e51968fe04
Minor pin mapping revisions and updated base tune
2015-05-22 07:22:22 +10:00
13c61026cb
Additional modular decoder work
2015-05-18 22:46:22 +10:00
a6eed4a18f
Allow for trigger angle setting to 1 degree (NEED INI FILE RELOAD!!)
2015-05-16 22:06:05 +10:00
08254912de
Correctly flag all variables that require a restart
2015-05-06 09:22:02 +10:00
b665b05133
Add annitated v0.3 board diagram
2015-05-01 14:11:06 +10:00
d6b72ec527
Sane values for MAP temperature correction curve
2015-04-28 13:06:23 +10:00
128942aca6
Actually use the dwell correction curve in the code
2015-04-22 16:49:10 +10:00
666da25d06
Cropped v0.3 board image
2015-04-22 00:07:57 +10:00
03da71da05
Mix missing label in v0.3 BOM
2015-04-22 00:07:34 +10:00
39c634951f
Add missing label for R41 in the BOM
2015-04-19 20:40:52 +10:00
4aff435550
Minor revisions to BOM for v0.3 board
2015-04-18 22:52:20 +10:00
959965cb0d
Fix incorrect part number on 680 Ohm resistors
2015-04-14 21:42:59 +10:00
13f4d9b131
Remove extra byte that shouldn't have been in one of the config pages
2015-04-10 17:26:38 +10:00
234612ad04
Add battery voltage correction code
2015-04-04 21:10:13 +11:00
3f2cd5cad3
Semi-sequential injector timing
2015-03-24 20:06:19 +11:00
d662611710
Add Plazomat 0.1 mapping
2015-03-24 13:11:34 +11:00
fb86e5fca6
Add injector vs voltage compensation curve
2015-03-21 10:41:53 +11:00
eb0f928663
Add curve for battery dwell compensation
2015-03-20 15:13:16 +11:00
7556ff5a2c
Correct EEPROM mapping of final 2 bytes in a page
...
Note that this commit may cause strange behaviour the first time it is
loaded within Tuner Studio. You need to ensure you reload the values
from Tuner Studio
2015-03-20 15:12:47 +11:00
bc8c9ed441
Add pin mapping for Turtana board
2015-03-20 00:35:41 +11:00
50e36b2a79
Minor updates to v0.3 BOM and silkscreen
2015-03-16 23:38:23 +11:00
f97a60eb35
Add config option to set the board layout being used
2015-03-15 22:54:47 +11:00
cbbb280f3c
Allow OLED display options to be configured live
2015-03-02 11:11:47 +11:00
fee967d23f
Initial I2C OLED display work. Functioning.
2015-03-01 08:27:16 +11:00
c121ae1e92
Cleanup v0.3 schematic
2015-02-25 19:55:32 +11:00
31b5ff5e37
Adjust pulse width comms accuracy
2015-02-25 13:11:44 +11:00
6a938da6df
BOM for v0.3 board
2015-02-18 12:27:38 +11:00
f823b2b7a7
Final (Hopefully) v0.3 gerbers
2015-02-18 07:56:40 +11:00
cc0bf6d569
Better base tune file
2015-02-17 16:33:03 +11:00
a8e7066b41
Fixes and performance improvements to TAE
2015-02-17 16:31:26 +11:00
9b4e729498
Minor updates to v0.3 board, including a possible resizing version
2015-02-15 21:35:17 +11:00
3d5377cbca
Fix for typo in v0.2 BOM
2015-02-15 21:34:56 +11:00
38778c0c49
Updates and pics for wiki documentation
2015-02-13 23:12:00 +11:00
9ec4abd47c
Fix missing ground for the OLED
2015-02-13 00:10:07 +11:00
ac56baafa2
Likely final v0.3 files
2015-02-12 23:15:27 +11:00
a9b1923cb9
Add EEPROM to v0.3 for potential future use with Due
2015-02-11 23:33:30 +11:00
e013a17445
Include i2c OLED on v0.3 board
2015-02-11 22:48:48 +11:00
505c9299cd
Complete and tested over dwell protection
2015-02-10 11:14:24 +11:00
d6a30f322a
Untested dwell limit/protection implementation
2015-02-10 00:19:58 +11:00
8432b81ec3
Add overdwell UI interface to ini
2015-02-10 00:02:13 +11:00
39cdb0a316
High resolution RPM logging
2015-02-07 13:50:23 +11:00
ae6b28fd81
Accel/Decel gauge fixed
2015-02-07 12:09:50 +11:00
8523472e42
Add true cranking enrichment (As opposed to ASE)
2015-02-07 08:29:51 +11:00
b92987971b
Fix soft limiter scaling error
2015-02-06 17:38:59 +11:00
fef3e11643
Addition of 3D tables menu
2015-02-06 08:11:00 +11:00
56fea1e7c4
Add afrTarget output channel
2015-02-06 07:54:33 +11:00
af5ef6295d
Rename old base tune to ...v0.1
2015-02-03 18:04:03 +11:00
cbf64387c4
New base tune for 0.2 ini
2015-02-03 18:01:18 +11:00
eba736ba11
New version of ini file to cover afr targets
2015-02-03 17:25:43 +11:00
76434d2014
Minor cleanups in TS
2015-01-28 17:03:40 +11:00
Josh Stewart