83a8fdefca
Merge pull request #126 from lsdlsd88/patch-1
...
fix cranking IAC bins in MX5 NA6 Base Tune
2018-02-12 10:09:16 +11:00
528d3193d8
changed reset control config to use a setting group
2018-02-07 18:37:21 -06:00
c1ebde3ce5
fix for NA6 PNP base tune
...
Disabling Launch control from base tune...
2018-02-07 19:59:14 +01:00
9c8fe31354
fix bins in MX5 NA6 Base Tune
...
fixing temperature bins makes possible to actually use these functions.
in the current state these points appear one over each other in Tunerstudio and you can't drag them properly.
2018-02-07 19:50:43 +01:00
8b7f0c345b
Add a loops/rev counter in TS
2018-02-05 12:44:38 +11:00
dfa48ed250
Fix for rare overflow issue that could cause an incorrect pulse width at very low RPM (<200rpm)
2018-02-05 09:39:46 +11:00
e1f2b35081
migrated the flex fuel help to the curve editors. fixed bonehead flexEnabled ini mistake
2018-01-21 15:19:04 -06:00
b5c56495e9
Merge branch 'flextable' of https://github.com/0x15e/speeduino into 0x15e-master-amalgamation
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2018-01-21 14:55:47 -06:00
9369ec73d8
Merge branch 'reset-lock' of https://github.com/0x15e/speeduino into 0x15e-master-amalgamation
...
# Conflicts:
# reference/speeduino.ini
# speeduino/globals.h
2018-01-21 14:32:51 -06:00
8e789d4644
Merge branch 'master' of https://github.com/noisymime/speeduino into flextable
...
# Conflicts:
# reference/speeduino.ini
# speeduino/globals.h
2018-01-20 18:16:19 -06:00
74fefba9c2
significantly improved the flex settings dialog
2018-01-20 18:00:56 -06:00
23862103e5
extremely rough flex table editors. added flexBoostCorrection to currentStatus. shortened flex correction table names. gave each flex table its own set of eth% bins. fixed the incredibly broken EEPROM update code.
2018-01-20 16:33:14 -06:00
264090863d
Merge pull request #118 from ConnerMcLaughlin/master
...
Launch Control TPS II
2018-01-21 07:18:51 +11:00
929756b63a
Merge branch 'master' of https://github.com/noisymime/speeduino into flextable
...
# Conflicts:
# .gitignore
# reference/speeduino.ini
# speeduino/globals.h
2018-01-19 22:24:02 -06:00
2350d5d785
Table-based flex fuel corrections
...
Changed the linear low / high flex fuel correction method to a table2D-based one.
2018-01-19 21:25:01 -06:00
d07d20ffb8
ini spec version bump to maximum supported by the current stable TunerStudio. removed debug code from comms.ino. updated ini file so that only appropriate options will be shown based on whether the connected Speeduino is using the custom firmware.
2018-01-16 20:02:04 -06:00
de45a0f506
Wiki image for Miata 9905 pattern
2018-01-17 09:39:19 +11:00
45d6780835
Merge pull request #120 from ConnerMcLaughlin/36-2+3
...
Initial commit for missing tooth secondary
2018-01-16 16:47:07 +11:00
b6096329d8
cam4minus1 var is now trigPatternSec
...
All the instances of the variable name cam4minus1 is changed to trigPatternSec
2018-01-15 20:38:37 -06:00
f0ce5a9202
Updated 36-2-2-2 signal image
2018-01-15 16:45:06 +11:00
dc0e1c7b88
Correction of choices for cam4minus1 var
...
In speeduino.ini you have to explictly show an INVALID placeholder for all the choices a constant can have. There were only 130 for cam4minus1. The numer was increased to 254.
2018-01-14 21:21:07 -06:00
52701e98ad
Initial commit for missing tooth secondary
...
This also includes setups that have Toyota 36-2+3 trigger wheels to work.
