Moving SOULF4 to derivative of REVO (as it is effectively the same, jut sensor alignment differences)
This commit is contained in:
parent
1c3838320b
commit
0e11e4d22a
|
@ -27,6 +27,10 @@
|
||||||
#define TARGET_BOARD_IDENTIFIER "RVLT"
|
#define TARGET_BOARD_IDENTIFIER "RVLT"
|
||||||
#define USBD_PRODUCT_STRING "Revolt"
|
#define USBD_PRODUCT_STRING "Revolt"
|
||||||
|
|
||||||
|
#elif defined(SOULF4)
|
||||||
|
#define TARGET_BOARD_IDENTIFIER "SOUL"
|
||||||
|
#define USBD_PRODUCT_STRING "DemonSoulF4"
|
||||||
|
|
||||||
#else
|
#else
|
||||||
#define TARGET_BOARD_IDENTIFIER "REVO"
|
#define TARGET_BOARD_IDENTIFIER "REVO"
|
||||||
#define USBD_PRODUCT_STRING "Revolution"
|
#define USBD_PRODUCT_STRING "Revolution"
|
||||||
|
@ -63,6 +67,16 @@
|
||||||
#define MPU6500_CS_PIN PA4
|
#define MPU6500_CS_PIN PA4
|
||||||
#define MPU6500_SPI_INSTANCE SPI1
|
#define MPU6500_SPI_INSTANCE SPI1
|
||||||
|
|
||||||
|
#if defined(SOULF4)
|
||||||
|
#define ACC
|
||||||
|
#define USE_ACC_SPI_MPU6000
|
||||||
|
#define GYRO_MPU6000_ALIGN CW180_DEG
|
||||||
|
|
||||||
|
#define GYRO
|
||||||
|
#define USE_GYRO_SPI_MPU6000
|
||||||
|
#define ACC_MPU6000_ALIGN CW180_DEG
|
||||||
|
|
||||||
|
#else
|
||||||
#define ACC
|
#define ACC
|
||||||
#define USE_ACC_SPI_MPU6000
|
#define USE_ACC_SPI_MPU6000
|
||||||
#define GYRO_MPU6000_ALIGN CW270_DEG
|
#define GYRO_MPU6000_ALIGN CW270_DEG
|
||||||
|
@ -77,27 +91,23 @@
|
||||||
|
|
||||||
#define USE_GYRO_MPU6500
|
#define USE_GYRO_MPU6500
|
||||||
#define USE_GYRO_SPI_MPU6500
|
#define USE_GYRO_SPI_MPU6500
|
||||||
#define GYRO_MPU9250_ALIGN CW270_DEG
|
#define GYRO_MPU6500_ALIGN CW270_DEG
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
// MPU6000 interrupts
|
// MPU6000 interrupts
|
||||||
#define USE_EXTI
|
#define USE_EXTI
|
||||||
#define MPU_INT_EXTI PC4
|
#define MPU_INT_EXTI PC4
|
||||||
#define USE_MPU_DATA_READY_SIGNAL
|
#define USE_MPU_DATA_READY_SIGNAL
|
||||||
|
|
||||||
#if !defined(AIRBOTF4) && !defined(REVOLT)
|
#if !defined(AIRBOTF4) && !defined(REVOLT) && !defined(SOULF4)
|
||||||
#define MAG
|
#define MAG
|
||||||
#define USE_MAG_HMC5883
|
#define USE_MAG_HMC5883
|
||||||
#define MAG_HMC5883_ALIGN CW90_DEG
|
#define MAG_HMC5883_ALIGN CW90_DEG
|
||||||
|
|
||||||
//#define USE_MAG_NAZA
|
|
||||||
//#define MAG_NAZA_ALIGN CW180_DEG_FLIP
|
|
||||||
|
|
||||||
#define BARO
|
#define BARO
|
||||||
#define USE_BARO_MS5611
|
#define USE_BARO_MS5611
|
||||||
|
|
||||||
//#define PITOT
|
|
||||||
//#define USE_PITOT_MS4525
|
|
||||||
//#define MS4525_BUS I2C_DEVICE_EXT
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define M25P16_CS_PIN PB3
|
#define M25P16_CS_PIN PB3
|
||||||
|
|
|
@ -1,39 +0,0 @@
|
||||||
/*
|
|
||||||
* This file is part of Cleanflight.
