Update Board - Sparky.md
This commit is contained in:
parent
77bfd1f708
commit
08cc4b38e3
|
@ -48,6 +48,7 @@ Press: "S19 or Hex.."
|
|||
Go to the folder where you saved the cleanflight_SPARKY.hex file, select it and press open (you might need to change the filetype in the DfuSE explorer window to "hex Files (*.hex)" to be able to see the file
|
||||
Press: "Generate" and select the .dfu output file and location
|
||||
If all worked well you should see " Success for 'Image for lternate Setting 00 (ST..)'!"
|
||||
|
||||
```
|
||||
|
||||
Put the device into DFU mode by powering on the sparky with the bootloader pins temporarily bridged. The only light that should come on is the blue PWR led.
|
||||
|
@ -70,6 +71,7 @@ Press "Choose.." at the bootom of the window and select the .dfu file created in
|
|||
"File correctly loaded" should appear in the status bar
|
||||
Press "Upgrade" and confirm with "Yes"
|
||||
The status bar will show the upload progress and confirm that the upload is complete at the end
|
||||
|
||||
```
|
||||
|
||||
Disconnect and reconnect the board from USB and continue to configure it via the Cleanflight configurator as per normal
|
||||
|
|
Loading…
Reference in New Issue