Support 3rd external interrupt on ATmega1284P (maniacbug)
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:17:27 -05:00
0d70c7272e
Fixing delayMicroseconds() timing for 20 MHz clocks. (Erdem U. Altinyurt)
...
http://code.google.com/p/arduino/issues/detail?id=306
2011-12-02 17:04:20 -05:00
dca1dc429a
Removing Leonardo (and Mouse/Keyboard examples) for Arduino 1.0 release.
...
These will return, but the code isn't finished yet so I don't want to include it.
2011-11-28 18:47:45 -05:00
3df132aea9
Correcting Arduino Mini w/ ATmega328 bootloader file and fuses (untested).
2011-11-25 19:26:01 -06:00
ed48d17e20
readBytes() and readBytesUntil() handle zero bytes and return # of bytes read.
...
http://code.google.com/p/arduino/issues/detail?id=586
2011-11-19 16:23:19 -05:00
4119b9089b
Adding Arduino Mini w/ ATmega328.
...
http://code.google.com/p/arduino/issues/detail?id=710
2011-11-19 16:22:46 -05:00
75eb722759
Leonardo bootloader now sends iSerial string during enumeration. Seems to satisfy Windows' composite device requirements.
2011-11-16 16:38:22 -05:00
9b58072423
Fixed size of const array mapping digital pin number to bit mask.
2011-11-16 12:15:57 -05:00
21ee685489
Updated digital pin and port mapping constants in pins_arduino.h for Leonardo.
...
Changed digital_pin_to_port_PGM[] and digital_pin_to_bit_mask_PGM[] to reflect changes to constants for SPI and analog pins
2011-11-16 11:20:38 -05:00
5f574b3634
Swapped Dx assignment for MISO and SS to make numbering more sane (Dave Mellis). Also updated comments on pin numbers.
2011-11-16 11:00:21 -05:00
ba5d66c26f
Fixed handling of Ax constants on Leonardo
...
Fixed mistake in assignment and handling of A6-A11 constants. Renumbered constants for all Ax channels.
2011-11-16 10:49:41 -05:00
3ee847c8e2
updated pins_arduino.h for Leonardo to reflect final mapping of A6-A11
2011-11-15 09:48:09 -05:00
56d06e15ed
Merge branch 'new-extension' of github.com:arduino/Arduino into new-extension
2011-11-15 09:33:11 -05:00
6ceb9a19de
Added latest firmware for usbserial (not combined with DFU)
2011-11-12 12:57:30 +01:00
17adbbcfc5
Added latest firmware for atmega16u2 on R3 boards
2011-11-11 11:38:04 -05:00
cd6aa2b1f3
restored original non-interrupt-driven DiskLoader
...
Interrupt-driven version was a dead-end - too many bugs with that approach.
2011-11-09 14:04:59 -05:00
f0801e61e6
updated analog pin assignments and declared TWI/I2C pins
...
Fixed analog pin to ADC channel mapping to match new scheme. Changed mapping of analog pins to digital channels so that A6-A11 point back to the correct digital pins. Declared SDA and SCL pins.
(All from Federico Vanzati's comments)
2011-11-08 22:06:15 -05:00
42fadb6f6d
added 12th ADC channel for Leonardo. cleaned up and corrected comments for pin functions.
2011-11-02 07:37:39 -04:00
c8f495ba7f
changed Leonardo PID to 0x0032 for Diskloader testing. updated .inf to match.
2011-10-31 23:44:32 -04:00
76ed870de8
Merge branch 'new-extension' of github.com:arduino/Arduino into diskloader_reboot
2011-10-31 21:42:09 -04:00
4a77aea4e5
check to see if a sketch has been loaded before jumping out of bootloader
2011-10-31 21:36:29 -04:00
10001866e6
Protecting the version of parseInt() and parseFloat(). (Paul Stoffregen)
...
This should allow us more flexibility in determining how to handle these functions later. For example, in specifying that initial characters shouldn't be skipped.
http://code.google.com/p/arduino/issues/detail?id=698
2011-10-29 17:40:23 -04:00
a6381bb564
renamed bootloader file
2011-10-27 11:52:10 -04:00
a6a59f1783
Revert "Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot"
...
This reverts commit df9835efafec45af8bfa
2011-10-27 11:45:13 -04:00
f2bd8a5394
Merge branch 'new-extension' of github.com:arduino/Arduino into diskloader_reboot
...
Conflicts:
hardware/arduino/variants/mega/pins_arduino.h
libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
2011-10-27 11:41:02 -04:00
03e1515a51
changes in core and boards.txt to support new bootloader
...
old bootloader could fit in only 2 kB of flash. new version has to have a 4 kB block - jump-to address and boards.txt must reflect this.
2011-10-27 11:36:10 -04:00
be51da6b0d
bootloader runs sketch after timeout, added bootloader LED breathing
2011-10-27 11:27:24 -04:00
b70f79ea2c
cosmetic changes - remove old comments, unused code
2011-10-27 10:54:21 -04:00
040a469f79
removed conditional compilation checks for CDC_ENABLED
...
bootloader must always have CDC enabled
2011-10-27 10:48:26 -04:00
9dc9e60704
removed old comments and unused USB core code
2011-10-27 10:45:13 -04:00
3d848a5b9a
brought nuevo_diskloader changes over to diskloader
...
