49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
b0d0c40bec
April signature and base tune
2017-05-06 23:43:57 +10:00
2004034674
Add CRC stack for testing (Currently unused)
2017-05-05 08:52:10 +10:00
fca0a7ecbd
BOM for v0.3.6
2017-05-03 07:36:52 +10:00
88c3cb0167
A couple more wiki images
2017-05-03 07:08:36 +10:00
eaabc2f3ce
Final v0.3.6 design files
2017-05-03 07:08:23 +10:00
fa9f418c35
Resolve all pr/77 conflicts
2017-05-02 21:17:33 +10:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
4f9c60b75e
Final design files for v0.4.4-SMD
2017-04-30 08:32:47 +10:00
6bc724547e
More image tests
2017-04-27 23:05:58 +10:00
6700a89731
Test wiki image
2017-04-27 22:57:14 +10:00
9b58da838c
More wiki images
2017-04-27 22:24:04 +10:00
bb157edf5f
Whole bunch of wiki images
2017-04-26 18:44:53 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
71e963e196
Log dwell as a float rather than an int
2017-04-22 10:03:10 +10:00
538bc5f0bf
Initial commit of dwell limiting when it exceeds maximum time in revolution
2017-04-21 17:29:09 +10:00
1f38836db0
New revision of MX5 interface board
2017-04-16 22:08:17 +10:00
ac37fafc84
April dev firmware
2017-04-15 08:40:29 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
fa83faa2f0
Part number tweaks for v0.4.3 board
2017-04-06 22:47:29 +10:00
9cc1114334
Part number tweaks for v0.3.5 board
2017-04-06 22:17:13 +10:00
57aa06634f
PCBA templates for the VR conditioner
2017-04-06 21:54:41 +10:00
7b2a900c06
Some initial files for the SMT 0.4.4 board
2017-04-06 21:07:28 +10:00
ecd62735fc
Endplate 3D files for MX5 PNP case/board
2017-04-06 20:38:47 +10:00
70282e329c
Some wiki images
2017-04-05 09:48:24 +10:00
5d031a0fc9
Signature and base tune for March
2017-04-03 16:12:24 +10:00
34b9adb777
Add stepper idle disable function for DRV8825
2017-04-02 21:17:29 +10:00
676a001fb8
Initial commit of Subaru 6/7 (Likely has bugs)
2017-03-31 22:39:33 +11:00
822c400c01
Fix for potentially wrong initialisation of the on/off idle control
2017-03-30 00:01:52 +11:00
e96feaa560
Add VW/Audi/Porsche MAP sensor
2017-03-29 20:51:11 +11:00
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
d1d5bfe665
Bunch of images for the wiki
2017-03-22 17:17:36 +11:00
8fc87e062a
Fixes for closed loop stepper idle (Now ready for wider testing)
2017-03-22 12:44:22 +11:00
697e3a2c17
Add option to disable resync once every cycle (Dual wheel, Audi 135 and 4G63)
2017-03-21 17:19:07 +11:00
880947746f
Many small updates to the idle system (Including additional logging)
2017-03-20 22:29:42 +11:00
c28547dc3a
Add a bunch more values to the log output (Including boost duty)
2017-03-16 18:17:12 +11:00
fc265919df
Add new logos for wiki
2017-03-14 00:07:03 +11:00
35e67e5ee6
Fix incorrect memory addresses in ini for boost and flex
...
Fix still required for developer brain fart.
2017-03-13 17:02:54 +11:00
31836511a3
Initial closed loop stepper idle (Not quite complete)
2017-03-10 20:34:39 +11:00
abef8df43f
Fix warnings in TS due to unterminated sentences
2017-03-10 13:16:56 +11:00
74cf93b979
add test modes to injector and spark outputs
2017-03-10 00:46:11 +00:00
d686364e69
March dev signature
2017-03-08 13:19:30 +11:00
a0ede949b7
Base tune and signature update for Feb release
2017-03-03 12:51:34 +11:00
707d65cac8
Shuffle around memory to make upgrades simpler
2017-02-26 16:33:03 +11:00
16cfe02533
Revised v0.4.2 schematic to fix incorrect labels. Cleanup of folders for v0.4
2017-02-24 08:32:46 +11:00
79323b197f
Revised v0.3.5 schematic + images. Fixed 1resistor reference in BOM
2017-02-23 11:14:07 +11:00
7d8d02ab8a
Additional of v0.3.5 design files (Including BOM)
2017-02-22 17:03:24 +11:00
2e5a45463b
Additional default pins to prevent weirdness on upgrades
2017-02-21 16:51:50 +11:00
4f5d1afdae
Add more part numbers (Teensy adapter)
2017-02-20 17:58:28 +11:00
0d055dc7f1
Allow min and max duty cycles for closed loop idle and boost
2017-02-20 17:57:46 +11:00
darren siepka
Josh Stewart