74c65900a8
Updated images for v0.3.6
2017-11-20 09:12:01 +11:00
f33455229d
Change encoding used on ini file so the latest TS beta (3.0.50.17) can read it
2017-11-16 15:15:47 +11:00
36ca95a330
November dev signatures
2017-11-13 09:14:58 +11:00
bd9a445292
Wiki image for rotary settings
2017-11-12 21:49:14 +11:00
eead290bc6
Fix incorrect part designation on the MX5 PNP B2 BOM
2017-11-09 10:07:10 +11:00
883ba4a25f
Potential fix for access enrich overflow
2017-11-08 22:51:40 +11:00
fa5d721b98
October release signatures and base tune
2017-11-07 22:13:27 +11:00
cfb8d20f4e
Fix problem with the AFR correction ignition count not being checked correctly
2017-11-05 19:56:04 +11:00
4b5b040615
Merge pull request #110 from Autohome2/can-serial3
...
Can serial3 updates
2017-11-03 00:00:53 +11:00
380ffc20b8
update serial3 and canbus related data transfer protocols and naming
2017-11-01 20:17:47 +00:00
17030a9df7
Add in check for ignition count to the closed loop AFR control
2017-11-01 16:10:06 +11:00
c7a78ae44f
Fix duty cycle calculation when sequential fuel is used (+formatting of ini)
2017-11-01 13:33:39 +11:00
db720bfba0
MX5 PNP Beta 2 files
2017-10-26 23:14:39 +11:00
a1e8b9c874
Updated v0.4 image for wiki
2017-10-26 16:37:37 +11:00
b67ae45b69
Added NO2C pin mapping
...
Closes #106
2017-10-25 20:55:46 +11:00
4b20e61eb7
v0.3.6b files (Minor silkscreen and routing improvements)
2017-10-25 16:49:42 +11:00
1a86a738ed
Add ignition dwell gauge in TS
2017-10-24 21:10:47 +11:00
2ec972948f
Changes to logged variables
2017-10-24 16:54:18 +11:00
6a8ab1015b
Move the pulse width function into the speeduino.h scope
2017-10-24 14:08:32 +11:00
ac4a36529b
Cleanup work in the ini
2017-10-23 22:42:09 +11:00
e921901fc0
Pass fuel pulse width full value to TS
2017-10-10 21:58:03 +11:00
b93b0939ac
Revised boost setting image
2017-10-10 19:56:45 +11:00
91a428401a
October dev signature
2017-10-10 19:56:37 +11:00
b067ef100b
Signature and base tunes for Sep 2017 release
2017-10-09 12:02:05 +11:00
9202afe7cf
Prevent memory corruption from the page expansion
2017-10-04 12:24:40 +11:00
fcac8b731d
Minor tweaks to v0.3.6 BOM
2017-10-04 10:44:45 +11:00
44f4538d40
Updated design file for v3 of VR conditioner
2017-10-04 10:44:18 +11:00
57d4ee614a
Non-final version of Beta2 MX5 PNP
2017-10-04 10:43:39 +11:00
683fe44562
Initial work on rolling sign cut rev limit
2017-10-04 09:48:46 +11:00
172cd18435
Add explicit on/off mode for the VVT table
2017-10-02 20:01:08 +11:00
ed0908469a
Revised MX5 fuel pump image for wiki
2017-10-01 22:11:19 +11:00
b2552202b2
Draft image for fuel pump jumper on MX5
2017-10-01 00:37:25 +10:00
a54c7f3a8d
Final design files of the V3 VR conditioner
2017-10-01 00:10:26 +10:00
c901748974
Allow use of Analog pins for some selectable outputs
2017-10-01 00:07:36 +10:00
9774a60d7f
Updated files for v0.4.3b
2017-09-22 22:14:55 +10:00
7aa8d277f3
Potential fix for cranking problem on Miata 9905 pattern
2017-09-20 16:43:55 +10:00
9d89494666
Expand page 4 to 128 bytes
2017-09-20 12:15:41 +10:00
1cd2a0f296
Expand page 2 to 128 bytes in size
2017-09-19 15:09:32 +10:00
5b3df5ac4d
Merge config pages 6 and 7
2017-09-19 14:51:33 +10:00
6763ff15b4
Initial work on new serial comms protocols (Working, but slow)
2017-09-19 14:10:07 +10:00
1fa85bbbdb
Change wording on boost cut indicator