2018-01-14 20:23:25 -06:00
124c0d51da
Launch Control TPS II
...
Adding TPS limit on launch control
2018-01-14 17:42:38 -06:00
bd303bd767
replaced accidental (and misnamed) copy of arduino-dfu firmware with the correct speeduino arduino-usbserial one
2018-01-14 11:49:16 -06:00
27641514f4
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
...
# Conflicts:
# reference/speeduino.ini
2018-01-14 11:29:29 -06:00
35267f21ed
Updated bootloader that sends its version to Speeduino when TS connects
2018-01-13 09:06:12 -06:00
85c600a992
Wiki image for 36-2-2-2
2018-01-14 00:25:18 +11:00
2819adb865
Custom bootloader recognition
...
Added a new serial command that allows a custom 16u2 firmware to let the speeduino know about itself. After issuing a `, the speeduino will expect one more byte indicating the capabilities level of the custom firmware (only 1 for now).
2018-01-12 21:37:21 -06:00
dd9941ce5d
Introduce end-of-line normalization
2018-01-12 14:04:43 +11:00
819b3a1dc9
Updated parts for v4 VR conditioner
2018-01-12 13:55:27 +11:00
b83f24d253
Minor updates to adapters fzz files
2018-01-12 13:54:56 +11:00
d49d8f5fb7
SpeedyMAP initial work on RPM detection
2018-01-12 13:54:31 +11:00
c8badf88b8
Update to v0.4.4 BOM to replace EOL part
2018-01-12 13:53:43 +11:00
2c5ab994f5
Mostly complete SpeedyMAP firmware
2018-01-10 22:37:31 +11:00
81d8ccd358
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-09 18:20:47 -06:00
6c8e238697
January dev signature
2018-01-10 00:11:57 +11:00
93a1ae989f
Initial rough work on Speedy MAP
2018-01-09 08:46:46 +11:00
3db8319320
Atmega16u2 firmware that supports reset control
...
With this firmware installed, auto reset on DTR will only work if PINB7 is held LOW.
2018-01-07 16:50:40 -06:00
43f0d35839
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-07 16:22:55 -06:00
ae8ea08d41
Reset Control
...
Changed reset lock feature to a more general "reset control" feature. Moved reset control settings to the general Settings menu. added a serial U command that will halt comms and set the control pin low when another byte is received to facilitate reset control for devices that lack an AtmegaXXu2 usb controller. Improved context help for reset control. Corrected reset lock status indicator on / off labels. moved reset control setup to utils.ino.
2018-01-07 16:22:18 -06:00
f474a95dc5
December 2017 signature and base tunes
2018-01-03 21:52:25 +11:00
9f53002b9d
Adjust injector setting priority so that sequential will override the Simultaneous/Alternating option
2018-01-03 17:27:22 +11:00
03e6c2d476
Software controlled auto-reset prevention
...
This feature enables the Speeduino to set a pin high that will tell the Arduino's 8U2/16U2 firmware not to reset on new serial connections. This requires a slightly modified firmware for the 8U2/16U2 that will only reset on DTR when PB7 is also held low.