Moved nuevo_diskloader files into diskloader directory. Changed back to real PID for Leonardo
2011-10-27 10:23:06 -04:00
df9835efaf
Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot
...
Conflicts:
app/src/processing/app/Editor.java
app/src/processing/app/Sketch.java
build/shared/examples/4.Communication/SerialCallResponse/SerialCallResponse.pde
build/shared/lib/theme/theme.txt
hardware/arduino/cores/arduino/HardwareSerial.h
hardware/arduino/cores/arduino/Print.cpp
hardware/arduino/cores/arduino/WString.h
hardware/arduino/variants/mega/pins_arduino.h
libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
libraries/Firmata/examples/EchoString/EchoString.ino
libraries/SD/File.cpp
libraries/SoftwareSerial/SoftwareSerial.cpp
libraries/SoftwareSerial/SoftwareSerial.h
libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
libraries/SoftwareSerial/keywords.txt
2011-10-27 09:32:27 -04:00
ec45af8bfa
working bootloader. had to move interrupts back to application section. NOTE: need to have sketch CDC jump to appropriate place for bootloader - 4k from end instead of 2k
2011-10-26 16:51:42 -04:00
32614bf841
working (?!?!?!) bootloader. doesn't yet restart chip after upload completes.
2011-10-26 12:53:57 -04:00
e806be8c2a
uploading now completes using RC2 on Win7
2011-10-26 11:28:07 -04:00
9e72b06a75
closer still - now up to 4680
2011-10-25 19:04:31 -04:00
d50b95eac1
progress on bootloader bug - have implemented blocking USB_Recv. avrdude makes it to flash programming address 0400 or so before hanging
2011-10-25 18:56:10 -04:00
d9f9676d23
Bug fix in replace().
...
http://code.google.com/p/arduino/issues/detail?id=694
2011-10-25 11:15:14 -04:00
cca9401589
fixed logic bug in waiting for synch. stripped out all Serial stuff
2011-10-24 22:12:45 -04:00
55178d9b8d
removed old comments
2011-10-24 21:36:06 -04:00
f729e0321b
Moving ARDUINO_MAIN from main.cpp to wiring_digital.c and hiding PA, PB, etc.
...
http://code.google.com/p/arduino/issues/detail?id=677
http://code.google.com/p/arduino/issues/detail?id=691
2011-10-24 16:50:15 -04:00
18838fb44a
Renaming LED to LED_BUILTIN.
...
http://code.google.com/p/arduino/issues/detail?id=651
2011-10-24 16:45:44 -04:00
8336c88211
Correcting analogReference() constants for ATtiny24/44/84 and 25/45/85.
...
DEFAULT, EXTERNAL, and INTERNAL have different values on those processors.
2011-10-24 15:44:01 -04:00
3e775af6d8
bootloader responds properly now. nearly there - still have an issue with it falling out of sync after completing most operations
2011-10-23 16:49:36 -04:00
fa26e288a5
more attempts to get parameter sending to work
2011-10-21 20:30:55 -04:00
44b90b9f6a
some progress on responding to parameter requests
2011-10-21 20:06:17 -04:00
79dbae2eb7
avrdude communication starting to work - responds to sync, fails when trying to respond to STK_GET_PARAMETER
2011-10-21 19:36:53 -04:00
e12b578462
continuing to port programming code. temporarily changed PID to test on Windows (it works)
2011-10-21 18:21:04 -04:00
6ca5bf3acb
starting to port bootloader programming code - testing as I go
2011-10-21 18:03:34 -04:00
2d8ced65d1
added and modified Program() routine
2011-10-21 17:51:04 -04:00
0dc5f19ea9
cleaning up code and comments in main - getting rid of leftover stuff from experiments
2011-10-21 17:25:59 -04:00
f59451b04d
Enumerates! used inline ASM for operation which moves interrupts to boot section
2011-10-21 17:16:48 -04:00
2f46c2a6e6
can now enable interrupts but EORSTE or SOFE in USB_::attach() still cause bootloader to hang
2011-10-21 16:51:25 -04:00
bc669c14f8
added more USB source adapted from sketch core. still not enumerating.
2011-10-21 16:33:52 -04:00
ec09ead6ac
Lowering timer 1 prescale factor (to 8 from 64) for F_CPU less than 8 MHz.
...
Otherwise, you can see flicker on an LED.
2011-10-21 11:54:11 -04:00
b86ce43044
initial commit of new Diskloader-based bootloader experiment
2011-10-21 08:02:17 -04:00
e7ff928762
Putting the Uno lock bits back.
2011-10-10 12:28:09 -04:00
8efc3920f9
Explicitly set the SHELL variable when OS=windows, so that we'll use
...
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.
http://code.google.com/p/arduino/issues/detail?id=667 )
(cherry picked from commit fc8cacb9a3
2011-10-10 12:11:18 -04:00
de4d73511d
Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
...
(cherry picked from commit c56a1293d7
2011-10-10 12:11:18 -04:00
b2c43c2e55
Allow the READ PARAMETER command to return our version number.
...
(significant size impact: 14 bytes!)
Initialized "address" to eliminate compiler warning (4 bytes!)
Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)
Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328. The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted. Which should be less of a problem
now that the source is buildable without installing crosspack.
(cherry picked from commit 7b1ee0f1b0
2011-10-10 12:11:17 -04:00
61e4d16675
Modify Uno "lock" bits in boards.txt to make bootloader readable by
...
