Centrally decide which hardware UARTS are available

Before, this decision was made in few different places, based on
sometimes different register defines.

Now, HardwareSerial.h decides wich UARTS are available, defines
USE_HWSERIALn macros and HardwareSerial.cpp simply checks these macros
(together with some #ifs to decide which registers to use for UART 0).
For consistency, USBAPI.h also defines a HAVE_CDCSERIAL macro when
applicable.

For supported targets, this should change any behaviour. For unsupported
targets, the error messages might subtly change because some checks are
moved or changed.

Additionally, this moves the USBAPI.h include form HardareSerial.h into
Arduino.h and raises an error when both CDC serial and UART0 are
available (previously this would silently use UART0 instead of CDC, but
there is not currently any Atmel chip available for which this would
occur).
This commit is contained in:
Matthijs Kooijman 2013-12-01 17:21:54 +01:00 committed by Cristian Maglie
parent f1cd85da7a
commit 99f7ef7c67
4 changed files with 35 additions and 43 deletions

View File

@ -200,6 +200,10 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
#include "WCharacter.h"
#include "WString.h"
#include "HardwareSerial.h"
#include "USBAPI.h"
#if defined(HAVE_HWSERIAL0) && defined(HAVE_CDCSERIAL)
#error "Targets with both UART0 and CDC serial not supported"
#endif
uint16_t makeWord(uint16_t w);
uint16_t makeWord(byte h, byte l);

View File

@ -28,11 +28,11 @@
#include "Arduino.h"
#include "wiring_private.h"
#include "HardwareSerial.h"
// this next line disables the entire HardwareSerial.cpp,
// this is so I can support Attiny series and any other chip without a uart
#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
#include "HardwareSerial.h"
#if defined(HAVE_HWSERIAL0) || defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3)
// Ensure that the various bit positions we use are available with a 0
// postfix, so we can always use the values for UART0 for all UARTs. The
@ -84,53 +84,44 @@
#error "Not all bit positions for UART3 are the same as for UART0"
#endif
#if !defined(USART0_RX_vect) && defined(USART1_RX_vect)
// do nothing - on the 32u4 the first USART is USART1
#else
#if !defined(USART_RX_vect) && !defined(USART0_RX_vect) && \
!defined(USART_RXC_vect)
#error "Don't know what the Data Received vector is called for the first UART"
#else
#if defined(HAVE_HWSERIAL0)
void serialEvent() __attribute__((weak));
void serialEvent() {}
#define serialEvent_implemented
#if defined(USART_RX_vect)
ISR(USART_RX_vect)
#elif defined(USART0_RX_vect)
ISR(USART0_RX_vect)
#elif defined(USART_RXC_vect)
ISR(USART_RXC_vect) // ATmega8
#else
#error "Don't know what the Data Received vector is called for the first UART"
#endif
{
Serial._rx_complete_irq();
}
#endif
#endif
#if defined(USART1_RX_vect)
#if defined(HAVE_HWSERIAL1)
void serialEvent1() __attribute__((weak));
void serialEvent1() {}
#define serialEvent1_implemented
ISR(USART1_RX_vect)
{
Serial1._rx_complete_irq();
}
#endif
#if defined(USART2_RX_vect) && defined(UDR2)
#if defined(HAVE_HWSERIAL2)
void serialEvent2() __attribute__((weak));
void serialEvent2() {}
#define serialEvent2_implemented
ISR(USART2_RX_vect)
{
Serial2._rx_complete_irq();
}
#endif
#if defined(USART3_RX_vect) && defined(UDR3)
#if defined(HAVE_HWSERIAL3)
void serialEvent3() __attribute__((weak));
void serialEvent3() {}
#define serialEvent3_implemented
ISR(USART3_RX_vect)
{
Serial3._rx_complete_irq();
@ -139,27 +130,22 @@
void serialEventRun(void)
{
#ifdef serialEvent_implemented
#if defined(HAVE_HWSERIAL0)
if (Serial.available()) serialEvent();
#endif
#ifdef serialEvent1_implemented
#if defined(HAVE_HWSERIAL1)
if (Serial1.available()) serialEvent1();
#endif
#ifdef serialEvent2_implemented
#if defined(HAVE_HWSERIAL2)
if (Serial2.available()) serialEvent2();
#endif
#ifdef serialEvent3_implemented
#if defined(HAVE_HWSERIAL3)
if (Serial3.available()) serialEvent3();
#endif
}
#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect)
// do nothing - on the 32u4 the first USART is USART1
#else
#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect)
#error "Don't know what the Data Register Empty vector is called for the first UART"
#else
#if defined(HAVE_HWSERIAL0)
#if defined(UART0_UDRE_vect)
ISR(UART0_UDRE_vect)
#elif defined(UART_UDRE_vect)
@ -168,28 +154,29 @@ ISR(UART_UDRE_vect)
ISR(USART0_UDRE_vect)
#elif defined(USART_UDRE_vect)
ISR(USART_UDRE_vect)
#else
#error "Don't know what the Data Register Empty vector is called for the first UART"
#endif
{
Serial._tx_udr_empty_irq();
}
#endif
#endif
#ifdef USART1_UDRE_vect
#if defined(HAVE_HWSERIAL1)
ISR(USART1_UDRE_vect)
{
Serial1._tx_udr_empty_irq();
}
#endif
#ifdef USART2_UDRE_vect
#if defined(HAVE_HWSERIAL2)
ISR(USART2_UDRE_vect)
{
Serial2._tx_udr_empty_irq();
}
#endif
#ifdef USART3_UDRE_vect
#if defined(HAVE_HWSERIAL3)
ISR(USART3_UDRE_vect)
{
Serial3._tx_udr_empty_irq();
@ -386,23 +373,21 @@ size_t HardwareSerial::write(uint8_t c)
// Preinstantiate Objects //////////////////////////////////////////////////////
#if defined(HAVE_HWSERIAL0)
#if defined(UBRRH) && defined(UBRRL)
HardwareSerial Serial(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
#elif defined(UBRR0H) && defined(UBRR0L)
HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0);
#elif defined(USBCON)
// do nothing - Serial object and buffers are initialized in CDC code
#else
#error no serial port defined (port 0)
HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0);
#endif
#endif
#if defined(UBRR1H)
#if defined(HAVE_HWSERIAL1)
HardwareSerial Serial1(&UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1);
#endif
#if defined(UBRR2H)
#if defined(HAVE_HWSERIAL2)
HardwareSerial Serial2(&UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2);
#endif
#if defined(UBRR3H)
#if defined(HAVE_HWSERIAL3)
HardwareSerial Serial3(&UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3);
#endif

View File

@ -113,18 +113,19 @@ class HardwareSerial : public Stream
#if defined(UBRRH) || defined(UBRR0H)
extern HardwareSerial Serial;
#elif defined(USBCON)
#include "USBAPI.h"
// extern HardwareSerial Serial_;
#define HAVE_HWSERIAL0
#endif
#if defined(UBRR1H)
extern HardwareSerial Serial1;
#define HAVE_HWSERIAL1
#endif
#if defined(UBRR2H)
extern HardwareSerial Serial2;
#define HAVE_HWSERIAL2
#endif
#if defined(UBRR3H)
extern HardwareSerial Serial3;
#define HAVE_HWSERIAL3
#endif
extern void serialEventRun(void) __attribute__((weak));

View File

@ -55,6 +55,8 @@ public:
};
extern Serial_ Serial;
#define HAVE_CDCSERIAL
//================================================================================
//================================================================================
// Mouse