7270b0b664
Inclusion of spark tracking byte
2015-02-10 00:01:46 +11:00
ea647441d3
Honour dwellCrank
2015-02-07 18:16:08 +11:00
5edf3f0699
Fix for potential missed schedules when the start time occurs at a point in the future closer than the next main loop
2015-02-06 21:18:35 +11:00
7a3996d6e0
Initial code for the closed loop algorithm
2015-02-06 08:11:33 +11:00
ca67510e70
Minor cleanup of pulsewidth calc.
2015-02-04 11:52:01 +11:00
e62231fb06
All the code infrastructure for the AFR target table
2015-02-03 21:33:22 +11:00
9c920f060b
Revert fastMap usage
2015-01-30 23:51:01 +11:00
965b6d89eb
Performance tweaking
2015-01-28 19:31:09 +11:00
2d9484731a
Fix 10x error in TAE check
2015-01-28 13:04:23 +11:00
e00e29144d
Add serial buffer threshold check to avoid potential overflow
2015-01-26 19:40:48 +11:00
3c934962aa
Enable WUE
2015-01-19 09:10:01 +11:00
2f94559101
Experimental temperature fix
2015-01-12 23:23:43 +11:00
45e4cb6466
Fixed missing temp offset on the comms signal
2015-01-12 21:23:25 +11:00
8eb6530044
Untested support for 3 cylinder engines
2015-01-03 09:09:19 +11:00
c0e0e73639
Experimental change to the PW calc
2014-12-30 16:23:18 +11:00
6ec1d3fedf
Use injector open time from TS rather than hardcoded
2014-12-30 11:12:01 +11:00
7d7bd02922
Fix occasional RPM flutter
2014-12-24 10:25:40 +11:00
81cfec3e2d
Minor tweaks to startup and cranking
2014-12-23 20:27:46 +11:00
72ec1179b0
New calibration values for O2
2014-12-23 18:05:52 +11:00
e98dba1f98
Enable basic corrections
2014-12-21 22:43:30 +11:00
6c861939ee
Better decoding of -2 wheels
2014-12-21 21:00:44 +11:00
28f1285a55
Fix for potential weirdness on 2nd outputs in some cases
2014-12-19 11:25:53 +11:00
fcd700b6f9
Further testing on the calibration receives from TS (Partially Broken)
2014-12-16 00:34:02 +11:00
838f0ee5c7
New sensor calibration system - Mostly working (With limitations)
2014-12-11 10:21:59 +11:00
6612e6bcf8
Fix potential overflow with low RPM schedules
2014-12-09 15:32:02 +11:00
3c325a7190
Minor changes to ini for logging and input checks
2014-11-17 22:20:40 +11:00
f9a1a29fde
Correctly pull in battery reference voltage (And report in TS)
2014-10-15 11:49:11 +11:00
67b4c2247b
Fix for potential overflow of the req_fuel figure
2014-10-10 16:39:38 +11:00
8a5888edc3
Seemingly working TunerStudio tooth logger
2014-10-03 14:19:37 +10:00
0bd13361dd
Trigger angle fix for byte division in serial comms
2014-09-22 20:15:50 +10:00
f1a94642c0
Initial tooth logging
2014-09-22 09:07:34 +10:00
86d163a072
Tweaks to PW calcs
2014-09-22 05:52:32 +10:00
f81294fae3
Disable corrections for now
2014-09-21 08:46:04 +10:00
dee88e2340
Add corrections output channel + RPM logic change
2014-09-21 08:17:14 +10:00
ea84f4d5eb
Revert use of fastMap
2014-09-17 21:41:33 +10:00
1a9ad33e3a
Honour the fixed timing angle setting
2014-09-15 09:08:20 +10:00
9d8d4b278d
Fix compiler warning
2014-09-09 13:59:27 +10:00
601e7ed541
Addition of v0.2 pin mappings
2014-09-04 08:19:17 +10:00
9022f6e8ff
Initial code for cranking staging
2014-08-25 22:03:57 +10:00
eadd5e53b2
Appropriate MAP mapping for MPX4250
2014-07-17 23:42:06 +10:00
b0cdc7639c
Changed the triggerFilterTime to be dynamic based on max rpm
2014-07-08 09:05:32 +10:00
d306e8aee7
Tweak trigger filter time to better value for 36-1
2014-07-07 22:48:50 +10:00
c463aaa6d5
Minor changes to the injector schedules
...
Trying to track down source of injector weirdness that was reported.
Can’t see anything odd, but maybe related to multiple schedules running
concurrently.
2014-07-06 21:50:02 +10:00
f17c66fe6c
Fix for math error on crank timing optimisation
2014-06-30 13:04:55 +10:00
82d6ede7b8
Injector timing math tweaks
2014-06-30 00:32:22 +10:00
0943415f8a
Fix for cylinder setting from TunerStudio
2014-06-29 19:36:29 +10:00
ed592f9416
Clean ups to remove some of the compiler warnings
2014-06-06 11:29:43 +10:00
2ff9c42797
Revert use of div() for the RPM calc
2014-05-27 20:36:54 +10:00
3bddf83da5
Bring in rudimentary multi cylinder support
...
1, 2 and 4 cyls now supported in batch/semi-sequential and wasted
spark.
2014-05-27 10:06:02 +10:00
6c20f6d5b8
Add free mem gauge and output channel (Disable testing mode)
2014-05-12 21:50:02 +10:00
Josh Stewart