ed82be4c6e
Updated Linux 45-maple.rules
...
See http://stm32duino.com/viewtopic.php?f=16&t=1103&start=40#p20732
2016-12-02 10:32:17 +11:00
a1f154bc37
Added newer dfu-util for F4 DFU testing
2016-11-30 09:45:16 +11:00
7985f25fbc
Fixed path an permissions issue with linux jlink upload script
2016-10-17 12:43:16 +11:00
073aa23ed2
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/master'
2016-10-16 23:02:16 +02:00
6bbb5dc506
Added JLink upload to Windows and fixed intermitten JLink upload issues
2016-10-16 16:46:40 +11:00
293b693996
Added JLink upload method for F103C8 to Linux (untested)
2016-10-16 14:47:53 +11:00
478ef73b48
update STM32F4 environment for macosx
...
remove extra definition in platform.txt
2016-09-06 18:12:11 +09:00
8c6f302e9c
Effecively disabled the code that waits for serial device re-enumeration
...
See http://stm32duino.com/viewtopic.php?f=35&t=1251
2016-07-16 09:15:32 +10:00
2c25a5f7dd
Recopied tools/linux to tools/linux64 and rebuilt stm32flash and stlink binaries for 64 bit, and replaced dfu-utl binary with 64 bit version from martinayotte
2016-05-07 12:08:17 +10:00
7e06070ade
Started to add linux 64 bit support, by copying the linux folder to linux64 and changeing platform.txt. Also copied scr folder into each platform's folder to allow the src to be distributed even if the tools are split up when using the Board Manager
2016-05-07 08:02:54 +10:00
9695c368e0
Merge pull request #118 from mwm/master
...
Fix file open to actually turn on inbound parity checking.
2016-04-17 20:51:59 +10:00
9bf2af2dfc
Install udev-rules for ST-link
2016-04-17 09:34:46 +03:00
ba5d4058f1
Merge branch 'development'
2016-02-28 14:52:14 +11:00
cf16dcd8f6
Update dfu-utils for OS X 10.11.2
2016-01-10 15:32:01 +01:00
acf956a3e7
Compiled new version of stm32flash for OSX, with changes from @jcw
2015-11-21 19:42:53 +11:00
d0ed1941bb
Merge branch 'master' into development
2015-11-20 20:27:18 +11:00
3e41a7458c
remove the cflag check
2015-11-15 13:51:32 +01:00
44af152967
Partial reversion of maple_upload
...
Change at line 20 unnecessary.
2015-10-30 13:56:36 -05:00
5a1944c795
Fix case of spaces in path to linux tools directory
2015-10-30 13:21:41 -05:00
bd6d3b5092
Fixed issue in linux maple_upload.sh caused by paths with spaces in them
2015-10-29 19:55:47 +11:00
47e3050025
Added empty board.txt files to drivers, examples and tools, to stop the IDE warning messages (as these folders don't contain cores
2015-10-27 10:48:08 +11:00
09f6ccbb8d
Fix file open to actually turn on inbound parity checking.
...
The INPCK bit is an i_flag bit, not a c_flag bit as originally done
here. I have no idea what setting INPCK in c_flag does on Linux, but
on FreeBSD it caused the test of the c_values after they were set to
fail. This fixes that, and presumably the serial interface will now
actually check the parity of incoming data.
2015-09-24 20:44:03 -05:00
f3c46b0842
Fixed OSX upload reset issue by appending -R to the dfu upload command in the macosx maple_upload script
2015-08-17 08:45:37 +10:00
5bc3de4331
Fixed DFU upload reset issue by appending -R to the linux maple_upload script
2015-08-17 08:44:32 +10:00
3b8b7a79f4
Bugfix for HardWire/I2C + configured/compiled dfu-util to work on Linux again
...