|
|
||||||
*
|
|
||||||
* Cleanflight is free software: you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License as published by
|
|
||||||
* the Free Software Foundation, either version 3 of the License, or
|
|
||||||
* (at your option) any later version.
|
|
||||||
*
|
|
||||||
* Cleanflight is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public License
|
|
||||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <stdint.h>
|
|
||||||
|
|
||||||
#include <platform.h>
|
|
||||||
#include "drivers/io.h"
|
|
||||||
#include "drivers/timer.h"
|
|
||||||
#include "drivers/timer_def.h"
|
|
||||||
#include "drivers/dma.h"
|
|
||||||
|
|
||||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
|
||||||
DEF_TIM(TIM12, CH1, PB14, TIM_USE_PWM | TIM_USE_PPM, 0, 0 ), // PPM (5th pin on FlexiIO port)
|
|
||||||
DEF_TIM(TIM12, CH2, PB15, TIM_USE_PWM, 0, 0 ), // S2_IN - GPIO_PartialRemap_TIM3
|
|
||||||
DEF_TIM(TIM8, CH1, PC6, TIM_USE_PWM, 0, 0 ), // S3_IN
|
|
||||||
DEF_TIM(TIM8, CH2, PC7, TIM_USE_PWM, 0, 0 ), // S4_IN
|
|
||||||
DEF_TIM(TIM8, CH3, PC8, TIM_USE_PWM, 0, 0 ), // S5_IN
|
|
||||||
DEF_TIM(TIM8, CH4, PC9, TIM_USE_PWM, 0, 0 ), // S6_IN
|
|
||||||
DEF_TIM(TIM3, CH3, PB0, TIM_USE_MOTOR, 1, 0 ), // S1_OUT
|
|
||||||
DEF_TIM(TIM3, CH4, PB1, TIM_USE_MOTOR, 1, 0 ), // S2_OUT
|
|
||||||
DEF_TIM(TIM2, CH4, PA3, TIM_USE_MOTOR, 1, 0 ), // S3_OUT
|
|
||||||
DEF_TIM(TIM2, CH3, PA2, TIM_USE_MOTOR, 1, 0 ), // S4_OUT
|
|
||||||
DEF_TIM(TIM5, CH2, PA1, TIM_USE_MOTOR, 1, 0 ), // S5_OUT - GPIO_PartialRemap_TIM3
|
|
||||||
DEF_TIM(TIM5, CH1, PA0, TIM_USE_MOTOR | TIM_USE_LED, 1, 0 ), // S6_OUT
|
|
||||||
};
|
|
|
@ -1,122 +0,0 @@
|
||||||
/*
|
|
||||||
* This file is part of Cleanflight.
|
|
||||||
*
|
|
||||||
* Cleanflight is free software: you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License as published by
|
|
||||||
* the Free Software Foundation, either version 3 of the License, or
|
|
||||||
* (at your option) any later version.
|
|
||||||
*
|
|
||||||
* Cleanflight is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public License
|
|
||||||
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#pragma once
|
|
||||||
|
|
||||||
#define TARGET_BOARD_IDENTIFIER "SOUL"
|
|
||||||
|
|
||||||
#define CONFIG_START_FLASH_ADDRESS (0x08080000) //0x08080000 to 0x080A0000 (FLASH_Sector_8)
|
|
||||||
|
|
||||||
#define USBD_PRODUCT_STRING "DemonSoulF4"
|
|
||||||
#ifdef OPBL
|
|
||||||
#define USBD_SERIALNUMBER_STRING "0x8020000"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define LED0 PB5
|
|
||||||
#define LED1 PB4
|
|
||||||
|
|
||||||
#define BEEPER PB6
|
|
||||||
#define BEEPER_INVERTED
|
|
||||||
|
|
||||||
#define INVERTER PC0 // PC0 used as inverter select GPIO
|
|
||||||
#define INVERTER_USART USART1
|
|
||||||
|
|
||||||
#define MPU6000_CS_PIN PA4
|
|
||||||
#define MPU6000_SPI_INSTANCE SPI1
