* Added PWM Fan functionality
PWM Fan output for Teensy and STM32
* Teensy3.5 timer fix for PWM Fan.
* Fix the conflicts with incorporate AFR
* Possibility to use PWM fan on mega too
Not tested at this stage!! Do not merge yet.
* Fix log entry size
* Remove duplicate stuff and use same way off toggling fan
* Fix typo errors
* Move fan pin definitions to globals.h
* Fix problems related to PWM fan.
* Revert previous change.
* Fix problems with idle things
* fix idle duty getting stuck at 100%
* Revert "fix idle duty getting stuck at 100%"
This reverts commit 7e9779483b.
* Revert "Fix problems with idle things"
This reverts commit 8bccb56d9a.
* Revert "Revert previous change."
This reverts commit fcb962864a.
* Remove mega support
* fixes
* more fixes
* moar fixes
* Should be working now
* Update speeduino.ini
* Lots of tweaking
* Update to work better with current FW
* Fix compiler warnings and include update things.
* Minor fixes
* Update logger.ino
* Fan duty working on mega too and fan output will be on/off
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
* Signed int8 for fixed crank angle (range -10to80)
* Limit ignition advance in tables to 70 and use different range for multiplied
* Limit WMI and Nitrous ign adv to reasonable values
* Fix IAT timing retard table
* Don't let IAT retard correction set a fixed advance. No other correction does this and this fixed correction can be changed by other corrections. Also the current code is not working as ignition offset is not used for IAT retard.
* Chrysler NGC pattern for 4-cylinder cam pattern
* New ignition mode for NGC decoder
* NGC decoder: Cleanup/performance improvements
* NGC decoder: Comment fixes
* DRZ400
Create the DRZ400 decoder based on duel wheel. Works by creating a filter on the secondary filter so it only detects one of the two teeth enabling single tooth decoder to work
* fix missing commas to speeduino.ini
* Make idle advance respect delay
Also increased resolution to half second.
Remove code duplication, removed unnecessary math
* Add a new configurable delay
* Fix copy paste error
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Add missing commas
* Missing closing brace
* Missing &
Was using bitwise comparison (&): looks like it should be boolean (&&)
* Remove extra closing brace "}"
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Enhanced programmable outputs
Added possibility to set minimum programmable output time.
Added names for the comparators to make it more user friendly, TS will complain about the change for existing tune.
Added more possibilities
Added possibility to set a minimum or a maximum output time
Added possibility to combine any number of rules or all of them
I got a lot of requests for this feature.
Keeps the RAM usage the same.
fix
* Fixed maximum timing
* Fix STM32 build
* Add RPM switch point for instantaneous MAP reading
* Add descriptions and other stuff to make PR
* Add suggested changes
* Use RPMdiv 100 for reading switch point
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Boost by Gear
* Minor changes to PR
- Changed *2 into bitwise operator
- Reserved 1 extra bit for boostByGearEnabled for 2 additional boost by gear modes in the future
* Added mode to set percentage of boost target table
* Vss condition in Idle Advance.
VSS value condition to activate Idle Advance.
* Update 1
Adequacy of verification
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Allow staged injection if we have throttle body injection regardless of the number of cylinders.
* Allow staged injection if we have throttle body injection regardless of the number of cylinders.
Co-authored-by: David Smith <dave@smithfamily.org.uk>
Co-authored-by: Josh Stewart <josh@noisymime.org>
* poll-level setting for speeduino.ini
* Update globals.h
* Simple poll level decoder
* Changed the poll level check to happen at tooth #1. Not at missing tooth.
* Set trigger edge automatically correct to work with closed loop VVT.
* Fix typo
* Changed to READ_SEC_TRIGGER() -macro
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
This adds a decoder for the Ford ST170 engine.
This setup uses a 36-1 primary and a unique 8-3 secondary trigger.
The existing missing tooth deooder with fixed parameters is used as the primary to reduce duplication.