Continue moving target specific code into target directory.
This commit is contained in:
Martin Budden
parent
c3e4eefcfc
commit
38a9ba9aae
|
|
@ -137,234 +137,6 @@ const uint16_t airPWM[] = {
|
|||
#endif
|
||||
|
||||
|
||||
#if defined(COLIBRI_RACE) || defined(LUX_RACE)
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
// prevent crashing, but do nothing
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
// prevent crashing, but do nothing
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(SPARKY) || defined(ALIENFLIGHTF3)
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM11 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
|
||||
PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM1
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM17
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM1 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
// TODO
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
// TODO
|
||||
0xFFFF
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef SPRACINGF3EVO
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef SPRACINGF3MINI
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8
|
||||
0xFFFF
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
const uint16_t * const hardwareMaps[] = {
|
||||
multiPWM,
|
||||
multiPPM,
|
||||
|
|
|
|||
|
|
@ -93,32 +93,6 @@ const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
|||
|
||||
#endif
|
||||
|
||||
#if defined(COLIBRI_RACE) || defined(LUX_RACE)
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource8, GPIO_AF_6}, // PWM1 - PA8
|
||||
|
||||
{ TIM3, GPIOC, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM2 - PC6
|
||||
{ TIM3, GPIOC, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM3 - PC7
|
||||
{ TIM3, GPIOC, Pin_8, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PMW4 - PC8
|
||||
{ TIM3, GPIOC, Pin_9, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM5 - PC9
|
||||
|
||||
{ TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM6 - PA0
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM7 - PA1
|
||||
{ TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM8 - PA2
|
||||
{ TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_1}, // PWM9 - PA3
|
||||
|
||||
{ TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource14, GPIO_AF_1}, // PWM10 - PB14
|
||||
{ TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_1}, // PWM11 - PB15
|
||||
};
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOC)
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef CHEBUZZF3
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
// INPUTS CH1-8
|
||||
|
|
@ -179,117 +153,6 @@ const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
|||
|
||||
#endif
|
||||
|
||||
#if defined(SPARKY) || defined(ALIENFLIGHTF3)
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
//
|
||||
// 6 x 3 pin headers
|
||||
//
|
||||
|
||||
{ TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource15, GPIO_AF_1}, // PWM1 - PB15 - TIM1_CH3N, TIM15_CH1N, *TIM15_CH2
|
||||
{ TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource14, GPIO_AF_1}, // PWM2 - PB14 - TIM1_CH2N, *TIM15_CH1
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // PWM3 - PA8 - *TIM1_CH1, TIM4_ETR
|
||||
{ TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM4 - PB0 - *TIM3_CH3, TIM1_CH2N, TIM8_CH2N
|
||||
{ TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 - PA6 - *TIM3_CH1, TIM8_BKIN, TIM1_BKIN, TIM16_CH1
|
||||
{ TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM6 - PA2 - *TIM2_CH3, !TIM15_CH1
|
||||
|
||||
//
|
||||
// 6 pin header
|
||||
//
|
||||
|
||||
// PWM7-10
|
||||
{ TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM7 - PB1 - *TIM3_CH4, TIM1_CH3N, TIM8_CH3N
|
||||
{ TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM8 - PA7 - !TIM3_CH2, *TIM17_CH1, TIM1_CH1N, TIM8_CH1
|
||||
{ TIM3, GPIOA, Pin_4, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PWM9 - PA4 - *TIM3_CH2
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM10 - PA1 - *TIM2_CH2, TIM15_CH1N
|
||||
|
||||
//
|
||||
// PPM PORT - Also USART2 RX (AF5)
|
||||
//
|
||||
|
||||
{ TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_1} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13
|
||||
//{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_9} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13
|
||||
|
||||
// USART3 RX/TX
|
||||
// RX conflicts with PPM port
|
||||
//{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1} // RX - PB11 - *TIM2_CH4, USART3_RX (AF7) - PWM11
|
||||
//{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1} // TX - PB10 - *TIM2_CH3, USART3_TX (AF7) - PWM12
|
||||
|
||||
};
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15) | TIM_N(17))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM17)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(SPRACINGF3EVO)
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