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
(cherry picked from commit 39a496616f
2011-10-10 12:11:17 -04:00
a57d315e4b
http://code.google.com/p/arduino/issues/detail?id=368
...
Optiboot does not support ArduinoasISP programmer.
When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed. Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch. This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested. Works! Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
(cherry picked from commit e81c1123b6
2011-10-10 12:11:16 -04:00
1bbded4f34
(make sure .hex and .lst are updated as well.)
...
(cherry picked from commit ece29c3805
2011-10-10 12:11:16 -04:00
091dc9a7f9
Fix errors in LDSECTIONS refactoring
...
(found during atmega8 testing.)
(cherry picked from commit 422398e08c
2011-10-10 12:11:16 -04:00
93f7515ecf
Update version to reflect previous edit. Sigh.
...
(cherry picked from commit e28b716f88
2011-10-10 12:11:15 -04:00
07a88dc998
Shrink code by using registers for variables "length" and "address"
...
http://code.google.com/p/optiboot/issues/detail?id=33
Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38
Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
(cherry picked from commit 6f7687b0f9
2011-10-10 12:11:15 -04:00
10019bb0df
Add a version number to the optiboot source and binary.
...
http://code.google.com/p/arduino/issues/detail?id=554
end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip. (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)
Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)
Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.
Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section. (This would
need to be done elsewhere as well to handle all bootloader programming
techniques. Notably Arduino's boards.txt
Note that this change does not change the "code" portion of optiboot
at all. The only diffs in the .hex files are the added version word
at the end of flash memory.
(cherry picked from commit 00706284de
2011-10-10 12:11:15 -04:00
287aae6b42
Update shell script makeall
...
(cherry picked from commit d4632cb095
2011-10-10 12:11:14 -04:00
92e746d0a5
This is a relatively significant edit that brings the Arduino copy of
...
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)
This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h
These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
update optiboot to the point of the latest optiboot project sources.
These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
optiboot leaves timer1 configured when starting app, breaks PWM on
pin 9 and 10. (fixed with a workaround in arduino core.)
aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
Support for ATmega8 and mega88.
Fix fuse settings for mega168 _ISP targets
Additional new platforms (mega, sanguino)
http://code.google.com/p/optiboot/issues/detail?id=26
Set R1 to 0 (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
Fails to build correctly for mega88
After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
(cherry picked from commit e2812ef91c
2011-10-10 12:11:14 -04:00
72e425a41d
http://code.google.com/p/arduino/issues/detail?id=517
...
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.
This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
(cherry picked from commit 6840b77643
2011-10-10 12:11:14 -04:00
11b2d86ff1
Makefile modification to allow building optiboot in more environments.
...
Allows building within the Arduino Source tree, and within the Arduino
IDE tree, as well as using CrossPack on Mac.
Adds README.TXT to track arduino-specific changes (and documents the
new build options.)
This addresses Arduino issue:
http://code.google.com/p/arduino/issues/detail?id=487
And optiboot issue
http://code.google.com/p/optiboot/issues/detail?id=1
(which can be thought of as a subset of the Arduno issue.)
Note that the binaries produced after these Makefile changes (using any
of the compile environments) are identical to those produced by the
crosspack-20100115 environment on a Mac.
(cherry picked from commit 2d2ed324b4
2011-10-10 12:11:13 -04:00
f093cc6970
Merge pull request #30 from WestfW/master
...
Significant optiboot upgrade.
2011-10-10 09:01:56 -07:00
a08657b350
Moving USBasp in programmers menu.
2011-10-10 11:58:38 -04:00
2ffad50619
Merge pull request #41 from chiva/patch-1
...
Added USBasp to programmers list
2011-10-10 08:56:15 -07:00
ca671fdc05
Fixing more warnings (Paul Stoffregen).
2011-10-10 11:28:44 -04:00
fc8cacb9a3
Explicitly set the SHELL variable when OS=windows, so that we'll use
...
the same shell regardless of whether other shells are installed
(different shells have different behavior WRT directory component
separators, so this matters.
http://code.google.com/p/arduino/issues/detail?id=667 )
2011-10-05 01:41:03 -07:00
85c109f255
Fixing warnings in Stream (Paul Stoffregen)
...
http://code.google.com/p/arduino/issues/detail?id=208
2011-10-02 09:44:21 -04:00
6554ae653c
Using alternate timer 0 overflow interrupt signal name for ATtiny24/44/84.
2011-09-30 11:24:44 -04:00
bd823bf201
Changing Ethernet upload protocol from stk500 to arduino.
...
http://code.google.com/p/arduino/issues/detail?id=649
2011-09-28 23:26:37 -04:00
de22990133
Updating bootloader comments.
2011-09-16 20:31:41 -04:00
df2270d4d5
Commenting out micro board for now since it's not being released yet.
2011-09-16 20:26:43 -04:00
19d7d4b066
Updating Micro bootloader (previous one was identical to Leonardo).
2011-09-16 18:25:59 -04:00
d532d85059
added Mouse.isPressed() method
2011-09-16 16:59:14 -04:00
00c3631467
made some Keyboard methods private
2011-09-16 16:43:07 -04:00
30fc9919e1
added support for TIMER4D used for PWM on Leonardo and Micro D6
2011-09-16 16:36:42 -04:00
b898a35f76
new bootloader binaries for Micro and Leonardo - uses new assignment for TXLED pin
2011-09-16 16:24:21 -04:00
a4ccf47ec7
updated pin assignment again based on design files for Leonardo
2011-09-16 16:12:39 -04:00
23d0d05844
updated pin mappings for bootloader and pins_arduino.h in anticipation of final hardware.