2018-01-01 15:39:43 -06:00
507ebc83d6
Files for v0.3.7 board (Adds bluetooth header)
2017-12-30 08:35:20 +11:00
8feb7ae521
Fix typo in ini
2017-12-21 23:06:09 +11:00
38dfb2d8f6
Fix for timing bug on Miata 99-05 pattern
2017-12-21 13:30:45 +11:00
c93f735036
Staging wiki images
2017-12-18 08:48:00 +11:00
36c08d42cc
Initial layout work for 36-2-2-2 decoder
2017-12-15 16:38:17 +11:00
8fe7ff66a9
December dev signature
2017-12-15 16:23:56 +11:00
aebe4d2719
November signature and base tunes
2017-12-10 17:21:55 +11:00
98ea973a80
Add individual pulse widths to the comms output
2017-12-07 11:42:44 +11:00
7685316703
Files for the v3 VR conditioner
2017-12-05 13:02:39 +11:00
703d78ffe5
Remove unused parts from the Beta 2 PNP BOM
2017-12-05 13:02:18 +11:00
1e432514f9
Allow separate bars calibration
2017-11-28 10:09:54 +11:00
2989e32f15
Memory adjustments for staging fuel table
2017-11-21 15:17:55 +11:00
74c65900a8
Updated images for v0.3.6
2017-11-20 09:12:01 +11:00
f33455229d
Change encoding used on ini file so the latest TS beta (3.0.50.17) can read it
2017-11-16 15:15:47 +11:00
36ca95a330
November dev signatures
2017-11-13 09:14:58 +11:00
bd9a445292
Wiki image for rotary settings
2017-11-12 21:49:14 +11:00
eead290bc6
Fix incorrect part designation on the MX5 PNP B2 BOM
2017-11-09 10:07:10 +11:00
883ba4a25f
Potential fix for access enrich overflow
2017-11-08 22:51:40 +11:00
fa5d721b98
October release signatures and base tune
2017-11-07 22:13:27 +11:00
cfb8d20f4e
Fix problem with the AFR correction ignition count not being checked correctly
2017-11-05 19:56:04 +11:00
4b5b040615
Merge pull request #110 from Autohome2/can-serial3
...
Can serial3 updates
2017-11-03 00:00:53 +11:00
380ffc20b8
update serial3 and canbus related data transfer protocols and naming
2017-11-01 20:17:47 +00:00
17030a9df7
Add in check for ignition count to the closed loop AFR control
2017-11-01 16:10:06 +11:00
c7a78ae44f
Fix duty cycle calculation when sequential fuel is used (+formatting of ini)
2017-11-01 13:33:39 +11:00
db720bfba0
MX5 PNP Beta 2 files
2017-10-26 23:14:39 +11:00
a1e8b9c874
Updated v0.4 image for wiki
2017-10-26 16:37:37 +11:00
b67ae45b69
Added NO2C pin mapping
...
Closes #106
2017-10-25 20:55:46 +11:00
4b20e61eb7
v0.3.6b files (Minor silkscreen and routing improvements)
2017-10-25 16:49:42 +11:00
1a86a738ed
Add ignition dwell gauge in TS
2017-10-24 21:10:47 +11:00
2ec972948f
Changes to logged variables
2017-10-24 16:54:18 +11:00
6a8ab1015b
Move the pulse width function into the speeduino.h scope
2017-10-24 14:08:32 +11:00
ac4a36529b
Cleanup work in the ini
2017-10-23 22:42:09 +11:00
e921901fc0
Pass fuel pulse width full value to TS
2017-10-10 21:58:03 +11:00
b93b0939ac
Revised boost setting image
2017-10-10 19:56:45 +11:00
91a428401a
October dev signature
2017-10-10 19:56:37 +11:00
b067ef100b
Signature and base tunes for Sep 2017 release
