Roger Clark 2e13a1d57e Initial attempt at SPI setModule - but it doesn't seem to work for SPI2 etc, even when not using setModule to select the SPI channel, when I tested with a VS1053 board attached to SPI2 and SD on SPI1		2015-07-07 07:27:09 +10:00
..
cores/maple	Move Timer ISR handlers from timer_f1.c to timer.c to resolve linker issue in which some ISR's were not being linked even though they were being used	2015-07-05 22:38:47 +10:00
libraries	Initial attempt at SPI setModule - but it doesn't seem to work for SPI2 etc, even when not using setModule to select the SPI channel, when I tested with a VS1053 board attached to SPI2 and SD on SPI1	2015-07-07 07:27:09 +10:00
system	Added code to 'get' the gpio mode of a pin, and have used it in SPIClass::begin() to store and reinstate the pin mode of the SPI NSS pin. This is a work around for 'features' in the STM32 silicon, which seem to change the GPIO mode of the SPI NSS (hardware - 'Software Select' pin)	2015-06-10 10:25:22 +10:00
variants	Changed all remaining boards to have HW serial definitions in board.cpp so that every board can configure which Arduino Serial instance maps to which hardware serial device	2015-05-31 16:09:26 +10:00
boards.txt	Tidied up names of Maple boards in boards.txt menu names	2015-07-05 11:06:32 +10:00
platform.rewrite.keys.txt	Updated platform.txt and added platform rewrite keys file to aid operation with IDE 1.6.2 onwards	2015-04-12 10:05:32 +10:00
platform.txt	Tidied up names of Maple boards in boards.txt menu names	2015-07-05 11:06:32 +10:00