Use OEM CMSIS peripheral access headers

os/common/ext/CMSIS/Nuvoton/NUMICRO/system_NUC123.h

@@ -0,0 +1,66 @@
+/**************************************************************************//**
+ * @file     system_NUC123.h
+ * @version  V3.0
+ * $Revision: 5 $
+ * $Date: 15/07/02 11:21a $
+ * @brief    NUC123 Series CMSIS System Header File
+ *
+ * @note
+ * SPDX-License-Identifier: Apache-2.0
+ * Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
+ *
+ ******************************************************************************/
+#ifndef __SYSTEM_NUC123_H
+#define __SYSTEM_NUC123_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/*---------------------------------------------------------------------------------------------------------*/
+/* Macro Definition                                                                                        */
+/*---------------------------------------------------------------------------------------------------------*/
+#ifndef DEBUG_PORT
+# define DEBUG_PORT      UART0       /*!< Select Debug Port which is used for retarget.c to output debug message to UART */
+#endif
+
+/*----------------------------------------------------------------------------
+  Define SYSCLK
+ *----------------------------------------------------------------------------*/
+#define __HXT       (12000000UL)    /*!< External Crystal Clock Frequency     */
+#define __LXT       (32768UL)       /*!< External Crystal Clock Frequency 32.768KHz */
+#define __HIRC      (22118400UL)    /*!< Internal 22M RC Oscillator Frequency */
+#define __LIRC      (10000UL)       /*!< Internal 10K RC Oscillator Frequency */
+#define __HSI       (50000000UL)    /*!< PLL default output is 50MHz */
+
+extern uint32_t SystemCoreClock;    /*!< System Clock Frequency (Core Clock) */
+extern uint32_t CyclesPerUs;        /*!< Cycles per micro second              */
+extern uint32_t PllClock;           /*!< PLL Output Clock Frequency           */
+
+/**
+ * Initialize the system
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Setup the microcontroller system
+ *         Initialize GPIO directions and values
+ */
+extern void SystemInit(void);
+
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Updates the SystemCoreClock with current core Clock
+ *         retrieved from CPU registers.
+ */
+extern void SystemCoreClockUpdate(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

os/common/ext/CMSIS/Nuvoton/NUMICRO/system_NUC123SD4AN0.h

@@ -1,75 +0,0 @@
- /**************************************************************************//**
- * @file     system_NUC123SD4AN0.h
- * @brief    CMSIS Cortex-M0 Device Peripheral Access Layer Header File for
- *           Device NUC123SD4AN0
- * @version  V5.00
- * @date     13. May 2019
- ******************************************************************************/
-/*
- * Copyright (c) 2019 /u/KeepItUnder. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef SYSTEM_NUC123SD4AN0_H   /* ToDo: replace '<Device>' with your device name */
-#define SYSTEM_NUC123SD4AN0_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdint.h>
-
-/**
- * Frequency Defines
- * 
- * See NUC123 Technical Reference Manual 5.4.2, page 103
- * 
- */
-
-#define __HXT          (12000000ul)    // PCB-mounted High Frequency Crystal (12MHz)
-#define __HIRC         (22118400ul)    // Internal MCU-block HF Oscillator Frequency (22.1184MHz)
-#define __LXT          (32768ul)       // PCB-mounted Low Frequency Crystal (32kHz)
-#define __LIRC         (10000ul)       // Internal MCU-block LF Oscillator Frequency (10kHz)
-#define __HSI          (50000000ul)    // PLL clock (50MHz)
-
-
-extern uint32_t SystemCoreClock;     /*!< System Clock Frequency (Core Clock)  */
-extern uint32_t CyclesPerUs;         /*!< Cycles per micro second              */
-extern uint32_t PllClock;            /*!< PLL Output Clock Frequency           */
-
-
-/**
-  \brief Setup the microcontroller system.
-
-   Initialize the System and update the SystemCoreClock variable.
- */
-extern void SystemInit (void);
-
-/**
-  \brief  Update SystemCoreClock variable.
-
-   Updates the SystemCoreClock with current core Clock retrieved from cpu registers.
- */
-extern void SystemCoreClockUpdate (void);
-
-extern void SystemUnlockReg (void);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* SYSTEM_NUC123SD4AN0_H */

os/common/startup/ARMCMx/devices/NUC123SD4AN0/cmparams.h

@@ -64,8 +64,7 @@
 /* Including the device CMSIS header. Note, we are not using the definitions
    from this header because we need this file to be usable also from
    assembler source files. We verify that the info matches instead.*/
-// #include "NUC123.h"
+#include "NUC123.h"
-#include "NUC123SD4AN0.h"
 
 /*lint -save -e9029 [10.4] Signedness comes from external files, it is
   unpredictable but gives no problems.*/