2017-09-18 10:41:00 +10:00
a1fa406cdd
Minor BOM changes
2017-09-13 08:13:17 +10:00
2d03665162
Remove unused odd fire variable
2017-09-12 14:02:00 +10:00
0694564ed1
September dev signature
2017-09-10 00:51:10 +10:00
d8d1d8ff04
August signature and base tune
2017-09-09 22:07:46 +10:00
7c0932a396
Adjust boost timings slightly
2017-09-07 06:20:22 +10:00
4e858f1ca8
Completed new PID mode for boost control
2017-09-04 11:50:55 +10:00
3b33094230
Initial commit of new Ideal PID implementation (Active for boost control)
2017-09-03 20:28:49 +10:00
bd54aae566
Enable per tooth timing on Nissan 360
2017-08-31 21:04:32 +10:00
e7ac717796
Startup improvements on Nissan 360 CAS
2017-08-31 18:01:37 +10:00
282f3a84aa
Wiki images
2017-08-31 14:42:37 +10:00
bb8807bbcd
SCAD file for PCB locator used on the PNP units
2017-08-31 14:42:20 +10:00
e93bf9f5ac
Fix RPM calc issue on Miata 99-05
2017-08-30 12:53:56 +10:00
a44f36b58c
Small cleanup in ini
2017-08-29 14:18:56 +10:00
8286cf0ac4
Initial commit of v3 VR conditioner files
2017-08-27 19:20:45 +10:00
4e47e8ae19
Cleanup page 11 array
2017-08-25 17:26:04 +10:00
fc06ce4d1b
Minor ini and comms cleanup
2017-08-24 17:24:28 +10:00
7db1101429
Completely untested trailing spark for FC rotary ignitions
...
May God have mercy on us all
2017-08-23 17:18:59 +10:00
f9609afeb9
Correct wrong resistor value on v0.4.3 schematic (BOM was correct)
2017-08-23 08:46:06 +10:00
539618c583
Initial interface work on rotary ignition modes
2017-08-23 08:14:11 +10:00
c791302a0e
Harley EVO decoder (courtesy of @bitwise17)
...
Closes #93
Slightly changed to fix bugs and be MISRA compliant
2017-08-17 14:17:21 +10:00
77094a59d1
Better startup procedure and DIY watchdog
2017-08-17 11:24:26 +10:00
7bb3642e14
Honda D17 tooth pattern
2017-08-10 17:07:46 +10:00
c8f08ddcbc
Wiki image for Daihatsu +1
2017-08-10 16:49:58 +10:00
345bf5d405
August dev signatures
2017-08-06 22:15:15 +10:00
be9ad6bb85
Fix missing value for TPS calibration
2017-08-06 17:12:57 +10:00
4f7e11c233
Fix for spark miss every ~250 revs
2017-08-06 17:00:58 +10:00
037c84039f
Added wiki image for updating page
2017-08-06 16:29:00 +10:00
a60e9397e6
MX5 PNP sensor calibration image
2017-08-05 11:11:53 +10:00
6727b0a750
Activate per tooth timing on dual wheel
2017-08-01 09:39:50 +10:00
523c05fda9
July signature and base tune
2017-07-30 23:07:48 +10:00
9cd31f335f
Cleanup of comms variables
2017-07-27 14:04:38 +10:00
3db9dc99fd
New MAP calculation method (More accurate and allows negative calibration values)
2017-07-27 12:47:59 +10:00
b42d0069ab
Clean up cranking enrichment dialog
2017-07-25 20:42:06 +10:00
e16da51101
Additional work for the new memory page
2017-07-24 14:19:07 +10:00
ccb6e194b7
Initial work creating a new memory page (pg 11)
2017-07-20 16:54:50 +10:00
9d2e938a4d
Initial (mostly untested) live baro reading
2017-07-17 17:06:14 +10:00
905a8642ff
July dev signature
2017-07-17 16:36:44 +10:00
e5591bc7bc
June signature and base tune
2017-07-11 16:21:44 +10:00
a9891ad38c
Fix name of Lambda entry in the log
2017-07-10 11:56:28 +10:00
7e5fb7bb5c
VR conditioner BOM template updates
2017-07-07 09:26:13 +10:00
3d2a692d53
Change freeRam() to unsigned int
2017-07-07 09:26:13 +10:00
1f03499725
further cleanup of ini and msq
2017-07-05 16:02:07 +01:00
d7f374b473
Merge dazq CAN changes
...
