81c548a9e8
Tentative 6 cylinder support (3000GT) added to 4G63 decoder
...
Requested in #76
Needs testing. Select the decoder and set cylinders to 6.
Note that the Medium and Aggressive trigger filters do NOT currently
work for 6 cylinders and should not be used.
2017-05-16 16:49:35 +10:00
1db7be4a33
Flex fuel boost adder
2017-05-12 18:14:14 +10:00
bcd7b29b59
Merge pull request #86 from Autohome2/can-serial3
...
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 21:53:19 +10:00
bffb4fb72f
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 00:08:24 +01:00
cfebe84514
Belated May dev signature
2017-05-10 13:55:26 +10:00
a7460f93d2
Merge pull request #85 from Autohome2/can-serial3
...
serial3 and canbus integration improvements
2017-05-10 12:15:29 +10:00
04a6866115
Allow spark advance values below 0 in the main table
2017-05-09 17:29:55 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
b0d0c40bec
April signature and base tune
2017-05-06 23:43:57 +10:00
fa9f418c35
Resolve all pr/77 conflicts
2017-05-02 21:17:33 +10:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
71e963e196
Log dwell as a float rather than an int
2017-04-22 10:03:10 +10:00
538bc5f0bf
Initial commit of dwell limiting when it exceeds maximum time in revolution
2017-04-21 17:29:09 +10:00
ac37fafc84
April dev firmware
2017-04-15 08:40:29 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
5d031a0fc9
Signature and base tune for March
2017-04-03 16:12:24 +10:00
34b9adb777
Add stepper idle disable function for DRV8825
2017-04-02 21:17:29 +10:00
676a001fb8
Initial commit of Subaru 6/7 (Likely has bugs)
2017-03-31 22:39:33 +11:00
822c400c01
Fix for potentially wrong initialisation of the on/off idle control
2017-03-30 00:01:52 +11:00
e96feaa560
Add VW/Audi/Porsche MAP sensor
2017-03-29 20:51:11 +11:00
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
8fc87e062a
Fixes for closed loop stepper idle (Now ready for wider testing)
2017-03-22 12:44:22 +11:00
697e3a2c17
Add option to disable resync once every cycle (Dual wheel, Audi 135 and 4G63)
2017-03-21 17:19:07 +11:00
880947746f
Many small updates to the idle system (Including additional logging)
2017-03-20 22:29:42 +11:00
c28547dc3a
Add a bunch more values to the log output (Including boost duty)
2017-03-16 18:17:12 +11:00
35e67e5ee6
Fix incorrect memory addresses in ini for boost and flex
...
Fix still required for developer brain fart.
2017-03-13 17:02:54 +11:00
31836511a3
Initial closed loop stepper idle (Not quite complete)
2017-03-10 20:34:39 +11:00
abef8df43f
Fix warnings in TS due to unterminated sentences
2017-03-10 13:16:56 +11:00
74cf93b979
add test modes to injector and spark outputs
2017-03-10 00:46:11 +00:00
d686364e69
March dev signature
2017-03-08 13:19:30 +11:00
a0ede949b7
Base tune and signature update for Feb release
2017-03-03 12:51:34 +11:00
707d65cac8
Shuffle around memory to make upgrades simpler
2017-02-26 16:33:03 +11:00
2e5a45463b
Additional default pins to prevent weirdness on upgrades
2017-02-21 16:51:50 +11:00
0d055dc7f1
Allow min and max duty cycles for closed loop idle and boost
2017-02-20 17:57:46 +11:00
650a096175
Initial (untested) commit of Nissan 360. ONLY support 4 cylinder so far
2017-02-12 18:35:18 +13:00
667e80dc26
Add boost target to log
2017-02-12 14:31:37 +13:00
ced30ce3a7
Remove PSI Boost option from TS
2017-02-09 14:26:21 +11:00
0fc212ec11
Remove all traces of PSI based boost targets
...
The metric conspiracy lives! Muhahahahahah
2017-02-09 14:24:07 +11:00
74137338e5
February dev signature
2017-02-09 09:54:25 +11:00
b2ca13c9aa
Merge pull request #64 from Autohome2/can-io
...
Can io
2017-02-05 21:42:33 +11:00
dd92c40af4
Base tune and signature for Jan 2017
2017-02-01 17:42:11 +11:00
294192c52c
Merge branch 'master' into master
2017-01-30 20:13:33 +11:00
425ec75828
Remove selectable pin options from being on pins 1/2 (Comms pins)
2017-01-28 08:39:10 +11:00
9011c190e0
Fix for fan hysteresis not operating correctly
2017-01-27 16:38:52 +11:00
656fc8b77a
added page 10 , a 128byte page for use with upcoming CANBUS integration.
2017-01-26 22:58:21 +00:00
ad825c2051
Allow for use of negative advance (i.e. ATDC) values for launch
2017-01-21 12:58:45 +11:00
770da8b43e
Selectable boost and VVT pins
2017-01-19 14:54:07 +11:00
2ee0a91c0b
BIG cleanup of #includes to be more C compliant
2017-01-18 17:37:55 +11:00
4c1c9a051e
Slightly improved flat shift / launch logic
2017-01-18 13:20:04 +11:00
Josh Stewart
darren siepka