2017-10-09 12:02:05 +11:00
9202afe7cf
Prevent memory corruption from the page expansion
2017-10-04 12:24:40 +11:00
fcac8b731d
Minor tweaks to v0.3.6 BOM
2017-10-04 10:44:45 +11:00
44f4538d40
Updated design file for v3 of VR conditioner
2017-10-04 10:44:18 +11:00
57d4ee614a
Non-final version of Beta2 MX5 PNP
2017-10-04 10:43:39 +11:00
683fe44562
Initial work on rolling sign cut rev limit
2017-10-04 09:48:46 +11:00
172cd18435
Add explicit on/off mode for the VVT table
2017-10-02 20:01:08 +11:00
ed0908469a
Revised MX5 fuel pump image for wiki
2017-10-01 22:11:19 +11:00
b2552202b2
Draft image for fuel pump jumper on MX5
2017-10-01 00:37:25 +10:00
a54c7f3a8d
Final design files of the V3 VR conditioner
2017-10-01 00:10:26 +10:00
c901748974
Allow use of Analog pins for some selectable outputs
2017-10-01 00:07:36 +10:00
9774a60d7f
Updated files for v0.4.3b
2017-09-22 22:14:55 +10:00
7aa8d277f3
Potential fix for cranking problem on Miata 9905 pattern
2017-09-20 16:43:55 +10:00
9d89494666
Expand page 4 to 128 bytes
2017-09-20 12:15:41 +10:00
1cd2a0f296
Expand page 2 to 128 bytes in size
2017-09-19 15:09:32 +10:00
5b3df5ac4d
Merge config pages 6 and 7
2017-09-19 14:51:33 +10:00
6763ff15b4
Initial work on new serial comms protocols (Working, but slow)
2017-09-19 14:10:07 +10:00
1fa85bbbdb
Change wording on boost cut indicator
2017-09-18 10:41:00 +10:00
a1fa406cdd
Minor BOM changes
2017-09-13 08:13:17 +10:00
2d03665162
Remove unused odd fire variable
2017-09-12 14:02:00 +10:00
0694564ed1
September dev signature
2017-09-10 00:51:10 +10:00
d8d1d8ff04
August signature and base tune
2017-09-09 22:07:46 +10:00
7c0932a396
Adjust boost timings slightly
2017-09-07 06:20:22 +10:00
4e858f1ca8
Completed new PID mode for boost control
2017-09-04 11:50:55 +10:00
3b33094230
Initial commit of new Ideal PID implementation (Active for boost control)
2017-09-03 20:28:49 +10:00
bd54aae566
Enable per tooth timing on Nissan 360
2017-08-31 21:04:32 +10:00
e7ac717796
Startup improvements on Nissan 360 CAS
2017-08-31 18:01:37 +10:00
282f3a84aa
Wiki images
2017-08-31 14:42:37 +10:00
bb8807bbcd
SCAD file for PCB locator used on the PNP units
2017-08-31 14:42:20 +10:00
e93bf9f5ac
Fix RPM calc issue on Miata 99-05
2017-08-30 12:53:56 +10:00
a44f36b58c
Small cleanup in ini
2017-08-29 14:18:56 +10:00
8286cf0ac4
Initial commit of v3 VR conditioner files
2017-08-27 19:20:45 +10:00
4e47e8ae19
Cleanup page 11 array
2017-08-25 17:26:04 +10:00
fc06ce4d1b
Minor ini and comms cleanup
2017-08-24 17:24:28 +10:00
7db1101429
Completely untested trailing spark for FC rotary ignitions
...
May God have mercy on us all
2017-08-23 17:18:59 +10:00
f9609afeb9
Correct wrong resistor value on v0.4.3 schematic (BOM was correct)
2017-08-23 08:46:06 +10:00
539618c583
Initial interface work on rotary ignition modes
2017-08-23 08:14:11 +10:00
c791302a0e
Harley EVO decoder (courtesy of @bitwise17)
...
