ChibiOS-Contrib/testhal/STM32/STM32F0xx/crc
barthess 53684030c9 QUEUES flags deleted from chconf.h files 2016-03-28 17:48:43 +03:00
..
Makefile Updated some testhal projects to new ChibiOS code 2016-03-15 10:19:56 +03:00
chconf.h QUEUES flags deleted from chconf.h files 2016-03-28 17:48:43 +03:00
halconf.h Added WDG switch to halconf.h files 2016-01-13 10:21:50 +03:00
halconf_community.h Updated some testhal projects to new ChibiOS code 2016-03-15 10:19:56 +03:00
main.c Add CRC Driver 2015-08-16 01:26:07 -04:00
mcuconf.h Add CRC Driver 2015-08-16 01:26:07 -04:00
mcuconf_community.h Add CRC Driver 2015-08-16 01:26:07 -04:00
readme.txt Add CRC Driver 2015-08-16 01:26:07 -04:00

readme.txt

*****************************************************************************
** ChibiOS/HAL - CRC driver demo for STM32F0xx (also sw driver)            **
*****************************************************************************

** TARGET **

The demo runs on an ST STM32F0-Discovery board.

** The Demo **

The application demonstrates the use of the STM32F0xx CRC driver.  There are
many different ways to configure and setup the CRC.  This demo has be
configured to test the following:
  * ST hardware block configured with CRC32 with or without DMA
  * ST hardware block configured with CRC16 with or without DMA
  * Software CRC32
  * Software CRC16

** Board Setup **

- No requirements

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com