2011-09-16 15:46:51 -04:00
8638d5b4e9
restored accidentally-deleted Leonardo type in boards.txt
2011-09-16 14:54:42 -04:00
75cfefcd0a
restored Micro entry in boards.txt, made separate bootloader images for Leonardo and Micro.
2011-09-16 14:47:42 -04:00
cd5ecfff1c
Merge https://github.com/arduino/32U4 into new-extension
2011-09-16 14:34:55 -04:00
667da698d7
added automatic one-shot TX and RX LED control for sketch USB
2011-09-16 14:32:25 -04:00
5ec35fc68c
Moving Leonardo after Uno.
2011-09-16 14:24:11 -04:00
6b7d24edb0
added to sketch iProduct and iManufacturer strings identifying board as either an "Arduino Leonardo" or "Arduino Micro" manufactured by "Arduino LLC"
2011-09-16 12:29:47 -04:00
4452de6eaa
bootloader iProduct definition changed to "Arduino Leonardo Bootloader" or "Arduino Micro Bootloader". selection depends on PID passed in at compile time
2011-09-16 12:09:51 -04:00
66b484e53e
added to the bootloader iProduct and iManufacturer strings identifying board as an "Arduino Leonardo" manufactured by "Arduino LLC"
2011-09-16 11:56:33 -04:00
6bbc7b2db7
faster LED breathing animation in bootloader
2011-09-16 11:18:39 -04:00
ab8fc5aab7
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
2011-09-16 10:27:11 -04:00
90f285ae9c
Added USBasp to programmers list
2011-09-16 01:56:22 +03:00
d4e9db463b
fixed analog pin mapping for 32u4
2011-09-13 23:52:26 -04:00
18d76057fe
fixed Mouse button assignments
2011-09-13 21:37:46 -04:00
e3fa1ed039
made Mouse.buttons() private. removed MOUSE_ALL macro
2011-09-12 08:14:13 -04:00
f3d8628c5e
Don't consume trailing char in parseInt() and parseFloat (Paul Stoffregen).
...
http://code.google.com/p/arduino/issues/detail?id=624
2011-09-09 16:24:47 -04:00
6f65578b99
updated Leonardo INF with correct PID and created new Micro INF.
2011-09-08 20:45:10 -04:00
b1c8d0be34
in bootloader reduced delay between receiving stk500 'Q' and jumping to application
2011-09-08 20:38:23 -04:00
94879d3ac6
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
...
Conflicts:
build/linux/dist/tools/avrdude.conf
2011-09-08 20:26:47 -04:00
db7013f95c
fixed bug where sketches over 28k caused subsequent auto-reset-and-upload attempts to fail. fixed bug in reboot routine, changed fuses to select 1024-word bootloader size, disabled hardware boot enable.
2011-09-08 19:31:18 -04:00
c0b45364b8
disabling watchdog in bootloader
2011-09-08 18:12:11 -04:00
11e3921c81
misc. bootloader fixes: increased wait time after receiving avrdude 'Q', increased bootloader timeout, and fixed LED one-shot timing
2011-09-08 16:23:29 -04:00
e870f070db
added compile-time definition of sketch PID. PID is pulled from variants/leonardo or the new variants/micro as appropriate.
2011-09-08 15:52:05 -04:00
508eb9b72f
removed leftover pins/ directory
2011-09-08 15:43:16 -04:00
301f1b8552
Revert "added Micro section to boards.txt. specified different bootloader hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt"
...
This reverts commit 3b5122e138
2011-09-08 15:40:41 -04:00
c295917fad
Revert "support compile-time passing of PID to Leonardo/Micro sketches. PID comes from boards.txt - different for Micro and Leonardo"
...
This reverts commit 3e0d195492
2011-09-08 15:39:17 -04:00
3e0d195492
support compile-time passing of PID to Leonardo/Micro sketches. PID comes from boards.txt - different for Micro and Leonardo
2011-09-08 11:23:55 -04:00
3b5122e138
added Micro section to boards.txt. specified different bootloader hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt
2011-09-08 11:00:40 -04:00
48212b11fd
changed PIDs for Leonardo and Micro. PIDs are now defined in the Makefile
2011-09-08 09:47:17 -04:00
4db174e67b
removed all bootloader mass storage and MSC references
2011-09-08 09:12:30 -04:00
7d8d20894c
Making Print::write(char *) non-virtual.
...
http://code.google.com/p/arduino/issues/detail?id=607
2011-09-07 18:41:05 -04:00
ab36bd5dbb
Changing to a simpler mental model for serialEvent (Paul Stoffregen).
...
http://code.google.com/p/arduino/issues/detail?id=626
2011-09-07 17:47:17 -04:00
fa901e2ba4
changed auto-reset trigger condition to fix auto-reset-and-upload for Windows. now reboots when a port, opened at 1200 bps, is closed.
2011-09-06 20:58:00 -04:00
5e058a8aa3
changed baudrate for auto-reset-and-upload back to 1200 bps. specified arduino protocol for Leonardo avrdude upload.
2011-09-05 13:08:05 -04:00
e24e9499cf
Merge branch 'new-extension' of https://github.com/arduino/Arduino into new-extension
...