Closes #93
Slightly changed to fix bugs and be MISRA compliant
2017-08-17 14:17:21 +10:00
77094a59d1
Better startup procedure and DIY watchdog
2017-08-17 11:24:26 +10:00
7bb3642e14
Honda D17 tooth pattern
2017-08-10 17:07:46 +10:00
c8f08ddcbc
Wiki image for Daihatsu +1
2017-08-10 16:49:58 +10:00
345bf5d405
August dev signatures
2017-08-06 22:15:15 +10:00
be9ad6bb85
Fix missing value for TPS calibration
2017-08-06 17:12:57 +10:00
4f7e11c233
Fix for spark miss every ~250 revs
2017-08-06 17:00:58 +10:00
037c84039f
Added wiki image for updating page
2017-08-06 16:29:00 +10:00
a60e9397e6
MX5 PNP sensor calibration image
2017-08-05 11:11:53 +10:00
6727b0a750
Activate per tooth timing on dual wheel
2017-08-01 09:39:50 +10:00
523c05fda9
July signature and base tune
2017-07-30 23:07:48 +10:00
9cd31f335f
Cleanup of comms variables
2017-07-27 14:04:38 +10:00
3db9dc99fd
New MAP calculation method (More accurate and allows negative calibration values)
2017-07-27 12:47:59 +10:00
b42d0069ab
Clean up cranking enrichment dialog
2017-07-25 20:42:06 +10:00
e16da51101
Additional work for the new memory page
2017-07-24 14:19:07 +10:00
ccb6e194b7
Initial work creating a new memory page (pg 11)
2017-07-20 16:54:50 +10:00
9d2e938a4d
Initial (mostly untested) live baro reading
2017-07-17 17:06:14 +10:00
905a8642ff
July dev signature
2017-07-17 16:36:44 +10:00
e5591bc7bc
June signature and base tune
2017-07-11 16:21:44 +10:00
a9891ad38c
Fix name of Lambda entry in the log
2017-07-10 11:56:28 +10:00
7e5fb7bb5c
VR conditioner BOM template updates
2017-07-07 09:26:13 +10:00
3d2a692d53
Change freeRam() to unsigned int
2017-07-07 09:26:13 +10:00
1f03499725
further cleanup of ini and msq
2017-07-05 16:02:07 +01:00
d7f374b473
Merge dazq CAN changes
...
Closes #91
2017-07-05 22:28:11 +10:00
5992e31f2f
Experimental commit of per tooth based ignition timing
2017-07-03 18:39:10 +10:00
7f86b91198
Add fields to allow custom MAP sensors being entered
2017-07-03 12:14:07 +10:00
f67f24f16d
Merge pull request #89 from Autohome2/can_io_2
...
External devices over serial3 update
2017-07-02 22:40:45 +10:00
c00b7b597e
Minor correction to MX5 BOM
2017-06-30 16:51:06 +10:00
0637138979
Minor MX5 PNP schematic cleanup
2017-06-30 16:44:10 +10:00
874787a5a9
Updated BOM templates
2017-06-29 14:29:13 +10:00
3b8ab80897
End plate files for the MX5 PNP
2017-06-28 12:06:33 +10:00
652624b288
Add initial Daihatsu +1 decoder (also 3 cylinder sequential ignition)
2017-06-26 17:34:10 +10:00
695bc43197
Teensy adapter PVT3 files
2017-06-20 23:45:00 +10:00
8db13859e1
Merge branch 'master' into can_io_2
2017-06-20 02:44:51 +01:00
0ea42483d0
Merge branch 'can_io_2' of https://github.com/Autohome2/speeduino into can_io_2
2017-06-20 02:30:37 +01:00
35dfa6395d
support read values(16channel) from gpio or other external device . other device can also access the speeduino data values(realtime)
...
all via serial3
2017-06-20 02:29:55 +01:00
5c25590f82
Fix warnings for PSIG :)
2017-06-14 18:07:06 +10:00
7c36ff853b
Gerber files for v2 of Teensy adapter
2017-06-13 17:06:25 +10:00
244b7a068e
Add missing pin mapping for stepper on Teensy adapter
2017-06-13 17:05:02 +10:00
1a72d50985
Merge pull request #40 from noisymime/master
...
