197844ddf3
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/development'
2015-11-22 18:14:51 +01:00
acf956a3e7
Compiled new version of stm32flash for OSX, with changes from @jcw
2015-11-21 19:42:53 +11:00
d0ed1941bb
Merge branch 'master' into development
2015-11-20 20:27:18 +11:00
3e41a7458c
remove the cflag check
2015-11-15 13:51:32 +01:00
44af152967
Partial reversion of maple_upload
...
Change at line 20 unnecessary.
2015-10-30 13:56:36 -05:00
5a1944c795
Fix case of spaces in path to linux tools directory
2015-10-30 13:21:41 -05:00
bd6d3b5092
Fixed issue in linux maple_upload.sh caused by paths with spaces in them
2015-10-29 19:55:47 +11:00
47e3050025
Added empty board.txt files to drivers, examples and tools, to stop the IDE warning messages (as these folders don't contain cores
2015-10-27 10:48:08 +11:00
f3c46b0842
Fixed OSX upload reset issue by appending -R to the dfu upload command in the macosx maple_upload script
2015-08-17 08:45:37 +10:00
5bc3de4331
Fixed DFU upload reset issue by appending -R to the linux maple_upload script
2015-08-17 08:44:32 +10:00
3b8b7a79f4
Bugfix for HardWire/I2C + configured/compiled dfu-util to work on Linux again
...
- Fixed 0 byte payload bug, stopping HardWire from sending only addresses to scan for devices
- Fixed I2C bug accessing wrong status register for error flags
- Improved Hardwire endTransmission() return flags to correspond with the actual I2C failure status
- Removed dos endings from dfu-util autogen script breaking compilation
2015-08-01 18:58:14 +01:00
ce70ae4fce
Added source to maple_loader.jar
2015-07-20 06:38:38 +10:00
8ab4734573
Add cached dfu-util sources, as the original remote repo is no longer available for use as the source to the dfu-util folder as a submodule
2015-07-09 20:15:54 +10:00
9056c63977
Removed submodule dfu-util
2015-07-09 20:09:11 +10:00
e0d6307685
Built Linux binary and also changed printed message to indicate this is a special version built for Arduino STM32
2015-07-08 19:48:57 +10:00
176db5f9d0
Fix issue on OSX (and other platforms) where stm32flash only works if the serial device name starts with /dev/tty, as on OSX some serial devices start with /dev/cu. Also corrected mistake about .a file in stm32 parsers folder, and hopefully removed the .a file from source control
2015-07-08 15:14:25 +10:00
cd9e17deea
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_stm32
2015-07-06 09:23:37 +10:00
58a5799ace
Added linux install file missing after previous name change to this file
2015-07-06 09:23:01 +10:00
8c327aca05
Added OSX DFU binaries and changed the OSX maple-upload script to use them. (This saves users having to install dfu-util themselves, e.g. via Homebrew
2015-07-04 10:15:44 +10:00
70403109c5
Updated Linux install script so that it also adds the current user to the dialout group. Also removed duplicate copy of the Linux install script from drivers/linux
2015-07-03 21:31:50 +10:00
3b2c87de5a
Updated linux tools to contain upload-reset (bin) utility, and modified maple-upload script to use this utility to reset the bootloader prior to upload. Also changed maple-upload so that it uses the pre-compiled dfu-util binary that is now part of the repo
2015-06-28 11:06:00 +10:00
0ff9438aa1
Added osx upload-reset binary omitted from last commit
2015-06-16 21:25:40 +10:00
a25bb2b50b
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-06-16 21:23:52 +10:00
a7244e0e89
Added upload-reset.c source. Added upload-reset OSX binary, and modified maple-upload script to use upload-reset
2015-06-16 21:23:43 +10:00
53e4329a75
add dfuse_addr arguments option for tools/macosx/maple_upload
2015-05-31 13:22:21 -04:00
44bfd8ae54
fix SetupClock168() for Netduino2Plus + add STM32Stamp/Netduino2Plus boards + add dfuse_addr in upload
2015-05-28 17:20:49 -04:00
8540c26429
