mirror of https://github.com/rusefi/Polygonus.git
36e9ecfdec | ||
---|---|---|
PG-DSO-36-72.pretty | ||
PowerSSO.pretty | ||
ampseal.pretty | ||
conn_5_2.5mm.pretty | ||
export | ||
git_scripts | ||
polygonus-Shortage-Version-backups | ||
proteus-backups | ||
sunlord-MWSA0503.pretty | ||
tsdso24.pretty | ||
via.pretty | ||
.gitignore | ||
.gitmodules | ||
Keep_Alive.kicad_sch | ||
README.md | ||
bts4175.dcm | ||
bts4175.lib | ||
etb-9201.kicad_sch | ||
etb-9201.sch | ||
etb.sch | ||
fp-lib-table | ||
highside_quad.kicad_sch | ||
highside_quad.sch | ||
ign4.kicad_sch | ||
ign4.sch | ||
infineon_psu.dcm | ||
infineon_psu.lib | ||
knock.kicad_sch | ||
knock.sch | ||
lmr14020.dcm | ||
lmr14020.lib | ||
lowside_quad.kicad_sch | ||
lowside_quad.sch | ||
max9924.dcm | ||
max9924.lib | ||
mcu.kicad_sch | ||
mcu.sch | ||
polygonus-Shortage-Version.kicad_pcb | ||
polygonus-Shortage-Version.kicad_prl | ||
polygonus-Shortage-Version.kicad_pro | ||
polygonus-Shortage-Version.kicad_sch | ||
polygonus-Shortage-Version.lib | ||
polygonus-Shortage-Version.pro | ||
polygonus-Shortage-Version.sch | ||
polygonus-cache.lib | ||
psu.kicad_sch | ||
psu.sch | ||
quad_analog.kicad_sch | ||
quad_analog.sch | ||
quad_analog_pullup.kicad_sch | ||
quad_analog_pullup.sch | ||
sym-lib-table | ||
tle9201_2.dcm | ||
tle9201_2.lib | ||
tle9471.dcm | ||
tle9471.lib | ||
triggers.kicad_sch | ||
triggers.kicad_sch-bak | ||
triggers.sch | ||
vnq7140aj.dcm | ||
vnq7140aj.lib |
README.md
Polygonus
Polygonus - FOME PNP Brain unit
In scope -
- Critical systems on the majority of PNP targets
- up to 8 cylinder capability built into the brain board
- Full feature set of the protues broken out to pins meaning vheicle board can add the additional circuits if required
Out of scope -
- Race cars and tuned cars with large ammounts of additional equipment (that's for a wire in proteus or atlas)
- Non-standard engines in chassis
- Additional equipment beyond common mods to the chassis
Intended form factor - 80mm x 80mm up to 85mm x 85mm to suit the majority of cases but ideally as small as practical
Current list of parts dropped from Proteus:
- 4x lowsides (remove two VNLD5090) LS 9 - 12 routed to plugs
- 4x High/low (TC4427) IGN 9 - 12 removed and routed to pins
- Knock signal headphone jack () Line out removed from filtered 1 and 2
- Both ETB (TLE9201 only added if vehicle needs ) Removing ETB means routing Dis, Dir and PWM to pins adds 2 pins to total
- Both VR (board reconfigured for hall and MAX added if vehicle needs VR, also larger MAX chip can be used) VR1+ and VR2+ connected to input pins, VR- Removed from pins
Requirement to route 3.3v and 5v out of board for additional vehicle board equipment
Added keep alive voltage pin