664c8c5981
Added Adafruit Touchscreen Library
...
Added support for STM32 to the Adafruit Resistive Touchscreen library.
2015-09-26 09:13:32 -05:00
2e9b4f3955
Merge pull request #110 from Serasidis/patch-2
...
Serasidis_VS1003B_STM - Updated the example for using it with the new one SPI library.
2015-09-09 21:13:52 +10:00
89a5a661f3
Updated the example for using it with the new one SPI library.
2015-09-09 12:33:42 +03:00
0b9e84d8fa
Updated the example for using it with the new one SPI library.
2015-09-09 12:32:00 +03:00
88d2457f30
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
2015-09-06 07:51:40 +10:00
fea15b00d6
VS1053B MIDI example is added
2015-08-29 23:08:22 +03:00
461b86207e
Added Serial.begin(115200) to both examples so that they work on non-bootloader boards
2015-08-06 17:42:04 +10:00
fa94d9f143
Merge branch 'master' of https://github.com/fergul/Arduino_STM32 into fergul-master
2015-08-06 17:32:13 +10:00
ab37760af7
Oops. Failed to save the revised definition for SOFT_STANARD Wire speed which should have been part of the previous commit
2015-08-03 09:48:50 +10:00
885d3f2c5c
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-08-03 09:46:33 +10:00
d3bd109013
Changed default speed on Wire library to 100kpbs (same as AVR Arduinos), thanks to @fredbox on the forum for the delay values to achieve 100kbps
2015-08-03 09:45:57 +10:00
572b311c3a
Fixed formatting to match existing style + Hardwire comments
2015-08-01 19:09:43 +01:00
61b212d42b
Added i2c_scanner examples to Wire library for testing HWire and Wire
2015-08-01 19:04:18 +01:00
3b8b7a79f4
Bugfix for HardWire/I2C + configured/compiled dfu-util to work on Linux again
...
- Fixed 0 byte payload bug, stopping HardWire from sending only addresses to scan for devices
- Fixed I2C bug accessing wrong status register for error flags
- Improved Hardwire endTransmission() return flags to correspond with the actual I2C failure status
- Removed dos endings from dfu-util autogen script breaking compilation
2015-08-01 18:58:14 +01:00
0ec837f08c
Fix for uninitialised vars in dmaTransfer and dmaSend (as detailed by victor_pv)
2015-07-28 12:00:16 +10:00
07ba8f279a
Updaded SPI with update from VictorPV
2015-07-26 04:58:12 +10:00
fc50831843
Continued with SPI setModule - still doesnt work when I tried setModule(2);
2015-07-08 11:14:57 +10:00
20a9214291
Some fixes. Works for SD example SPI 1, not tested with anything else. setModule not tested
2015-07-07 20:59:33 +10:00
2e13a1d57e
Initial attempt at SPI setModule - but it doesn't seem to work for SPI2 etc, even when not using setModule to select the SPI channel, when I tested with a VS1053 board attached to SPI2 and SD on SPI1
2015-07-07 07:27:09 +10:00
1e4fdf743a
FLAC decoder patch
...
By uncommenting "#define USEFLAC" in VS1003_STM.h the FLAC patch will be
loaded at begin time.
2015-07-01 20:16:27 +07:00
501da92986
Added a line in SPI.cpp to default the bitOrder to MSBFIRST
2015-06-25 09:36:23 +10:00
c0fd4e3038
Added Ethernet_STM library provided by Vasillis Serasidis (@Serasidis)
2015-06-18 02:29:32 +10:00
7823a48ea2
Added TFT_ILI9163C library from @Victor_pv
2015-06-18 02:26:02 +10:00
7d7f113f63
improved vasillis's SPI 2 demo
2015-06-12 09:49:00 +10:00
1a676200f7
Example of using the SPI_1 and SPI_2 ports on STM32F103.
2015-06-11 15:01:45 +03:00
657d6dae02
Alternative / better fix provided by @pico based on work by @victor_pv. Commented out AF REMAP of NSS in spi_f1.c
2015-06-10 10:33:13 +10:00
ece9c3681d
Added code to 'get' the gpio mode of a pin, and have used it in SPIClass::begin() to store and reinstate the pin mode of the SPI NSS pin. This is a work around for 'features' in the STM32 silicon, which seem to change the GPIO mode of the SPI NSS (hardware - 'Software Select' pin)
2015-06-10 10:25:22 +10:00
263d3af266
Added files missing from the last commit
2015-06-06 08:16:20 +10:00
1af98fed89
Converted VS1003 lib to new lib style including keywords
2015-06-06 08:15:47 +10:00
2797907221
Added support for SPI 2 to VS1003 library, and made a change to SPI to support other libs being able to select which SPI they want to use (issue with const in transfer()
2015-06-06 07:46:42 +10:00
146dad4512
Upadted VS1003_STM lib with latest files from Vasillis Serasidis
2015-06-03 10:44:10 +10:00
0a77202ed4
Merge pull request #69 from Serasidis/master
...