Closes #91
2017-07-05 22:28:11 +10:00
5992e31f2f
Experimental commit of per tooth based ignition timing
2017-07-03 18:39:10 +10:00
7f86b91198
Add fields to allow custom MAP sensors being entered
2017-07-03 12:14:07 +10:00
f67f24f16d
Merge pull request #89 from Autohome2/can_io_2
...
External devices over serial3 update
2017-07-02 22:40:45 +10:00
c00b7b597e
Minor correction to MX5 BOM
2017-06-30 16:51:06 +10:00
0637138979
Minor MX5 PNP schematic cleanup
2017-06-30 16:44:10 +10:00
874787a5a9
Updated BOM templates
2017-06-29 14:29:13 +10:00
3b8ab80897
End plate files for the MX5 PNP
2017-06-28 12:06:33 +10:00
652624b288
Add initial Daihatsu +1 decoder (also 3 cylinder sequential ignition)
2017-06-26 17:34:10 +10:00
695bc43197
Teensy adapter PVT3 files
2017-06-20 23:45:00 +10:00
8db13859e1
Merge branch 'master' into can_io_2
2017-06-20 02:44:51 +01:00
0ea42483d0
Merge branch 'can_io_2' of https://github.com/Autohome2/speeduino into can_io_2
2017-06-20 02:30:37 +01:00
35dfa6395d
support read values(16channel) from gpio or other external device . other device can also access the speeduino data values(realtime)
...
all via serial3
2017-06-20 02:29:55 +01:00
5c25590f82
Fix warnings for PSIG :)
2017-06-14 18:07:06 +10:00
7c36ff853b
Gerber files for v2 of Teensy adapter
2017-06-13 17:06:25 +10:00
244b7a068e
Add missing pin mapping for stepper on Teensy adapter
2017-06-13 17:05:02 +10:00
1a72d50985
Merge pull request #40 from noisymime/master
...
update 13062017
2017-06-13 03:16:31 +01:00
0296f06438
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 03:02:50 +01:00
3065620606
MX5 wiki images
2017-06-12 12:03:38 +10:00
ae7a75673f
June dev signature
2017-06-06 08:32:08 +10:00
4f62900cba
May base tune file
2017-06-05 14:41:58 +10:00
02564d3218
May signature
2017-06-05 14:28:28 +10:00
3dd5ab7370
Tentatively working lambda option
2017-05-27 22:16:42 +10:00
98c3a51ec2
WUE VEAL testing added (Currently disabled)
2017-05-26 13:09:19 +10:00
a106ea72ca
Have the missing tooth decoder use the cranking specific RPM calc
2017-05-20 21:55:50 +10:00
535756f656
MX5 PNP board Beta 1
2017-05-17 19:58:58 +10:00
fbde19253f
Clear cranking and WUE bits when engine speed drops to 0rpm
2017-05-16 22:01:33 +10:00
81c548a9e8
Tentative 6 cylinder support (3000GT) added to 4G63 decoder
...
Requested in #76
Needs testing. Select the decoder and set cylinders to 6.
Note that the Medium and Aggressive trigger filters do NOT currently
work for 6 cylinders and should not be used.
2017-05-16 16:49:35 +10:00
1db7be4a33
Flex fuel boost adder
2017-05-12 18:14:14 +10:00
bcd7b29b59
Merge pull request #86 from Autohome2/can-serial3
...
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 21:53:19 +10:00
2d72de80e0
More wiki images
2017-05-11 09:56:20 +10:00
bffb4fb72f
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 00:08:24 +01:00
39427c9275
Wiki images
2017-05-10 23:42:59 +10:00
cfebe84514
Belated May dev signature
2017-05-10 13:55:26 +10:00
a7460f93d2
Merge pull request #85 from Autohome2/can-serial3
...
