8d9e2f24b6
Suppressing 'warning: unused parameter ... [-Wunused-parameter]'
2017-11-15 23:19:31 +01:00
fd00f02072
Update BlinkNcount.ino to use LED_BUILTIN
2017-11-10 04:10:31 -05:00
cb901b4e4f
Added CPU Speed menu to all boards except Nucleo RB, with additional entry for 128Mhz Turbo - NO USB. Note only tested on the Blue Pill
2017-07-30 17:43:40 +10:00
f7a576f2e0
Fixed issue with PB10 being set to OUTPUT for use as a USB Disconnect control on boards which do not have the additional USB disconnect hardware e.g. the Blue Pill. Note. Some variants seem to have the disconnect control on another pin, so I did not change those in case they were actually used
2017-06-25 13:08:30 +10:00
f2c2323afd
Changed board variants to use calculate value from F_CPU for CYCLES_PER_MICROSECOND
2017-05-26 16:22:16 +10:00
c3d9d1bc1e
Added define for LED_BUILTIN to Maple mini and generic STM32F103C (on PC13 to suit the BluePill)
2017-05-25 18:16:47 +10:00
7dcbbc85b0
Fix bug USB divider for 48Mhz operation. Also added support for 48Mhz to Maple mini and Generic F103C (Note. There is a bug in tone() at 48Mhz)
2017-01-09 20:27:07 +11:00
2e54594f46
Added #define LED_BUILTIN to Maple mini and generic_STM32F103C
2016-12-02 21:24:13 +11:00
9147a461e7
Merge branch 'master' of https://github.com/bubulindo/Arduino_STM32 into bubulindo-master
2016-09-26 10:42:42 +10:00
0b34af3b6a
Minor bug fixes now that I have a ZET6
...
While using a different board, I realized that I did not configure the
ADC on all variants and there is a minor bug on the irq_num for
advanced 103 devices.
2016-09-25 13:14:12 +01:00
896cb2d3c7
Increase generic boards USB reset delay to fix issue with newer PC's
2016-05-15 15:16:27 +10:00
0909f4c20d
Changed defines for MOSI, MISO etc into const static vars, to address compatibility issues
2016-05-03 20:23:51 +10:00
88d2457f30
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
2015-09-06 07:51:40 +10:00
6b6ab7dab5
Implemented PIN MAP in flash for all other variants
2015-09-01 19:58:39 +10:00
7d45f68fde
Update PIN_MAP to allow PWM on PB9
2015-07-09 12:47:33 +12:00
a1fdae2817
Made changes for Nucleo F103RB and Generic STM32F103C . Note this commit only works with these 2 boards, on all others Serial will not compile
2015-05-28 17:38:59 +10:00
7fe2e7806a
Disabled generic bootloader USB reset
2015-05-24 09:15:43 +10:00
6a2e51585d
Added DFU upload options for all generic boards. Note, Its not possible to set the correct memort size in the linker file for DFU uploads, so its always set as having the max ram and rom for the series in question. So beware using this if you are maxing out the RAM or Flash (which seems highly unlikely!)
2015-05-22 21:07:57 +10:00
cbc78edce3
Include VictorPV's usb reset code to all generic board when SERIAL_USB is enabled ( by the defined in boards.txt)
2015-05-16 21:54:10 +10:00
e3d460d566
Added STM32F103V series boards from files supplied by VictorPV (after updating to latest changes to -DSERIAL_USB etc) , also added victors experimental USB reset code - which partially works !
2015-05-13 20:33:30 +10:00
fddefc13a9
Separated USB Serial functionality definitions from the BOOTLOADER_maple definition, so that generic boards can use USB serial without needing to have the bootloader and the disconnect hardware. NOTE. I have only tested the SERIAL_USB on the F103ZE board, it may not work on other generic boards
2015-04-25 15:28:45 +10:00
badf7057f0
Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board
2015-04-25 10:41:27 +10:00
347cee0d4e
added comment to generic stm32f103c board.h
2015-04-15 09:40:54 +10:00
e8aa9b0620
Changed generic stm32f103c board definitions to tidy up the order of the PIN MAP
2015-04-15 09:21:35 +10:00
6fec429e99
Made new generic STM32F103C board variant based on Maple mini. This is a work in process. It seems to work, but needs more tidying up ;-)
2015-04-14 20:18:37 +10:00
lacklustrlabs
LightningStalker
Roger Clark
Bubulindo
Colin
rogerclarkmelbourne