ed7560e284
Merge pull request #338 from victorpv/patch-2
...
Correction to upload issue in Sloeber
2017-09-17 18:24:29 +10:00
a706616ab5
Merge pull request #340 from victorpv/patch-4
...
Correct issue with I2C port speed not changing after begin()
2017-09-17 18:13:02 +10:00
a530b6a3d4
Update Wire.cpp
...
Adds a check to verify if the port had been already enabled, and only in that case disables/re-enables the port. This also solves the issue of setClock being called after begin(), but doesn't not enable the port if begin() had not been called yet.
2017-09-11 22:49:03 -05:00
799f2b3b8a
Correct issue with port speed not changing.
...
The current implementation will not change speed if Wire.setClock is called after begin() since the flags are only applied when the port is enabled from being disabled.
Corrected that by adding 2 lines to disable the port, and then enable it again with the new settings.
Tested and confirmed the new speed is applied.
2017-09-11 22:01:55 -05:00
81100beeea
Updated readme
2017-09-05 17:03:16 +10:00
56abaa3173
Correction to upload issue in Sloeber
...
As discussed in http://stm32duino.com/viewtopic.php?f=41&t=2535
Changes to the Generic Boards options so the maple dfu option is the default one and Sloeber uploads correctly.
2017-09-04 10:41:58 -05:00
b1e1782019
Fix for map() function - supplied by @Pito
2017-09-03 11:00:16 +10:00
23fa7b7c34
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2017-09-03 10:51:24 +10:00
58e50e7fd9
Add partial support for a DFU bootloader for the F4
2017-09-03 10:51:08 +10:00
5d4cbff491
Merge pull request #337 from janchrillesen/master
...
Add JLink upload support for OSX
2017-09-01 09:28:50 +10:00
f12bad6790
add JLink upload support for OSX
2017-08-31 20:54:29 +02:00
47c94bc10c
Update Arduino IDE version in readme
2017-08-26 20:34:43 +10:00
5058d8f583
Removed support for GD32 - by removing entry from boards.txt
2017-08-26 14:37:40 +10:00
71d5ab9112
Wire lib change buffer size definition to BUFFER_LENGTH for better AVR compatibility
2017-08-25 18:33:04 +10:00
30e5aea842
Merge pull request #327 from victorpv/patch-2
...
Adding new.cpp to the F4 as in F1 core.
2017-08-19 11:10:15 +10:00
a9767e4c53
Adding new.cpp as in F1 core.
...
This is to avoid libstdc++ being pulled in when new() is used.
Already included in the F1 in 2016.
Discussed on this thread:
http://www.stm32duino.com/viewtopic.php?f=39&t=2460&p=33163
2017-08-18 17:33:00 -05:00
33411b6e94
Default Wire to 100khz
2017-08-06 21:04:02 +10:00
8f7a0b6d5a
Added pushColors() to ILI9341 library to better support the OV7670 camera
2017-08-04 20:34:48 +10:00
df9476ccd5
Merge pull request #325 from victorpv/patch-1
...
Correcting FreeRTOS900 examples to include right version
2017-08-04 16:24:52 +10:00
db9a70c74f
Correcting FreeRTOS900 example.
2017-08-03 11:48:26 -05:00
1ea988a57d
Correcting FreeRTOS900 examples
...
The examples were still including the 821 version of FreeRTOS, so changing them to include the right one.
2017-08-03 11:47:15 -05:00
0a9d06b5e5
Fix typo in dma.h (thanks to @stevestrong)
2017-08-03 09:28:14 +10:00
ea8622c894
Merge pull request #322 from mtiutiu/mtiutiu/gd32_variant_linux_fix
...
linux fix for gd32 variant in boards.txt
2017-08-01 19:59:21 +10:00
859a447ecf
linux fix for gd32 variant in boards.txt
2017-08-01 10:35:47 +03:00
bc41851ce4
Changed default Wire (I2C) to use hardware I2C rather than bit banged software. The existing software Wire implementation has been retained as SoftWare. Examples have also been updated to include Wire, HardWire and Softwire.