serial3 and canbus integration improvements
2017-05-10 12:15:29 +10:00
04a6866115
Allow spark advance values below 0 in the main table
2017-05-09 17:29:55 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
db147b5ccb
Updated v0.4.3 BOM with in-stock part numbers
2017-05-08 09:40:46 +10:00
8aebd102f6
Updated v0.3.6 BOM with latest in-stock part numbers
2017-05-08 09:17:43 +10:00
b0d0c40bec
April signature and base tune
2017-05-06 23:43:57 +10:00
2004034674
Add CRC stack for testing (Currently unused)
2017-05-05 08:52:10 +10:00
fca0a7ecbd
BOM for v0.3.6
2017-05-03 07:36:52 +10:00
88c3cb0167
A couple more wiki images
2017-05-03 07:08:36 +10:00
eaabc2f3ce
Final v0.3.6 design files
2017-05-03 07:08:23 +10:00
fa9f418c35
Resolve all pr/77 conflicts
2017-05-02 21:17:33 +10:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
4f9c60b75e
Final design files for v0.4.4-SMD
2017-04-30 08:32:47 +10:00
6bc724547e
More image tests
2017-04-27 23:05:58 +10:00
6700a89731
Test wiki image
2017-04-27 22:57:14 +10:00
9b58da838c
More wiki images
2017-04-27 22:24:04 +10:00
bb157edf5f
Whole bunch of wiki images
2017-04-26 18:44:53 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
71e963e196
Log dwell as a float rather than an int
2017-04-22 10:03:10 +10:00
538bc5f0bf
Initial commit of dwell limiting when it exceeds maximum time in revolution
2017-04-21 17:29:09 +10:00
1f38836db0
New revision of MX5 interface board
2017-04-16 22:08:17 +10:00
ac37fafc84
April dev firmware
2017-04-15 08:40:29 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
fa83faa2f0
Part number tweaks for v0.4.3 board
2017-04-06 22:47:29 +10:00
9cc1114334
Part number tweaks for v0.3.5 board
2017-04-06 22:17:13 +10:00
57aa06634f
PCBA templates for the VR conditioner
2017-04-06 21:54:41 +10:00
7b2a900c06
Some initial files for the SMT 0.4.4 board
2017-04-06 21:07:28 +10:00
ecd62735fc
Endplate 3D files for MX5 PNP case/board
2017-04-06 20:38:47 +10:00
70282e329c
Some wiki images
2017-04-05 09:48:24 +10:00
5d031a0fc9
Signature and base tune for March
2017-04-03 16:12:24 +10:00
34b9adb777
Add stepper idle disable function for DRV8825
2017-04-02 21:17:29 +10:00
676a001fb8
Initial commit of Subaru 6/7 (Likely has bugs)
2017-03-31 22:39:33 +11:00
822c400c01
Fix for potentially wrong initialisation of the on/off idle control
2017-03-30 00:01:52 +11:00
e96feaa560
Add VW/Audi/Porsche MAP sensor
2017-03-29 20:51:11 +11:00
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
d1d5bfe665
Bunch of images for the wiki
2017-03-22 17:17:36 +11:00
8fc87e062a
Fixes for closed loop stepper idle (Now ready for wider testing)
2017-03-22 12:44:22 +11:00
697e3a2c17
Add option to disable resync once every cycle (Dual wheel, Audi 135 and 4G63)
2017-03-21 17:19:07 +11:00
880947746f
Many small updates to the idle system (Including additional logging)
2017-03-20 22:29:42 +11:00
c28547dc3a
Add a bunch more values to the log output (Including boost duty)
2017-03-16 18:17:12 +11:00
fc265919df
Add new logos for wiki
2017-03-14 00:07:03 +11:00
35e67e5ee6
Fix incorrect memory addresses in ini for boost and flex
...
Fix still required for developer brain fart.
2017-03-13 17:02:54 +11:00
31836511a3
Initial closed loop stepper idle (Not quite complete)
2017-03-10 20:34:39 +11:00
abef8df43f
Fix warnings in TS due to unterminated sentences
2017-03-10 13:16:56 +11:00
74cf93b979
add test modes to injector and spark outputs
2017-03-10 00:46:11 +00:00
d686364e69
March dev signature
2017-03-08 13:19:30 +11:00
a0ede949b7
Base tune and signature update for Feb release
2017-03-03 12:51:34 +11:00
707d65cac8
Shuffle around memory to make upgrades simpler
2017-02-26 16:33:03 +11:00
16cfe02533
Revised v0.4.2 schematic to fix incorrect labels. Cleanup of folders for v0.4
2017-02-24 08:32:46 +11:00
79323b197f
Revised v0.3.5 schematic + images. Fixed 1resistor reference in BOM
2017-02-23 11:14:07 +11:00
7d8d02ab8a
Additional of v0.3.5 design files (Including BOM)
2017-02-22 17:03:24 +11:00
2e5a45463b
Additional default pins to prevent weirdness on upgrades
2017-02-21 16:51:50 +11:00
4f5d1afdae
Add more part numbers (Teensy adapter)
2017-02-20 17:58:28 +11:00
0d055dc7f1
Allow min and max duty cycles for closed loop idle and boost
2017-02-20 17:57:46 +11:00
650a096175
Initial (untested) commit of Nissan 360. ONLY support 4 cylinder so far
2017-02-12 18:35:18 +13:00
667e80dc26
Add boost target to log
2017-02-12 14:31:37 +13:00
ced30ce3a7
Remove PSI Boost option from TS
2017-02-09 14:26:21 +11:00
0fc212ec11
Remove all traces of PSI based boost targets
...
