Zach Eveland b28e6c2f9c Leonardo bootloader jumps straight to sketch for a power-on reset. ... Disconnect programmer after burning bootloader to get the full effect. ICSP and JTAG programmers do a hardware reset after any reset condition, confusing the firmware a little.		2012-02-14 09:59:48 -05:00
..
atmega	Adding ATmega328 bootloader for the Pro and Pro Mini running at 8 MHz (3.3V). Uses the USART0 double speed mode, which according to Nathan from Sparkfun, is necessary to achieve reliable communication at 57600 baud.	2009-05-08 11:05:41 +00:00
atmega8	Moving bootloaders into the hardware/bootloaders directory.	2007-10-06 13:28:43 +00:00
bt	Adding ATmega328 version of the Arduino BT bootloader, along with a Makefile for building it.	2010-08-07 19:48:59 +00:00
caterina	made Leonardo and Micro bootloader PIDs same as sketch PIDs	2012-01-10 21:23:01 -05:00
caterina_LUFA	Leonardo bootloader jumps straight to sketch for a power-on reset.	2012-02-14 09:59:48 -05:00
lilypad	Adding LilyPad bootloader and adding LilyPad to board definition file.	2007-10-09 22:46:09 +00:00
optiboot	Correcting Arduino Mini w/ ATmega328 bootloader file and fuses (untested).	2011-11-25 19:26:01 -06:00
stk500v2	Revert "Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot"	2011-10-27 11:45:13 -04:00