968781ab8c
Updated HAL library with clean set of files from the cube (very few changes)
2016-06-21 17:10:13 +10:00
22f69cc8f2
Remove non working DMA example
2016-06-21 17:00:13 +10:00
6fbdab0b94
Added missing files
2016-06-21 16:58:55 +10:00
772174fed1
Updated HAL library with the latest files exported from the Cube. Also enabled as many interfaces as possible. Note CAN bus interferes with USB, so has been commented out in stm32f1xx_hal_conf.h
2016-06-21 15:18:28 +10:00
d62cf1a35a
Added experimental HAL library
2016-06-21 11:33:02 +10:00
761eada3a2
Merge branch 'master' into development
2016-06-06 10:21:38 +10:00
0cebedb59e
Added Etheret_STM by Vassilis (at his request, as copy of https://github.com/Serasidis/Ethernet_STM )
2016-06-06 10:20:55 +10:00
f221430cfa
Merge branch 'master' into development
2016-05-13 14:48:28 +10:00
71e8282fc1
Renamed MrBrunetteExamples to General examples, and remoted boards.txt
2016-05-13 14:40:06 +10:00
cc639cd9cb
Moved examples to new dummy library item
2016-05-13 14:39:10 +10:00
4ce00387d8
Add dummy / shell library to allow IDE access to the examples
2016-05-13 14:38:34 +10:00
c2243ff004
Removed stm32f2 files and F1 unused support files
2016-05-08 14:34:09 +10:00
e69f84a88a
Attempt to remove TFT_ILI9163C submodule
2016-05-05 21:26:44 +10:00
c4d665155a
Attempt to remove Ether_STM submodule
2016-05-05 21:25:29 +10:00
76157ad751
Updated 'category' in library.properties files, to shop the IDE complaining that this key is missing
2016-05-03 20:44:18 +10:00
a1498ee778
Update Adafruit_ILI9341_STM.cpp
2016-04-23 06:05:38 +03:00
29a5400188
Bugfix Adafruit_ILI9341_STM
...
readcommand8() toggles _sclk, but when using hwSPI it's set to 0, ie. it's toggling GPIO0, which it obviously shouldn't be doing. Also, when SPI-transactions had been enabled the SPI-bus speed was set to only 8MHz -- now we set it to 36MHz on STM32F1.
2016-04-22 20:36:38 +03:00
ba5d4058f1
Merge branch 'development'
2016-02-28 14:52:14 +11:00
4790010b78
Remove libraries/LiquidCrystal_I2C/
...
closes rogerclarkmelbourne/Arduino_STM32#158
2016-02-03 20:29:49 -06:00
114861b36c
Touch screen library for STM32F1, based on XPT2046 touch controller.
...
The XPT2046 touch controller can be found on the new 2.4" ILI9341 SPI
LCDs.
2015-12-03 20:38:20 +02:00
a7e909a6de
Merge branch 'master' into development
2015-11-15 13:00:39 +11:00
0469149581
Merge pull request #119 from jaretburkett/master
...
Added Touchscreen Library
2015-11-15 10:27:08 +11:00
91014b40a8
fixes #125
2015-11-05 16:27:24 +01:00
b81d7b7334
removed unwanted dashes which caused compiling error
2015-11-04 08:08:21 +01:00
3ef9112870
additional function updateSettings() to replace the call to begin().
...
removes unwanted glitches before getting SCK active caused by setting parameters after begin().
2015-10-26 12:58:22 +01:00
f87b4adda8
additional function updateSettings() to replace the call to begin().
...
removes unwanted glitches before getting SCK active caused by setting parameters after begin().
2015-10-26 12:52:45 +01:00
37fbb642ea
added part from SD fat lib which enables SPI 2 device write access
...
taken from SdSpiSTM32F1.cpp - Victor's lib, and adapted to support device selection.
To be checked with other libs which are using the SPI lib.