// PPM / UART2 RX
|
||||
{ TIM8, GPIOA, Pin_15, TIM_Channel_1, TIM8_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_2}, // PPM
|
||||
|
||||
{ TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM1
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM2
|
||||
{ TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM3
|
||||
{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM4
|
||||
{ TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5
|
||||
{ TIM3, GPIOA, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM6
|
||||
{ TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM7
|
||||
{ TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM8
|
||||
|
||||
// UART3 RX/TX
|
||||
{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // RC_CH4 - PB10 - *TIM2_CH3, USART3_TX (AF7)
|
||||
{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // RC_CH3 - PB11 - *TIM2_CH4, USART3_RX (AF7)
|
||||
|
||||
// IR / LED Strip Pad
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP
|
||||
};
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(8) | TIM_N(15))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM8 | RCC_APB2Periph_TIM15)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(SPRACINGF3MINI)
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
// PPM Pad
|
||||
#ifdef SPRACINGF3MINI_MKII_REVA
|
||||
{ TIM3, GPIOB, Pin_5, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource5, GPIO_AF_2}, // PPM - PB5
|
||||
// PB4 / TIM3 CH1 is connected to USBPresent
|
||||
#else
|
||||
{ TIM3, GPIOB, Pin_4, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PPM - PB4
|
||||
// PB5 / TIM3 CH2 is connected to USBPresent
|
||||
#endif
|
||||
|
||||
{ TIM16, GPIOA, Pin_6, TIM_Channel_1, TIM1_UP_TIM16_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_1}, // PWM1 - PA6
|
||||
{ TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM2 - PA7
|
||||
{ TIM4, GPIOB, Pin_8, TIM_Channel_3, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PWM3 - PB8
|
||||
{ TIM4, GPIOB, Pin_9, TIM_Channel_4, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM4 - PB9
|
||||
{ TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM5 - PA2
|
||||
{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM6 - PA3
|
||||
{ TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM7 - PA0
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM8 - PA1
|
||||
|
||||
// UART3 RX/TX
|
||||
{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // PWM9 - PB10 - TIM2_CH3 / USART3_TX (AF7)
|
||||
{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // PWM10 - PB11 - TIM2_CH4 / USART3_RX (AF7)
|
||||
|
||||
// LED Strip Pad
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP
|
||||
};
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(15) | TIM_N(16) |TIM_N(17))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3 | RCC_APB1Periph_TIM4)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM16 | RCC_APB2Periph_TIM17)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
#define USED_TIMER_COUNT BITCOUNT(USED_TIMERS)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,84 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/pwm_mapping.h"
|
||||
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM11 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
|
||||
PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM1
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM17
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM1 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
// TODO
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
// TODO
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
//
|
||||
// 6 x 3 pin headers
|
||||
//
|
||||
|
||||
{ TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource15, GPIO_AF_1}, // PWM1 - PB15 - TIM1_CH3N, TIM15_CH1N, *TIM15_CH2
|
||||
{ TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource14, GPIO_AF_1}, // PWM2 - PB14 - TIM1_CH2N, *TIM15_CH1
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // PWM3 - PA8 - *TIM1_CH1, TIM4_ETR
|
||||
{ TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM4 - PB0 - *TIM3_CH3, TIM1_CH2N, TIM8_CH2N
|
||||
{ TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 - PA6 - *TIM3_CH1, TIM8_BKIN, TIM1_BKIN, TIM16_CH1
|
||||
{ TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM6 - PA2 - *TIM2_CH3, !TIM15_CH1
|
||||
|
||||
//
|
||||
// 6 pin header
|
||||
//
|
||||
|
||||
// PWM7-10
|
||||
{ TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM7 - PB1 - *TIM3_CH4, TIM1_CH3N, TIM8_CH3N
|
||||
{ TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM8 - PA7 - !TIM3_CH2, *TIM17_CH1, TIM1_CH1N, TIM8_CH1
|
||||
{ TIM3, GPIOA, Pin_4, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PWM9 - PA4 - *TIM3_CH2
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM10 - PA1 - *TIM2_CH2, TIM15_CH1N
|
||||
|
||||
//
|
||||