Conflicts:
build/macosx/dist/tools-universal.zip
build/windows/avr_tools.zip
hardware/arduino/cores/arduino/HardwareSerial.cpp
2011-09-05 12:53:45 -04:00
83da177280
Merge branch 'new-extension' of github.com:arduino/Arduino into new-extension
2011-09-02 19:58:39 -04:00
85bf4252f0
Updating to avrdude 5.11 (Windows). stk500 -> arduino in boards.txt.
...
http://code.google.com/p/arduino/issues/detail?id=606
2011-09-02 19:57:29 -04:00
bf5e928e4c
Adding Arduino Ethernet and Arduino Mega ADK (joint w/ Mega 2560) to boards menu.
...
http://code.google.com/p/arduino/issues/detail?id=594
2011-08-31 16:48:06 -04:00
1278144d50
Moving serialEvent() calls from RX interrupts to main for() loop (after loop()).
...
http://code.google.com/p/arduino/issues/detail?id=584
2011-08-31 15:52:56 -04:00
61b33f11ce
Renaming writeError() to getWriteError() in Print (and Stream and friends).
...
http://code.google.com/p/arduino/issues/detail?id=608
2011-08-31 15:39:20 -04:00
3389d28e20
added Mouse press() and release()
2011-08-30 20:23:06 -04:00
7d26163b16
on a CDC or HID write() error, call setWriteError(). better handling of USB_Send errors in CDC.
2011-08-30 17:25:35 -04:00
a6093a8d91
Created an abstract base class UDP to match the Client and Server classes, and reworked the Ethernet library to use it and derive EthernetUDP.
2011-08-30 21:27:31 +01:00
6049e4455a
support for non-Leonardo boards is back!
2011-08-30 11:50:08 -04:00
0b3acaea21
CDC and HID write() routines now return non-void - brought in line with new write behavior
2011-08-30 11:04:34 -04:00
0a34c0f35e
brought leonardo folder in line with new variants scheme
2011-08-30 10:45:41 -04:00
91f89da73a
Merge branch 'mainline' into new-extension
2011-08-30 08:38:06 -04:00
ad5dead85a
Changed names of the Ethernet classes: Client -> EthernetClient, NetClient -> Client, and basic testing performed
2011-08-29 22:36:28 +01:00
b7533c1839
Final changes to integrate latest core updates to WiFly branch
2011-08-28 22:26:07 +01:00
e1748e79d7
Merge branch 'master' into wifly_integration
2011-08-28 20:28:53 +01:00
6345e2942a
auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to support 300 bps connection, changed core and boards.txt to match
2011-08-27 20:32:34 -04:00
4588120106
Merge branch 'new-extension' of https://github.com/arduino/Arduino
2011-08-27 23:53:42 +01:00
bef7d736d2
bootloader ends as soon as sketch upload finishes. restored pulsing of LED while bootloader running.
2011-08-27 07:00:07 -04:00
b73cf39d94
Moving write errors out of return value into separate API methods.
...
write(), print(), println() now return size_t (and don't use negative values to signal errors).
Print adds writeError() for checking for write errors, clearWriteError() to reset the flag to false, and a protected setWriteError() for signalling errors.
http://code.google.com/p/arduino/issues/detail?id=598
2011-08-26 16:08:14 -04:00
929597375b
Changing from long to ssize_t (int) for write(), print(), println() return.
2011-08-26 14:20:41 -04:00
eebe997dce
bugfix - Serial.write() would try to send even if no CDC connection was open.
2011-08-24 21:04:30 -04:00
ff5fe87864
changed auto-reset method for upload: now triggered by opening port at 1200 bps
2011-08-24 17:12:28 -04:00
8059abe581
write(), print(), and println() now return number of bytes written.
...
The type is long, and negative values indicate errors. Needs more testing.
http://code.google.com/p/arduino/issues/detail?id=551
2011-08-23 19:12:03 -04:00
b788ad593f
Distinguishing those boards with eight analog inputs (Fio, BT, Nano, Mini).
...
http://code.google.com/p/arduino/issues/detail?id=499
2011-08-23 17:29:20 -04:00
d00f0949ed
Renaming pins/ directory to the more generic variants/
...
http://code.google.com/p/arduino/issues/detail?id=588
2011-08-23 17:07:39 -04:00
dd539bacf8
USB microcontrollers will call USB.attach() after init(), before setup()
2011-08-18 19:59:35 -04:00
5b989d13b3
HW Serial on pins 0 and 1 works. Accessed by Serial1.* methods
2011-08-18 19:40:04 -04:00
4b0a87b405
Stream.readBytesUntil() now writes null terminator within length.
2011-08-18 15:13:47 -04:00
cb39ad9739
A few API changes to new Stream parsing functions.
...
Renamed readChars() -> readBytes(), readCharsUntil() -> readBytesUntil().
Changed timeouts to milliseconds from seconds; default from 5 to 1 seconds.
Removed readCharsBetween().
2011-08-17 14:16:47 -04:00
682b58e577
Integrating Stream searching & parsing (Michael Margolis)
...
This from Michael's TextFinder library, incorporated into the Stream class: find(), findUntil(), parseInt(), parseFloat(), readChars(), readCharsUntil(), readCharsBetween(), setTimeout().