2017-08-01 16:47:39 +10:00
87e0a3e89e
Merge pull request #321 from mtiutiu/mtiutiu/compiler_opts_menus
...
Menu optimizations support for F3/F4 boards
2017-07-31 19:36:18 +10:00
c0f655f90f
added menu optimizations support for F3/F4 boards
2017-07-31 11:42:28 +03:00
ac27993d10
Added makeWord macro and functions to fix #316
2017-07-31 13:33:00 +10:00
7d1119ee34
Removed Debug with LTO optimisation option, to fix issue #320
2017-07-31 10:56:31 +10:00
14ddcfd97d
Changed text on 128Mhz CPU speed option - to add warning that there is No USB and also Manual reset needed to upload
2017-07-31 10:51:52 +10:00
375a8f84b5
Fixed typo in F1 boards.txt for STM32F103CB RAM size
2017-07-30 20:08:20 +10:00
cb901b4e4f
Added CPU Speed menu to all boards except Nucleo RB, with additional entry for 128Mhz Turbo - NO USB. Note only tested on the Blue Pill
2017-07-30 17:43:40 +10:00
7aae010eae
Fixed yet another of my typos in the optimisation menu
2017-07-30 17:05:57 +10:00
86d823a3b5
Fixed typo in optimisation menu
2017-07-30 16:21:26 +10:00
a683dfccca
revert changes to STM32F3/platform.txt and STM32F4/platform.txt as they should not have been changed in the previous commit
2017-07-30 16:16:24 +10:00
3f7eb8e4db
Merge branch 'mtiutiu-mtiutiu/compiler_opts_menus'
2017-07-30 16:11:19 +10:00
0aae3d31f1
Changed order of optimisation options, so that current settings (-Os) are the default, and reverted F4 and F3 boards.txt to current master to remove these changes from those boards, as they will need to be updated in the same way I did for the F1, and I don't have time to do it now
2017-07-30 16:07:30 +10:00
0696f70148
Merge branch 'mtiutiu/compiler_opts_menus' of https://github.com/mtiutiu/Arduino_STM32 into mtiutiu-mtiutiu/compiler_opts_menus
2017-07-30 10:26:52 +10:00
a4d88f7d1b
Merge branch 'stevstrong-SPI_write16'
2017-07-30 09:02:49 +10:00
0db43ae36f
SPI clean up + add 16 bit access functions in 8 bit mode
2017-07-28 17:51:54 +02:00
359db540dd
Merge branch 'refs/heads/RTC_F4'
2017-07-26 23:06:28 +02:00
979fc8790c
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/master'
2017-07-26 22:52:40 +02:00
f8be57c6de
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/master'
2017-07-26 22:40:34 +02:00
19aa9cc697
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/master' into RTC_F4
2017-07-26 22:39:19 +02:00
6b85615221
Change Wire endTransmission to have bool instead of unit8 argument - to match with the Arduino API
2017-07-20 17:43:13 +10:00
24506095bb
Merge pull request #315 from stevstrong/RTC_F4
...
Reworked RTC for F4
2017-07-20 09:04:42 +10:00
b29fed855b
reworked RTC - no need for extra time library
...
http://www.stm32duino.com/viewtopic.php?f=39&t=775&p=31218#p31218
2017-07-19 19:11:44 +02:00
8b4af3604a
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/master'
2017-07-19 18:42:37 +02:00
e8a195dd42
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/master'
2017-07-19 18:13:24 +02:00
7fbc4b16fe
Merge pull request #314 from hemalchevli/master
...
Fixed readme.md headings
2017-07-19 16:00:39 +10:00
Roger Clark
victorpv
Jan Chrillesen
Cristi Marius Tiutiu
stevstrong