|
|
||||||
|
|
||||||
#define ACC
|
|
||||||
#define USE_ACC_SPI_MPU6000
|
|
||||||
#define GYRO_MPU6000_ALIGN CW180_DEG
|
|
||||||
|
|
||||||
#define GYRO
|
|
||||||
#define USE_GYRO_SPI_MPU6000
|
|
||||||
#define ACC_MPU6000_ALIGN CW180_DEG
|
|
||||||
|
|
||||||
// MPU6000 interrupts
|
|
||||||
#define USE_EXTI
|
|
||||||
#define MPU_INT_EXTI PC4
|
|
||||||
#define USE_MPU_DATA_READY_SIGNAL
|
|
||||||
#define EXTI_CALLBACK_HANDLER_COUNT 2 // MPU data ready (mag disabled)
|
|
||||||
|
|
||||||
|
|
||||||
#define M25P16_CS_PIN PB3
|
|
||||||
#define M25P16_SPI_INSTANCE SPI3
|
|
||||||
|
|
||||||
#define USE_FLASHFS
|
|
||||||
#define USE_FLASH_M25P16
|
|
||||||
|
|
||||||
#define USE_VCP
|
|
||||||
#define VBUS_SENSING_PIN PC5
|
|
||||||
|
|
||||||
#define USE_UART1
|
|
||||||
#define UART1_RX_PIN PA10
|
|
||||||
#define UART1_TX_PIN PA9
|
|
||||||
#define UART1_AHB1_PERIPHERALS RCC_AHB1Periph_DMA2
|
|
||||||
|
|
||||||
#define USE_UART3
|
|
||||||
#define UART3_RX_PIN PB11
|
|
||||||
#define UART3_TX_PIN PB10
|
|
||||||
|
|
||||||
#define USE_UART6
|
|
||||||
#define UART6_RX_PIN PC7
|
|
||||||
#define UART6_TX_PIN PC6
|
|
||||||
|
|
||||||
#define SERIAL_PORT_COUNT 4 //VCP, USART1, USART3, USART6
|
|
||||||
|
|
||||||
#define USE_ESCSERIAL
|
|
||||||
#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1
|
|
||||||
|
|
||||||
#define USE_SPI
|
|
||||||
|
|
||||||
#define USE_SPI_DEVICE_1
|
|
||||||
|
|
||||||
#define USE_SPI_DEVICE_3
|
|
||||||
#define SPI3_NSS_PIN PB3
|
|
||||||
#define SPI3_SCK_PIN PC10
|
|
||||||
#define SPI3_MISO_PIN PC11
|
|
||||||
#define SPI3_MOSI_PIN PC12
|
|
||||||
|
|
||||||
#define USE_I2C
|
|
||||||
#define I2C_DEVICE (I2CDEV_1)
|
|
||||||
|
|
||||||
#define USE_ADC
|
|
||||||
#define VBAT_ADC_PIN PC2
|
|
||||||
|
|
||||||
|
|
||||||
#define SENSORS_SET (SENSOR_ACC)
|
|
||||||
|
|
||||||
#define DEFAULT_FEATURES (FEATURE_VBAT | FEATURE_BLACKBOX)
|
|
||||||
#define DEFAULT_RX_FEATURE FEATURE_RX_SERIAL
|
|
||||||
#define SERIALRX_PROVIDER SERIALRX_SBUS
|
|
||||||
|
|
||||||
#define LED_STRIP
|
|
||||||
#define USE_DSHOT
|
|
||||||
#define USE_ESC_TELEMETRY
|
|
||||||
|
|
||||||
#define SPEKTRUM_BIND
|
|
||||||
// USART3,
|
|
||||||
#define BIND_PIN PB11
|
|
||||||
|
|
||||||
#define USE_SERIAL_4WAY_BLHELI_INTERFACE
|
|
||||||
|
|
||||||
#define TARGET_IO_PORTA 0xffff
|
|
||||||
#define TARGET_IO_PORTB 0xffff
|
|
||||||
#define TARGET_IO_PORTC 0xffff
|
|
||||||
#define TARGET_IO_PORTD 0xffff
|
|
||||||
|
|
||||||
#define USABLE_TIMER_CHANNEL_COUNT 12
|
|
||||||
#define USED_TIMERS ( TIM_N(2) | TIM_N(3) | TIM_N(5) | TIM_N(12) | TIM_N(8) | TIM_N(9) )
|
|
|
@ -1,6 +0,0 @@
|
||||||
F405_TARGETS += $(TARGET)
|
|
||||||
FEATURES += VCP ONBOARDFLASH
|
|
||||||
|
|
||||||
TARGET_SRC = \
|
|
||||||
drivers/accgyro_spi_mpu6000.c
|
|
||||||
|
|
Loading…
Reference in New Issue