2011-08-17 13:53:49 -04:00
e3848670a7
Temporary fix for auto-reset from IDE. Will reset chip when DTR is asserted, no matter what CDC baud rate is selected.
2011-08-16 13:43:55 -04:00
3f6df054ee
Serial via USB works
...
Integrated rest of Peter's USB implementation
2011-08-14 16:59:34 -04:00
e254d2989d
LEDs for D13, TX, and RX are more in line with Uno-like behavior during sketch uploading.
...
D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14 16:02:16 -04:00
c149be22f7
rebuilt Diskloader, added LED control macros for Leonardo, removed Microtouch defines
2011-08-14 15:11:23 -04:00
13a269df2e
increased bootloader delay to approx. 3.5 s
2011-08-14 14:29:44 -04:00
d338f22bde
Adding basic macros for analog + digital pin information.
...
http://code.google.com/p/arduino/issues/detail?id=495
2011-08-12 18:27:00 -04:00
f179794a45
Adding pin-change interrupt pin mapping macros to pins_arduino.h.
...
http://code.google.com/p/arduino/issues/detail?id=490
2011-08-12 17:31:22 -04:00
f14fd94d0e
Adding SCL, SDA, and LED #defines.
2011-08-12 16:59:24 -04:00
213091f487
cleaned up types. set D5 as not a PWM pin for now.
2011-08-11 14:16:13 -04:00
9b954df303
committed USB API, initial HardwareSerial-USBSerial integration
2011-08-11 14:08:38 -04:00
0ecdd723cf
diskloader source and binary for 32u4
2011-08-11 10:31:39 -04:00
cdf887b10b
support for 32u4 and Leonardo pins, uploading, and bootloader programming
2011-08-10 23:36:36 -04:00
c93fd746c4
Disabling terminal / monitor.
2011-06-29 22:48:07 -04:00
c56a1293d7
Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
2011-06-14 23:57:41 -07:00
7b1ee0f1b0
Allow the READ PARAMETER command to return our version number.
...
(significant size impact: 14 bytes!)
Initialized "address" to eliminate compiler warning (4 bytes!)
Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)
Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328. The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted. Which should be less of a problem
now that the source is buildable without installing crosspack.
2011-06-14 10:24:27 -07:00
39a496616f
Modify Uno "lock" bits in boards.txt to make bootloader readable by
...
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
2011-06-14 01:13:41 -07:00
e81c1123b6
http://code.google.com/p/arduino/issues/detail?id=368
...
Optiboot does not support ArduinoasISP programmer.
When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed. Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch. This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested. Works! Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
2011-06-13 19:07:07 -07:00
8dfee1fb74
Merge remote branch 'upstream/new-extension'
...
Moved my fork to the Arduino 1.0 codebase
2011-06-11 21:27:18 +01:00
ece29c3805
(make sure .hex and .lst are updated as well.)
2011-06-11 03:17:38 -07:00
422398e08c
Fix errors in LDSECTIONS refactoring
...
(found during atmega8 testing.)
2011-06-11 03:15:33 -07:00
e28b716f88
Update version to reflect previous edit. Sigh.
2011-06-10 23:16:21 -07:00
6f7687b0f9
Shrink code by using registers for variables "length" and "address"
...
http://code.google.com/p/optiboot/issues/detail?id=33
Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38
Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
2011-06-10 23:02:25 -07:00
00706284de
Add a version number to the optiboot source and binary.
...
http://code.google.com/p/arduino/issues/detail?id=554
end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip. (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)
Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)
Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.
Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section. (This would
need to be done elsewhere as well to handle all bootloader programming
techniques. Notably Arduino's boards.txt
Note that this change does not change the "code" portion of optiboot
at all. The only diffs in the .hex files are the added version word
at the end of flash memory.
2011-06-10 17:47:47 -07:00
d4632cb095
Update shell script makeall
2011-06-10 16:29:34 -07:00
e2812ef91c
This is a relatively significant edit that brings the Arduino copy of
...
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)
This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h
These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
update optiboot to the point of the latest optiboot project sources.
These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
optiboot leaves timer1 configured when starting app, breaks PWM on
pin 9 and 10. (fixed with a workaround in arduino core.)
aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
Support for ATmega8 and mega88.
Fix fuse settings for mega168 _ISP targets
Additional new platforms (mega, sanguino)
http://code.google.com/p/optiboot/issues/detail?id=26
Set R1 to 0 (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
Fails to build correctly for mega88
After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
2011-06-10 16:17:13 -07:00
6840b77643
http://code.google.com/p/arduino/issues/detail?id=517
...
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.
This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
2011-06-09 22:57:27 -07:00
2d2ed324b4
Makefile modification to allow building optiboot in more environments.
...
Allows building within the Arduino Source tree, and within the Arduino
IDE tree, as well as using CrossPack on Mac.
Adds README.TXT to track arduino-specific changes (and documents the
new build options.)
This addresses Arduino issue:
http://code.google.com/p/arduino/issues/detail?id=487
And optiboot issue
http://code.google.com/p/optiboot/issues/detail?id=1
(which can be thought of as a subset of the Arduno issue.)
Note that the binaries produced after these Makefile changes (using any
of the compile environments) are identical to those produced by the
crosspack-20100115 environment on a Mac.
2011-06-09 22:36:05 -07:00
87a04fc064
Added Printable interface class to allow printing of classes such as IPAddress
2011-06-04 09:19:17 -04:00
2711c9910b
Fixing 300 baud communication for serial.