AddedENC28J60 Ethernet library for STM32, from Vasillis Serasidis
2015-05-29 09:26:22 +10:00
ed14ded3cc
ENC28J60 Ethernet library for STM32.
...
Example sketches that use the EtherCard library.
2015-05-28 16:48:02 +03:00
eee152ceca
ENC28J60 Ethernet library for STM32.
...
12
2015-05-28 16:47:02 +03:00
9011387505
ENC28J60 Ethernet library for STM32.
2015-05-28 16:41:18 +03:00
a61bd57817
ENC28J60 Ethernet library for STM32.
...
The ReadMe file
2015-05-28 16:34:55 +03:00
ce860eab9e
ENC28J60 Ethernet library for STM32.
2015-05-28 16:33:15 +03:00
276ebf3c9a
1
2015-05-28 16:31:56 +03:00
dcaa115d0a
Present a "Will be back soon web page", as stand-in web server
2015-05-28 16:30:03 +03:00
44b9f888d7
Keywords of the library
2015-05-28 16:26:41 +03:00
8ab2afbe84
Library properties
2015-05-28 16:26:22 +03:00
c865aefe59
Revert "Delete README.md"
...
This reverts commit 7a087b3e24
2015-05-28 16:22:52 +03:00
7a087b3e24
Delete README.md
2015-05-28 15:19:53 +03:00
30bcd528ef
Create README.md
2015-05-28 15:17:45 +03:00
4948c208a1
Merge pull request #68 from victorpv/SPI_changes
...
Merged change from Victor_PV, Removed SPI write() for 8 bit, as 8 bit is now handled by the new 16 bit write code
2015-05-28 11:23:55 +10:00
0a9b0a8b60
Merge pull request #67 from victorpv/ILI9341_without_DMA
...
Fix issue in Ili9341 without dma
2015-05-28 11:18:56 +10:00
d165e4d013
SPI updated to eliminate warnings
...
The same write function works for both 8bit and 16bit transfers, so
eliminated the 8bit one and that takes out warnings when the compiler is
not sure of the width. Tested with both ILI libraries (_STM and not STM)
2015-05-27 20:16:15 -05:00
a6e0fadb82
Reverts changes to the ILI9341 library that should not use DMA.
2015-05-27 20:05:35 -05:00
c39ccfab55
Merge pull request #63 from victorpv/ILI9341
...
Modifications to Ili9341_STM library
2015-05-28 10:42:16 +10:00
09f96592ad
Added a short video demonstration of the VS1003B_STM library.
2015-05-27 14:53:15 +03:00
157391d608
Added video demonstration of the VS1003B_STM library.
2015-05-27 14:51:43 +03:00
ea235f84b5
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-05-27 19:44:39 +10:00
da54c87173
Added Adafruit_SSD1306 and OLED_I2C libs ported by @Madias
2015-05-27 19:44:14 +10:00
c3f81756d8
Unused included libraries in hello_STM.ino file have been removed.
2015-05-26 12:40:44 +03:00
e069959d3e
Added VS1003V_STM from Vassillis Serasidis. Note. Had to make a minor change as PC7 used in the example was not availabel on Maple mini. So I changed this for PC14
2015-05-26 17:00:42 +10:00
84ff52b49d
Updated to use new DMA functions.
...
Previous version will not work anymore due to conflict of variable name
(dma1_ch3_active
2015-05-24 00:21:15 -05:00
f5b2940a49
Minor change to RTClock library keywords
2015-05-23 18:23:14 +10:00
a47f46f34a
Fixed issue with duplicate keywords in RTClock library
2015-05-23 11:21:26 +10:00
fd224ab288
Added working version of RTClock, thanks to Ray and @ahull etc
2015-05-23 11:19:16 +10:00
060dc414b9
Still part of the RTOS commit
2015-05-21 23:36:16 -05:00
377217c9f5
CoOS 1.12 and 1.1.6 (latest), and FreeRTOS 8.2.1
...
Ported FreeRTOS 8.2.1 by finding the changes in the 7.0.1 version and
carrying them over. Then found an almost working port of CoOS, and
corrected it to work, and then carried the changes to 1.1.6 Tested all
of them with USBSerial, GPIO, SPI, DMA and a DMA ISR all working fine.
Similar examples ported to all of them.
2015-05-21 22:44:41 -05:00
e13b9a0709
SPI DMA functions.
...
Adds 6 new functions: DMA Transfer, DMA 8bit send, DMA 16bit send, write
16 bit int. and mode change to change between 8bit and 16 bit transfer.
