fd224ab288
Added working version of RTClock, thanks to Ray and @ahull etc
2015-05-23 11:19:16 +10:00
060dc414b9
Still part of the RTOS commit
2015-05-21 23:36:16 -05:00
377217c9f5
CoOS 1.12 and 1.1.6 (latest), and FreeRTOS 8.2.1
...
Ported FreeRTOS 8.2.1 by finding the changes in the 7.0.1 version and
carrying them over. Then found an almost working port of CoOS, and
corrected it to work, and then carried the changes to 1.1.6 Tested all
of them with USBSerial, GPIO, SPI, DMA and a DMA ISR all working fine.
Similar examples ported to all of them.
2015-05-21 22:44:41 -05:00
e13b9a0709
SPI DMA functions.
...
Adds 6 new functions: DMA Transfer, DMA 8bit send, DMA 16bit send, write
16 bit int. and mode change to change between 8bit and 16 bit transfer.
2015-05-21 22:35:40 -05:00
89d3262d17
Movred FreeRTOS from untested into the libraries folder now its been tested by @victor_pv
2015-05-19 07:45:47 +10:00
badf7057f0
Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board
2015-04-25 10:41:27 +10:00
14b59151dd
Replaced LiquidCrystal_I2C lib with newer version which was reported to have worked on the arduino forum - ref http://forum.arduino.cc/index.php?topic=310743.msg2186521#msg2186521
2015-04-15 21:08:01 +10:00
f9db223756
Changed to new library format and also updated comments in examples
2015-04-09 19:59:19 +10:00
84019eede7
renamed OneWireSTM exampeles from pde to ino extension
2015-04-09 19:51:34 +10:00
54ceae68ce
Renamed OneWire library to OneWireSTM and also modified so it doesnt crash Maple or Maple mini boards
2015-04-09 19:50:32 +10:00
5dcfa4f1b0
Removed non standard functions togglePin, toggleLED,isButtonPressed, and waitForButtonPress. And updated all examples that used these, to use other functions. Note togglePin was used internally in shiftOut. Also note, that some of these functions were replaced by the code that was inside the non standard function e.g inside togglePin. In the longer term these internal maple function calls need to be replaced by high level Arduino API calls like digitalRead and digitalWrite where applicable
2015-04-07 20:57:51 +10:00
664e1c88ac
Second attempt at SPI::DMATransfer. Now uses separate tx and rx buffers, and I also added code to wait for tx to complete and SPI to not be busy before exiting the function. Note. Operation of rx buffer has not been tested
2015-03-30 06:47:26 +11:00
5f9e8a04dd
Added first pas at SPI::DMATransfer(byte *buf, int length) - and updated ILI9341 lib to use DMA Transfer for fill rect
2015-03-30 03:31:41 +11:00
a47caee80d
Added old Adafruit_ILI9341 lib, and modified the STM version of the lib so that the class name matches the filename for adafruit_ILI9341_STM
2015-03-27 10:08:47 +11:00
88933cb191
Merge branch 'master' of https://github.com/victorpv/Arduino_STM32 into victorpv-master
2015-03-21 05:03:17 +11:00
ab59d0e690
ILI9341_due adapter for STM32F1 DMA
2015-03-19 23:06:51 -05:00
78f9031154
Renamed libraries, but using original function names.
...
This way one knows if he is using the old or STM library by looking at
the include line, while the sketch should compile file as the functions
are named the same. I believe this is the best compromise.
2015-03-18 11:27:31 -05:00
cbfb5d40b0
Part of the previous commit, github didn't catch this first.
2015-03-18 08:59:25 -05:00
fcdd15e0ad
Revert "Revert "These are the DMA ILI9341 library and Extra fonts GFX""
...
This reverts commit 6cc87e88bb
2015-03-18 08:57:46 -05:00
6cc87e88bb
Revert "These are the DMA ILI9341 library and Extra fonts GFX"
...
This reverts commit 7e41e0d11b
2015-03-18 08:55:48 -05:00
7e41e0d11b
These are the DMA ILI9341 library and Extra fonts GFX
...
Added DMA support for STM32F1xx, and extra check in line and rect
funtions to avoid trying to draw a 0 width or 0 height line/rectangle,
which would cause 0 bytes DMA transmission and hang in a loop.
2015-03-18 08:55:11 -05:00
e9f67b2f63
Added accessor function for the spi device to spi.h
2015-03-18 20:32:56 +11:00
d8cf268443
Added adafruit_gfx_as library adapted to maple mini
2015-03-12 19:43:53 -05:00
5a3f0db33a
Added adafruit_gfx_as library adapted to maple mini
2015-03-12 19:43:03 -05:00
9cc8f9a0f0
Speed improvements to ILI9341 library (between 25% and 58% faster depending on which function is being called
2015-03-07 05:47:07 +11:00
ef6adc6534
Added LCD7920 library ported by Matthias (@madias on the Arduino forum)
2015-03-07 00:28:59 +11:00
33e332b0a6
Updated readme.txt in ili9431 lib
2015-03-07 00:24:53 +11:00
3bc36db069
Added modified version of AdaFruit_ILI9341 library, based on work by Matthias (@madias on the Arduino forum). Also includes a small speed optimization to call nonstandard spi::write(byte) function, as this gives around 20% speed improvement. Note SPI clock rate, chosen my @madias, of DIV_2 is 36Mhz, which exceeds the publish maximum spi clock of 10Mhz, however it seems to work with most devices
2015-03-06 23:03:45 +11:00
ac742edbd7
Improved speed of SPI::write(byte)
2015-03-06 22:40:53 +11:00
0ca64e1a9a
Brought latest version of my fork of the OneWire libary into the repo as a copy. Note. I've not used a submodule as this is harder for people to clone
2015-02-28 09:17:31 +11:00
06a9ad1ec0
Moved Servo library out of the untested folder now that its been tested and proved working by @ahull on the Arduino forum
2015-02-26 16:15:23 +11:00
29ddd3beef
Update SPI library properties file to fix issue caused by changing folder namne from STM32F1XX to STM32F1
2015-02-26 07:45:16 +11:00
d1950f0aaf
Moved untested and probably not working libraroes to a 'Untested' subfolder within libraries
2015-02-25 08:02:07 +11:00
5f83c13285
renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4
2015-02-24 20:13:04 +11:00
rogerclarkmelbourne
victorpv
Roger Clark