Changed Windows STlink upload to use STM's own STLink CLI Exe as this supports more STLink hardware than Texane-STLink and some users had problems with Texane on F4 and F3 boards
2015-05-26 14:09:46 +10:00
973fa0268e
Added Black Magic Probe upload support for C series boards, Note Windows BAT file has not been tested yet
2015-05-19 21:44:10 +10:00
f90929bfa8
Added dfu-util src as a sub module, also added compiled dfu-util files to tools/linux and added script to set udev rules, which I took from the old Maple IDE
2015-05-10 20:26:17 +10:00
766f9f37e1
Fixed issue with empty line at top of linux stlink_upload script (issue #48 )
2015-05-05 21:39:21 +10:00
5916e8c3be
Updated linux stlink_upload
2015-05-05 10:06:31 +10:00
e7e552fef6
Accidenly updated the linux serial_upload instead of stlink upload, so I have re-instated its contents
2015-05-05 10:05:22 +10:00
666b5b3da3
Updated stlink_upload script for Linux to enhanced code from @ahull
2015-05-05 08:13:32 +10:00
4f9a83e08b
added linux32 versions of stm32flash and stlink binaries and used scripts from OSX for these in linux as the scripts are identical
2015-05-02 19:09:45 +10:00
3d17dbce37
Added Windows binaries for Texane-stlink, and changed Windows stlink ulload bat file to use the new files. Tested and working on STM32F103C8 using 'STM32 to Flash (no bootloder)' board type
2015-04-29 20:52:38 +10:00
bbf58007fa
Removed .o and .a files from stm32flash src that should not have been tracked in the first place
2015-04-18 11:25:09 +10:00
1faf1d6b0d
Using modified version of latest fork of stm32flash
2015-04-18 11:24:00 +10:00
0f78542eef
Fixed issue with stm32flash for Windows, where double digit COM ports didn't work e.g COM10 would not work
2015-04-18 08:08:59 +10:00
6df2be1012
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-04-12 10:28:56 +10:00
4a3da022b8
Updated platform.txt and added platform rewrite keys file to aid operation with IDE 1.6.2 onwards
2015-04-12 10:05:32 +10:00
7abe8ebdbf
Updated linux upload router with version from @ahull
2015-04-07 08:50:06 +10:00
8b3b13680e
Attempted to set execut permissions on upload_router on linux, from OSX
2015-04-07 08:17:21 +10:00
0e318d746d
Added texane-stlink to tools src folder. Note. This was easier than moving it from the old location under macosx. I will remove the one under macosx once the new one is definately committed
2015-04-07 08:15:22 +10:00
0e879acb54
Moved stm32flash source to a separate src folder rather than being inside tools/macosx
2015-04-07 08:06:37 +10:00
353b7bf995
Added new / recompiled stm32flash.exe for windows using MinGW so that Windows versions now supports the same processors as the OSX and Linux version (Specifically some STM32F103C8 devices)
2015-04-02 07:24:20 +11:00
d7cf10c6ee
Added linux upload_router script. Please note, Linux users may need to set execute permissions on this file. I can't however do this when commiting the file from my Windows machine
2015-03-09 01:52:39 +11:00
d8f7103e1c
Added STLink to upload_router.bat and changed STM32 to Flash board type so that a new menu of UploadMethod allows selection of upload via Serial or STLink
2015-02-03 09:55:13 +11:00
59b3c0194f
Improved mac OSX maple uploads, with the help of Tim Schuerewegen, by resetting using tty to reset the Maple via the com port and also added the -R option to dfu-util to run after upload
2015-01-28 20:29:27 +11:00
26e298dcf4
Added texan/stlink as a sub repo to macosx for st-link support. Note, there may be a better location for this as its cross platform source and could be used for Linux as well
2015-01-22 16:05:31 +11:00
7e1155125c
Replace st-link OSX binaries for ones that work on 10.7 and fixed issue in OSX stlink_upload bash script
2015-01-22 15:48:22 +11:00
stevstrong
Roger Clark
Roger Clark
Jean-Claude Wippler
David Brunell
rogerclarkmelbourne
Fergus
Martin Ayotte