- Fixed 0 byte payload bug, stopping HardWire from sending only addresses to scan for devices
- Fixed I2C bug accessing wrong status register for error flags
- Improved Hardwire endTransmission() return flags to correspond with the actual I2C failure status
- Removed dos endings from dfu-util autogen script breaking compilation
2015-08-01 18:58:14 +01:00
ce70ae4fce
Added source to maple_loader.jar
2015-07-20 06:38:38 +10:00
8ab4734573
Add cached dfu-util sources, as the original remote repo is no longer available for use as the source to the dfu-util folder as a submodule
2015-07-09 20:15:54 +10:00
9056c63977
Removed submodule dfu-util
2015-07-09 20:09:11 +10:00
e0d6307685
Built Linux binary and also changed printed message to indicate this is a special version built for Arduino STM32
2015-07-08 19:48:57 +10:00
176db5f9d0
Fix issue on OSX (and other platforms) where stm32flash only works if the serial device name starts with /dev/tty, as on OSX some serial devices start with /dev/cu. Also corrected mistake about .a file in stm32 parsers folder, and hopefully removed the .a file from source control
2015-07-08 15:14:25 +10:00
cd9e17deea
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_stm32
2015-07-06 09:23:37 +10:00
58a5799ace
Added linux install file missing after previous name change to this file
2015-07-06 09:23:01 +10:00
8c327aca05
Added OSX DFU binaries and changed the OSX maple-upload script to use them. (This saves users having to install dfu-util themselves, e.g. via Homebrew
2015-07-04 10:15:44 +10:00
70403109c5
Updated Linux install script so that it also adds the current user to the dialout group. Also removed duplicate copy of the Linux install script from drivers/linux
2015-07-03 21:31:50 +10:00
3b2c87de5a
Updated linux tools to contain upload-reset (bin) utility, and modified maple-upload script to use this utility to reset the bootloader prior to upload. Also changed maple-upload so that it uses the pre-compiled dfu-util binary that is now part of the repo
2015-06-28 11:06:00 +10:00
0ff9438aa1
Added osx upload-reset binary omitted from last commit
2015-06-16 21:25:40 +10:00
a25bb2b50b
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-06-16 21:23:52 +10:00
a7244e0e89
Added upload-reset.c source. Added upload-reset OSX binary, and modified maple-upload script to use upload-reset
2015-06-16 21:23:43 +10:00
53e4329a75
add dfuse_addr arguments option for tools/macosx/maple_upload
2015-05-31 13:22:21 -04:00
44bfd8ae54
fix SetupClock168() for Netduino2Plus + add STM32Stamp/Netduino2Plus boards + add dfuse_addr in upload
2015-05-28 17:20:49 -04:00
8540c26429
Changed Windows STlink upload to use STM's own STLink CLI Exe as this supports more STLink hardware than Texane-STLink and some users had problems with Texane on F4 and F3 boards
2015-05-26 14:09:46 +10:00
973fa0268e
Added Black Magic Probe upload support for C series boards, Note Windows BAT file has not been tested yet
2015-05-19 21:44:10 +10:00
f90929bfa8
Added dfu-util src as a sub module, also added compiled dfu-util files to tools/linux and added script to set udev rules, which I took from the old Maple IDE
2015-05-10 20:26:17 +10:00
766f9f37e1
Fixed issue with empty line at top of linux stlink_upload script (issue #48 )
2015-05-05 21:39:21 +10:00
5916e8c3be
Updated linux stlink_upload
2015-05-05 10:06:31 +10:00
e7e552fef6
Accidenly updated the linux serial_upload instead of stlink upload, so I have re-instated its contents
2015-05-05 10:05:22 +10:00
666b5b3da3
Updated stlink_upload script for Linux to enhanced code from @ahull
2015-05-05 08:13:32 +10:00
4f9a83e08b
added linux32 versions of stm32flash and stlink binaries and used scripts from OSX for these in linux as the scripts are identical
2015-05-02 19:09:45 +10:00
3d17dbce37
Added Windows binaries for Texane-stlink, and changed Windows stlink ulload bat file to use the new files. Tested and working on STM32F103C8 using 'STM32 to Flash (no bootloder)' board type
2015-04-29 20:52:38 +10:00
bbf58007fa
Removed .o and .a files from stm32flash src that should not have been tracked in the first place
2015-04-18 11:25:09 +10:00
Roger Clark
stevstrong
Yoshitaka Kuwata
WereCatf
Sebastian Kostka
Roger Clark
Jean-Claude Wippler
David Brunell
rogerclarkmelbourne
Mike Meyer
Fergus
Martin Ayotte