2015-05-21 22:35:40 -05:00
89d3262d17
Movred FreeRTOS from untested into the libraries folder now its been tested by @victor_pv
2015-05-19 07:45:47 +10:00
badf7057f0
Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board
2015-04-25 10:41:27 +10:00
14b59151dd
Replaced LiquidCrystal_I2C lib with newer version which was reported to have worked on the arduino forum - ref http://forum.arduino.cc/index.php?topic=310743.msg2186521#msg2186521
2015-04-15 21:08:01 +10:00
f9db223756
Changed to new library format and also updated comments in examples
2015-04-09 19:59:19 +10:00
84019eede7
renamed OneWireSTM exampeles from pde to ino extension
2015-04-09 19:51:34 +10:00
54ceae68ce
Renamed OneWire library to OneWireSTM and also modified so it doesnt crash Maple or Maple mini boards
2015-04-09 19:50:32 +10:00
5dcfa4f1b0
Removed non standard functions togglePin, toggleLED,isButtonPressed, and waitForButtonPress. And updated all examples that used these, to use other functions. Note togglePin was used internally in shiftOut. Also note, that some of these functions were replaced by the code that was inside the non standard function e.g inside togglePin. In the longer term these internal maple function calls need to be replaced by high level Arduino API calls like digitalRead and digitalWrite where applicable
2015-04-07 20:57:51 +10:00
664e1c88ac
Second attempt at SPI::DMATransfer. Now uses separate tx and rx buffers, and I also added code to wait for tx to complete and SPI to not be busy before exiting the function. Note. Operation of rx buffer has not been tested
2015-03-30 06:47:26 +11:00
5f9e8a04dd
Added first pas at SPI::DMATransfer(byte *buf, int length) - and updated ILI9341 lib to use DMA Transfer for fill rect
2015-03-30 03:31:41 +11:00
a47caee80d
Added old Adafruit_ILI9341 lib, and modified the STM version of the lib so that the class name matches the filename for adafruit_ILI9341_STM
2015-03-27 10:08:47 +11:00
88933cb191
Merge branch 'master' of https://github.com/victorpv/Arduino_STM32 into victorpv-master
2015-03-21 05:03:17 +11:00
ab59d0e690
ILI9341_due adapter for STM32F1 DMA
2015-03-19 23:06:51 -05:00
78f9031154
Renamed libraries, but using original function names.
...
This way one knows if he is using the old or STM library by looking at
the include line, while the sketch should compile file as the functions
are named the same. I believe this is the best compromise.
2015-03-18 11:27:31 -05:00
cbfb5d40b0
Part of the previous commit, github didn't catch this first.
2015-03-18 08:59:25 -05:00
fcdd15e0ad
Revert "Revert "These are the DMA ILI9341 library and Extra fonts GFX""
...
This reverts commit 6cc87e88bb
2015-03-18 08:57:46 -05:00
6cc87e88bb
Revert "These are the DMA ILI9341 library and Extra fonts GFX"
...
This reverts commit 7e41e0d11b
2015-03-18 08:55:48 -05:00
7e41e0d11b
These are the DMA ILI9341 library and Extra fonts GFX
...
Added DMA support for STM32F1xx, and extra check in line and rect
funtions to avoid trying to draw a 0 width or 0 height line/rectangle,
which would cause 0 bytes DMA transmission and hang in a loop.
2015-03-18 08:55:11 -05:00
e9f67b2f63
Added accessor function for the spi device to spi.h
2015-03-18 20:32:56 +11:00
d8cf268443
Added adafruit_gfx_as library adapted to maple mini
2015-03-12 19:43:53 -05:00
5a3f0db33a
Added adafruit_gfx_as library adapted to maple mini
2015-03-12 19:43:03 -05:00
9cc8f9a0f0
Speed improvements to ILI9341 library (between 25% and 58% faster depending on which function is being called
2015-03-07 05:47:07 +11:00
ef6adc6534
Added LCD7920 library ported by Matthias (@madias on the Arduino forum)
2015-03-07 00:28:59 +11:00
33e332b0a6
Updated readme.txt in ili9431 lib
2015-03-07 00:24:53 +11:00
3bc36db069
Added modified version of AdaFruit_ILI9341 library, based on work by Matthias (@madias on the Arduino forum). Also includes a small speed optimization to call nonstandard spi::write(byte) function, as this gives around 20% speed improvement. Note SPI clock rate, chosen my @madias, of DIV_2 is 36Mhz, which exceeds the publish maximum spi clock of 10Mhz, however it seems to work with most devices
2015-03-06 23:03:45 +11:00
ac742edbd7
Improved speed of SPI::write(byte)
2015-03-06 22:40:53 +11:00
0ca64e1a9a
Brought latest version of my fork of the OneWire libary into the repo as a copy. Note. I've not used a submodule as this is harder for people to clone
2015-02-28 09:17:31 +11:00
06a9ad1ec0
Moved Servo library out of the untested folder now that its been tested and proved working by @ahull on the Arduino forum
2015-02-26 16:15:23 +11:00
29ddd3beef
Update SPI library properties file to fix issue caused by changing folder namne from STM32F1XX to STM32F1
2015-02-26 07:45:16 +11:00
d1950f0aaf
Moved untested and probably not working libraroes to a 'Untested' subfolder within libraries
2015-02-25 08:02:07 +11:00
5f83c13285
renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4
2015-02-24 20:13:04 +11:00
Jaret Burkett
Roger Clark
Vassilis Serasidis
rogerclarkmelbourne
Fergus
Teguh Sobirin
victorpv