update 13062017
2017-06-13 03:16:31 +01:00
0296f06438
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 03:02:50 +01:00
3065620606
MX5 wiki images
2017-06-12 12:03:38 +10:00
ae7a75673f
June dev signature
2017-06-06 08:32:08 +10:00
4f62900cba
May base tune file
2017-06-05 14:41:58 +10:00
02564d3218
May signature
2017-06-05 14:28:28 +10:00
3dd5ab7370
Tentatively working lambda option
2017-05-27 22:16:42 +10:00
98c3a51ec2
WUE VEAL testing added (Currently disabled)
2017-05-26 13:09:19 +10:00
a106ea72ca
Have the missing tooth decoder use the cranking specific RPM calc
2017-05-20 21:55:50 +10:00
535756f656
MX5 PNP board Beta 1
2017-05-17 19:58:58 +10:00
fbde19253f
Clear cranking and WUE bits when engine speed drops to 0rpm
2017-05-16 22:01:33 +10:00
81c548a9e8
Tentative 6 cylinder support (3000GT) added to 4G63 decoder
...
Requested in #76
Needs testing. Select the decoder and set cylinders to 6.
Note that the Medium and Aggressive trigger filters do NOT currently
work for 6 cylinders and should not be used.
2017-05-16 16:49:35 +10:00
1db7be4a33
Flex fuel boost adder
2017-05-12 18:14:14 +10:00
bcd7b29b59
Merge pull request #86 from Autohome2/can-serial3
...
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 21:53:19 +10:00
2d72de80e0
More wiki images
2017-05-11 09:56:20 +10:00
bffb4fb72f
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 00:08:24 +01:00
39427c9275
Wiki images
2017-05-10 23:42:59 +10:00
cfebe84514
Belated May dev signature
2017-05-10 13:55:26 +10:00
a7460f93d2
Merge pull request #85 from Autohome2/can-serial3
...
serial3 and canbus integration improvements
2017-05-10 12:15:29 +10:00
04a6866115
Allow spark advance values below 0 in the main table
2017-05-09 17:29:55 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
db147b5ccb
Updated v0.4.3 BOM with in-stock part numbers
2017-05-08 09:40:46 +10:00
8aebd102f6
Updated v0.3.6 BOM with latest in-stock part numbers
2017-05-08 09:17:43 +10:00
b0d0c40bec
April signature and base tune
2017-05-06 23:43:57 +10:00
2004034674
Add CRC stack for testing (Currently unused)
2017-05-05 08:52:10 +10:00
fca0a7ecbd
BOM for v0.3.6
2017-05-03 07:36:52 +10:00
88c3cb0167
A couple more wiki images
2017-05-03 07:08:36 +10:00
eaabc2f3ce
Final v0.3.6 design files
2017-05-03 07:08:23 +10:00
fa9f418c35
Resolve all pr/77 conflicts
2017-05-02 21:17:33 +10:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
4f9c60b75e
Final design files for v0.4.4-SMD
2017-04-30 08:32:47 +10:00
6bc724547e
More image tests
2017-04-27 23:05:58 +10:00
6700a89731
Test wiki image
2017-04-27 22:57:14 +10:00
9b58da838c
More wiki images
2017-04-27 22:24:04 +10:00
bb157edf5f
Whole bunch of wiki images
2017-04-26 18:44:53 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
71e963e196
Log dwell as a float rather than an int
2017-04-22 10:03:10 +10:00
538bc5f0bf
Initial commit of dwell limiting when it exceeds maximum time in revolution
2017-04-21 17:29:09 +10:00
1f38836db0
New revision of MX5 interface board
2017-04-16 22:08:17 +10:00
ac37fafc84
April dev firmware
2017-04-15 08:40:29 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
fa83faa2f0
Part number tweaks for v0.4.3 board
2017-04-06 22:47:29 +10:00
9cc1114334
Part number tweaks for v0.3.5 board
2017-04-06 22:17:13 +10:00
57aa06634f
PCBA templates for the VR conditioner
2017-04-06 21:54:41 +10:00
7b2a900c06
Some initial files for the SMT 0.4.4 board
2017-04-06 21:07:28 +10:00
ecd62735fc
Endplate 3D files for MX5 PNP case/board
2017-04-06 20:38:47 +10:00
Josh Stewart
Murray
lsdlsd88
ConnerMcLaughlin
darren siepka
Autohome2