The metric conspiracy lives! Muhahahahahah
2017-02-09 14:24:07 +11:00
74137338e5
February dev signature
2017-02-09 09:54:25 +11:00
b2ca13c9aa
Merge pull request #64 from Autohome2/can-io
...
Can io
2017-02-05 21:42:33 +11:00
dd92c40af4
Base tune and signature for Jan 2017
2017-02-01 17:42:11 +11:00
294192c52c
Merge branch 'master' into master
2017-01-30 20:13:33 +11:00
425ec75828
Remove selectable pin options from being on pins 1/2 (Comms pins)
2017-01-28 08:39:10 +11:00
9011c190e0
Fix for fan hysteresis not operating correctly
2017-01-27 16:38:52 +11:00
656fc8b77a
added page 10 , a 128byte page for use with upcoming CANBUS integration.
2017-01-26 22:58:21 +00:00
ad825c2051
Allow for use of negative advance (i.e. ATDC) values for launch
2017-01-21 12:58:45 +11:00
770da8b43e
Selectable boost and VVT pins
2017-01-19 14:54:07 +11:00
2ee0a91c0b
BIG cleanup of #includes to be more C compliant
2017-01-18 17:37:55 +11:00
4c1c9a051e
Slightly improved flat shift / launch logic
2017-01-18 13:20:04 +11:00
da3f460152
Don't cutoff the decimal values of afrTarget in data logs
2017-01-18 10:24:20 +11:00
109f64f342
Memory allocation and TS interface for flat shift
2017-01-17 13:33:41 +11:00
0e176f0724
Enable MAP load values up to 511
2017-01-17 10:51:53 +11:00
6b368e998d
Add more pressure gauge options (PSI, inhg)
2017-01-16 14:41:40 +11:00
9aad63ec7c
Revised MX5 PNP board files
2017-01-16 13:49:59 +11:00
e58ad87ed2
Add check to prevent potential crash when switching IAC methods (Teensy)
2017-01-12 22:33:26 +11:00
5835c3c704
Schematic and board images for Teensy adapter
2017-01-11 18:11:31 +11:00
1b27436ed8
Initial commit of Teensy adapter board
2017-01-08 21:35:15 +11:00
6931233475
Gerbers for v0.4.3
2017-01-07 15:49:13 +11:00
efc7f024fe
Design files and BOM for v0.4.3 board
2017-01-07 10:13:13 +11:00
251000893c
Jan 17 dev signature
2017-01-06 08:26:11 +11:00
7d70f688aa
Signature and base tune for Dec 2016 release
2017-01-05 17:20:54 +11:00
7a87363618
Add MAP x RPM variable to datalog
2017-01-04 22:34:25 +11:00
6c17cde092
Better AE curve range
2017-01-01 19:56:18 +11:00
a80ff171f5
Actually remember to allow 5 cylinder selection in TS
2016-12-29 08:46:20 +11:00
6ac8807399
Global injector closing angle TS setting
...