...
Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow.
Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542
http://code.google.com/p/arduino/issues/detail?id=522
2011-05-20 13:29:13 -04:00
db64d2fc32
Fixing 300 baud communication for serial.
...
Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow.
Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542
http://code.google.com/p/arduino/issues/detail?id=522
2011-05-14 12:25:39 -04:00
8c0fdf1e43
Small optimization in HardwareSerial.
...
begin(long) -> begin(unsigned long)
Conflicts:
hardware/arduino/cores/arduino/HardwareSerial.h
2011-05-12 16:58:56 -04:00
1747292711
Optimizing printing of numbers (writing a single buffer).
...
Fix from Bill Greiman via Limor.
2011-05-07 18:17:32 -04:00
cf044cd236
Adding serialEvent(), serialEvent1(), etc.
...
Called from within the serial receive interrupt. These are implemented as an empty weak function in the core that be overridden by the user's sketch.
http://code.google.com/p/arduino/issues/detail?id=263
2011-05-07 13:04:13 -04:00
c740778bf6
Refactoring the UART0 / USART0 receive interrupt handler.
2011-05-07 12:47:43 -04:00
694b8ad392
Changing Serial.flush() to write outgoing data, not drop incoming data.
...
This brings it in line with most other uses of flush(), both in and out of Arduino.
http://code.google.com/p/arduino/issues/detail?id=497
2011-05-07 12:05:27 -04:00
35a78b15ea
Added virtual destructor to Printable, which also requires new and delete operators to be added
2011-04-10 11:34:40 +01:00
facbd279b6
Added a brief explanation of how you'd use Printable
2011-04-02 11:33:27 +01:00
3540d92eb2
Added Printable interface class to allow printing of classes such as IPAddress
2011-04-01 21:10:38 +01:00
17d8fcb46d
Pulled out Server API into the NetServer base class, and a few minor changes to get the NetClient API to work well with the WiFly library
2011-03-31 16:19:17 +01:00
d12fe18480
Restoring concatenation of built-in types with String.
2011-03-31 10:56:14 -04:00
a5f6a42dd7
Pulled out Client API into a base class to allow multiple derived classes to use it, and moved it (plus IPAddress) out of the Ethernet library so that other libraries can find it. First steps in integrating the WiFly code so it's easier to switch between that and Ethernet
2011-03-28 12:08:53 +01:00
0ac0dcf158
Adding F("foo") syntax for flash strings.
2011-03-27 15:06:20 -04:00
e3c7a54725
String: removing implicit numeric conversions and new approach to "if (s)".
...
This makes explicit the String constructors that take numeric types and chars and removes the versions of concat() and operator=() and operator+() that accept numberic types.
It also replaces the operator bool() with a operator that converts to a function pointer. This allows for uses like "if (s)" but not "s + 123". See: http://www.artima.com/cppsource/safebool.html . This allowed removing the disambiguating operator+() functions and relying solely on StringSumHelper and anonymous temporaries once again.
Also, now treating unsigned char's like int when constructing Strings from them, i.e. String(byte(65)) is now "65" not "A". This is consistent with the new behavior of Serial.print(byte).
2011-03-26 18:52:54 -04:00
efae89ea0e
Commenting String API behavior.
2011-03-23 22:42:05 -04:00
7d4073ef73
Return an invalid string (not a partial one) when operator+() fails.
2011-03-19 11:14:17 -04:00
d3a5532d13
Starting to distinguish between empty strings and invalid (null) ones.
2011-03-18 21:45:27 -04:00
6f3ceb399d
Protecting String copy() and move().
2011-03-13 19:39:04 -04:00
488e672ea0
Adding additional String + operators for disambiguation.
...
The operator bool() means that you could implicitly convert a String to a bool and then add it to it an int, for example. Which means our operator+ has to match exactly or it will be ambiguous.
2011-03-13 19:31:10 -04:00
cc24d41b74
Moving move() to __GXX_EXPERIMENTAL_CXX0X__ only, adding operator bool().
2011-03-13 16:46:06 -04:00
f5f2e09636
Modifying String.concat() to return success or failure, not this.
...
Which means you can't chain multiple concat() calls together, but you can check if they succeeded or not.
2011-03-12 14:03:34 -05:00
6727c8a831
Don't return the string when modifying its value.
...
Changing toLowerCase(), toUpperCase(), trim() and replace() to return void instead of a reference to the string that's just been changed. That way, it's clear that the functions modify the string they've been called on.
2011-03-11 18:54:58 -05:00
7fa866ffea
Renaming append() back to concat().
2011-03-11 18:04:31 -05:00
9139094c36
Removing F("string") syntax for now.
...
We should probably add something like this back in later, but I want to do one thing at a time. This removes the __FlashStringHelper class as well.
2011-03-11 18:01:40 -05:00
1d9bbc01e3
Rewrite of the String class by Paul Stoffregen.
...
http://www.pjrc.com/teensy/string_class_experimental.html
2011-03-11 17:56:10 -05:00
6b890f8c7d
Fixing typo in boards.txt.
2011-03-09 21:22:04 -05:00
af841d166d
Flushing outgoing and incoming data in Serial.end().
...
That is, waiting for outgoing data to transmit and dropping any received data.
2011-03-06 12:20:42 -05:00
1bef2990b6
Fixing race condition in Serial write (Brian Cook).
