Zach Eveland 083f7c8891 bugfix for Caterina not starting sketch if "verify upload" turned off in IDE. ... Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it?		2012-03-14 17:48:11 -04:00
..
atmega	Adding ATmega328 bootloader for the Pro and Pro Mini running at 8 MHz (3.3V). Uses the USART0 double speed mode, which according to Nathan from Sparkfun, is necessary to achieve reliable communication at 57600 baud.	2009-05-08 11:05:41 +00:00
atmega8	Moving bootloaders into the hardware/bootloaders directory.	2007-10-06 13:28:43 +00:00
bt	Adding ATmega328 version of the Arduino BT bootloader, along with a Makefile for building it.	2010-08-07 19:48:59 +00:00
caterina	bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.	2012-03-14 17:48:11 -04:00
lilypad	Adding LilyPad bootloader and adding LilyPad to board definition file.	2007-10-09 22:46:09 +00:00
optiboot	Correcting Arduino Mini w/ ATmega328 bootloader file and fuses (untested).	2011-11-25 19:26:01 -06:00
stk500v2	Revert "Merge branch 'master' of github.com:arduino/Arduino into diskloader_reboot"	2011-10-27 11:45:13 -04:00