Adding TS setting in "Injector Characteristics"
2016-12-27 13:35:46 -06:00
12ea4b1587
Minor work on the Teensy adapter board
2016-12-27 16:09:44 +11:00
b3a04cc19b
Expose some pieces of flex info to TunerStudio
2016-12-26 20:53:37 +11:00
48712c12fa
Add settings to select pins for fuel pump and fan
2016-12-21 13:21:27 +11:00
0a1a390a98
Part number updates in v0.3 and v0.4 BOMs
2016-12-19 09:46:19 +11:00
228d4e898c
Files for PVT4 of the NA6 Pro board
2016-12-15 21:55:21 +11:00
25111fc927
Slightly revised v0.4.2 schematic
2016-12-12 23:41:55 +11:00
9889a1ff18
December dev signature
2016-12-11 23:48:41 +11:00
397fb56445
Remove 2 default values that aren't used any more
2016-12-11 22:49:48 +11:00
cc6b036105
November base tune file
2016-12-05 20:48:32 +11:00
fd9a140374
Signature for November release
2016-12-05 20:44:25 +11:00
022e82d66f
Minor changes to TS AE dialog
2016-11-30 17:17:51 +11:00
049f3081b1
Complete fuel correction for flex
2016-11-28 20:37:24 +11:00
aac73d785b
Further groundwork for flex fuel adjustments
2016-11-28 16:58:24 +11:00
3a374ad361
Updated Pro design files
2016-11-27 21:48:47 +11:00
8540f64620
New flex fuel dialog
2016-11-27 21:47:22 +11:00
a097be5eb0
Add Kinetis K64 data sheet to repo
2016-11-25 08:48:58 +11:00
e7113b03a1
Enable injector angle options for cyls 3/4 when sequential is selected
2016-11-24 07:05:57 +11:00
6921107373
Development signature for Nov (Late)
2016-11-18 14:31:03 +11:00
af40812586
Allow for leading/trailing edge selection on missing tooth and dual wheel decoders
2016-11-18 14:28:33 +11:00
0aa2287fd8
Cleanup of some design files
2016-11-14 08:48:34 +11:00
de6dc2699f
Updated part numbers on 0.4.2 BOM
2016-11-11 16:45:43 +11:00
1d35374865
October base tune
2016-11-09 12:59:26 +11:00
de3ee45f7f
Signatures for October release
2016-11-08 17:05:57 +11:00
f9e226d828
Complete and tested fuel trim
2016-11-02 12:13:17 +11:00
7aeff0cbda
Further memory fixes for sequential trims
2016-11-01 23:19:16 +11:00
30a48dc364
Fixes for trim table comms misalignment
2016-11-01 12:37:00 +11:00
f0dcb0c756
Minor sequential fixes
2016-11-01 10:11:15 +11:00
0a38467fc6
Complete (untested) sequential fuel trim
2016-10-27 17:27:08 +11:00
940c3a5be7
Further memory work on the sequential tables
2016-10-27 08:49:27 +11:00
1f87c31e01
Load and save routines for the 4 fuel trim tables
2016-10-25 17:31:44 +11:00
a0db44f9ae
PVT 3 of the NA6 PNP board
2016-10-19 10:38:55 +11:00
0df9b14acd
Add MPX4400 MAP sensor calibration
2016-10-19 10:38:55 +11:00
c45d283c37
Revised images for v0.4.2 board
2016-10-17 08:58:18 +11:00
34b571226e
Further sequential work
2016-10-15 21:52:20 +11:00
241314e42d
Low res (1ms) timer enabled for Teensy
2016-10-10 22:38:40 +11:00
cb4d0b9ab6
Initial commit of sequential fuel and spark
2016-10-04 20:28:51 +11:00
a9798517e9
Development signature for Oct
2016-10-03 17:32:04 +11:00
dc40b0a0a8
More formatting changes
2016-10-01 02:06:09 +10:00
b739618ebc
Bring formatting in line with standards
2016-10-01 01:57:57 +10:00
4d0fe1836a
Merge branch 'master' into pr/46
...
Conflicts:
reference/Speeduino base tune.msq
2016-10-01 01:45:18 +10:00
509d36cf34
September base tune file
2016-09-30 22:35:41 +10:00
03c342e5fb
Cleanup of old legacy files
2016-09-30 22:04:00 +10:00
484e92a8bc
September final signature
2016-09-30 21:18:23 +10:00
f2ee98902d
Add live graph to the Accel Enrichments dialog
2016-09-30 16:11:16 +10:00
a348d20b82
Merge pull request #20 from noisymime/master
...
update with josh 29092016
2016-09-29 13:12:08 +01:00
a8da0cdd31
Delete Speeduino base tune.msq
2016-09-29 12:53:26 +01:00
cbe00edaaa
Design files for PVT3 of the MX5 board
2016-09-29 10:23:22 +10:00
8b05abcd7a
Fix incorrect scaling on odd fire angles
2016-09-28 15:03:52 +10:00
Josh Stewart
darren siepka
Autohome2
ConnerMcLaughlin