2015-10-26 11:36:24 +01:00
536cec8f5d
Various changes to boards.txt and some libraries, so that things will compile under IDE 1.6.6 Note. There are still loads of warnings when you compile - which look like they may be caused by the IDE using a new version of GCC, but at least it now compiles
2015-10-09 17:18:38 +11:00
7f23ee129c
Fixed Touchscreen Lib
...
Changed example to use the Touchscreen Library that has STM32 support.
2015-09-26 09:21:41 -05:00
664c8c5981
Added Adafruit Touchscreen Library
...
Added support for STM32 to the Adafruit Resistive Touchscreen library.
2015-09-26 09:13:32 -05:00
2e9b4f3955
Merge pull request #110 from Serasidis/patch-2
...
Serasidis_VS1003B_STM - Updated the example for using it with the new one SPI library.
2015-09-09 21:13:52 +10:00
89a5a661f3
Updated the example for using it with the new one SPI library.
2015-09-09 12:33:42 +03:00
0b9e84d8fa
Updated the example for using it with the new one SPI library.
2015-09-09 12:32:00 +03:00
88d2457f30
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
2015-09-06 07:51:40 +10:00
fea15b00d6
VS1053B MIDI example is added
2015-08-29 23:08:22 +03:00
461b86207e
Added Serial.begin(115200) to both examples so that they work on non-bootloader boards
2015-08-06 17:42:04 +10:00
fa94d9f143
Merge branch 'master' of https://github.com/fergul/Arduino_STM32 into fergul-master
2015-08-06 17:32:13 +10:00
ab37760af7
Oops. Failed to save the revised definition for SOFT_STANARD Wire speed which should have been part of the previous commit
2015-08-03 09:48:50 +10:00
885d3f2c5c
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-08-03 09:46:33 +10:00
d3bd109013
Changed default speed on Wire library to 100kpbs (same as AVR Arduinos), thanks to @fredbox on the forum for the delay values to achieve 100kbps
2015-08-03 09:45:57 +10:00
572b311c3a
Fixed formatting to match existing style + Hardwire comments
2015-08-01 19:09:43 +01:00
61b212d42b
Added i2c_scanner examples to Wire library for testing HWire and Wire
2015-08-01 19:04:18 +01:00
3b8b7a79f4
Bugfix for HardWire/I2C + configured/compiled dfu-util to work on Linux again
...
- Fixed 0 byte payload bug, stopping HardWire from sending only addresses to scan for devices
- Fixed I2C bug accessing wrong status register for error flags
- Improved Hardwire endTransmission() return flags to correspond with the actual I2C failure status
- Removed dos endings from dfu-util autogen script breaking compilation
2015-08-01 18:58:14 +01:00
0ec837f08c
Fix for uninitialised vars in dmaTransfer and dmaSend (as detailed by victor_pv)
2015-07-28 12:00:16 +10:00
07ba8f279a
Updaded SPI with update from VictorPV
2015-07-26 04:58:12 +10:00
fc50831843
Continued with SPI setModule - still doesnt work when I tried setModule(2);
2015-07-08 11:14:57 +10:00
20a9214291
Some fixes. Works for SD example SPI 1, not tested with anything else. setModule not tested
2015-07-07 20:59:33 +10:00
2e13a1d57e
Initial attempt at SPI setModule - but it doesn't seem to work for SPI2 etc, even when not using setModule to select the SPI channel, when I tested with a VS1053 board attached to SPI2 and SD on SPI1
2015-07-07 07:27:09 +10:00
1e4fdf743a
FLAC decoder patch
...
By uncommenting "#define USEFLAC" in VS1003_STM.h the FLAC patch will be
loaded at begin time.
2015-07-01 20:16:27 +07:00
501da92986
Added a line in SPI.cpp to default the bitOrder to MSBFIRST
2015-06-25 09:36:23 +10:00
Roger Clark
WereCatf
Dan Drown
Vassilis Serasidis
Jean-Claude Wippler
stevstrong
rogerclarkmelbourne
Jaret Burkett
Fergus
Teguh Sobirin