2011-03-06 11:47:18 -05:00
10ecfa8bea
Moving TCCR1B reset into #ifdef check.
2011-03-06 11:29:35 -05:00
7f0cc2111c
Implemented serial transmit buffering.
...
Now Serial.write() places characters in the transmit buffer, and the data register empty interrupt reads and transmit them. Based loosely on the implementation here: ftp://wookey.org.uk/arduino.
http://code.google.com/p/arduino/issues/detail?id=262
2011-03-05 14:17:26 -05:00
19597b1d0b
Factoring pin definitions out of the core.
...
That is, there's now a pins/ directory in a platform, which includes multiple directories, each of which has its own pins_arduino.h. The boards.txt gets a new preferences, <BOARD>.build.pins, whose values is a sub-directory of the pins/ directory (possibly with a "platform:" prefix). That sub-directory is then placed in the include path during compilation.
2011-03-04 21:05:05 -05:00
afb60e1163
Moving all pin definitions into pins_arduino.h.
...
This is a step towards providing portability across AVR's by simply including an appropriate header file.
2011-03-03 23:54:33 -05:00
d59fcb8eed
Fixing warnings (David H. Lynch Jr).
2011-03-03 22:56:20 -05:00
5234a96b34
Rearranging internal #defines in headers.
2011-03-03 18:57:05 -05:00
ba14230883
Removing optimized digitalWrite(), digitalRead(), pinMode().
2011-03-03 18:46:45 -05:00
4ea2d99c1a
Re-arranging header files and small fixes to optimized core functions.
2011-03-02 23:05:25 -05:00
bb7a044884
Moving wiring.h contents into Arduino.h.
2011-03-01 20:00:16 -05:00
d05e4021d0
Renamed WProgram.h to Arduino.h.
2011-03-01 19:52:13 -05:00
97abbd7a31
Removing BYTE keyword (use Serial.write() instead).
2011-02-26 13:58:03 -05:00
13e3ba87e3
Small optimization in HardwareSerial.
...
begin(long) -> begin(unsigned long)
2011-02-25 18:36:46 -05:00
d15e9aa98a
Merge branch 'master' into new-extension
2011-02-22 22:02:22 -05:00
d180ad18a9
Revert "Changes to optimized digitalWrte(), etc."
...
This reverts commit aa1f1cbda9
2011-02-18 10:41:29 -05:00
956a4f2024
Revert "Adding noAnalogWrite() function to disable PWM."
...
This reverts commit 38d4a34fec
2011-02-18 10:40:56 -05:00
38d4a34fec
Adding noAnalogWrite() function to disable PWM.
...
Also, removing the inline version of digitalPinToTimer() (since we're not optimizing the functions that use it anyway). The noAnalogWrite() function is in wiring_analog.c, deriving from the previous turnOffPWM() which has moved from wiring_digital.c.
http://code.google.com/p/arduino/issues/detail?id=476
2011-02-12 14:47:08 -05:00
aa1f1cbda9
Changes to optimized digitalWrte(), etc.
...
Factoring out the implementation of digitalWrite(), digitalRead(), and pinMode() into macros that can either be inlined (for constant pin numbers) or executed within a function (non-constant pins). Removing testing for timers on pins in digitalWrite(), digitalRead(), and pinMode(). Moving pin to port macros from pins_arduino.h to wiring.h.
2011-02-11 19:29:46 -05:00
9dccd634c5
Optimized digitalWrite(), etc. from Alvaro Lopez.
2011-02-11 17:53:24 -05:00
94168bd0f4
Fix to optiboot infinite loop problem.
...
Explicitly setting R1 to 0 so that the watchdog timer is properly initializing, preventing it from timing out and resetting the processor.
http://code.google.com/p/optiboot/issues/detail?id=26
http://code.google.com/p/arduino/issues/detail?id=446
2011-01-15 13:29:08 +00:00
63f4021447
Changing String append to use realloc(); thanks to Paul Stoffregen.
...
http://code.google.com/p/arduino/issues/detail?id=332
2010-12-11 15:22:07 -05:00
d7ecd5e4e8
Minor ATmega8U2 firmware update and new .hex files.
...
Adding LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 to makefile to save space, updating release number to 0x0001.
2010-12-04 14:28:56 -05:00
f92b235be2
Minor bug fixes to the 8U2 USB-to-serial firmware.
2010-12-04 13:50:27 -05:00
32388c908f
Replacing custom String.toInt() function with a call to atol().
2010-12-03 23:12:41 -05:00
dce5e09e69
Fixing Linux UNO serial bug (thanks to Dean Camera).
...
Enabling INTERRUPT_CONTROL_ENDPOINT in the makefile so we don't miss control messages from Linux. Also deleted two unused USB events to save a few bytes of space (the Mega 2560 .hex is now exactly 4096 bytes).
2010-11-29 23:26:54 -05:00
d98d31eb1a
Redoing 448222e4b6 without all the extra files.
...
Adds toInt() to String, WCharacter.h (from Wiring), and an SD Datalogger example.
2010-11-29 15:20:30 -05:00
920212ee05
Revert "added toInt() function to WString".
...
This reverts commit 448222e4b6
2010-11-29 15:14:10 -05:00
448222e4b6
added toInt() function to WString
2010-11-29 11:31:00 -05:00
Zach Eveland
David A. Mellis
Cristian Maglie
WestfW
Santiago Reig
amcewen
Tom Igoe