// PPM PORT - Also USART2 RX (AF5)
|
||||
//
|
||||
|
||||
{ TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_1} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13
|
||||
//{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_9} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13
|
||||
|
||||
// USART3 RX/TX
|
||||
// RX conflicts with PPM port
|
||||
//{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1} // RX - PB11 - *TIM2_CH4, USART3_RX (AF7) - PWM11
|
||||
//{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1} // TX - PB10 - *TIM2_CH3, USART3_TX (AF7) - PWM12
|
||||
|
||||
};
|
||||
|
||||
|
|
@ -150,3 +150,11 @@
|
|||
#define TARGET_IO_PORTC 0xffff
|
||||
#define TARGET_IO_PORTD (BIT(2))
|
||||
#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4))
|
||||
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15) | TIM_N(17))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM17)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,84 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/pwm_mapping.h"
|
||||
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
// prevent crashing, but do nothing
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
// prevent crashing, but do nothing
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource8, GPIO_AF_6}, // PWM1 - PA8
|
||||
|
||||
{ TIM3, GPIOC, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM2 - PC6
|
||||
{ TIM3, GPIOC, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM3 - PC7
|
||||
{ TIM3, GPIOC, Pin_8, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PMW4 - PC8
|
||||
{ TIM3, GPIOC, Pin_9, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM5 - PC9
|
||||
|
||||
{ TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM6 - PA0
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM7 - PA1
|
||||
{ TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM8 - PA2
|
||||
{ TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_1}, // PWM9 - PA3
|
||||
|
||||
{ TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource14, GPIO_AF_1}, // PWM10 - PB14
|
||||
{ TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_1}, // PWM11 - PB15
|
||||
};
|
||||
|
||||
|
|
@ -177,3 +177,10 @@
|
|||
#define TARGET_IO_PORTC 0xffff
|
||||
#define TARGET_IO_PORTD (BIT(2))
|
||||
#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4))
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOC)
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,84 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/pwm_mapping.h"
|
||||
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
// prevent crashing, but do nothing
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
// prevent crashing, but do nothing
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8), // Swap to servo if needed
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource8, GPIO_AF_6}, // PWM1 - PA8
|
||||
|
||||
{ TIM3, GPIOC, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM2 - PC6
|
||||
{ TIM3, GPIOC, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM3 - PC7
|
||||
{ TIM3, GPIOC, Pin_8, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PMW4 - PC8
|
||||
{ TIM3, GPIOC, Pin_9, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM5 - PC9
|
||||
|
||||
{ TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM6 - PA0
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM7 - PA1
|
||||
{ TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM8 - PA2
|
||||
{ TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_1}, // PWM9 - PA3
|
||||
|
||||
{ TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource14, GPIO_AF_1}, // PWM10 - PB14
|
||||
{ TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_1}, // PWM11 - PB15
|
||||
};
|
||||
|
||||
|
|
@ -147,3 +147,10 @@
|
|||
#define TARGET_IO_PORTC 0xffff
|
||||
#define TARGET_IO_PORTD (BIT(2))
|
||||
#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4))
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOC)
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,84 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/pwm_mapping.h"
|
||||
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM11 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
|
||||
PWM1 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM15
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM1
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM17
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM3
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8), // TIM2
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM1 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
// TODO
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
// TODO
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
//
|
||||
// 6 x 3 pin headers
|
||||
//
|
||||
|
||||
{ TIM15, GPIOB, Pin_15, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource15, GPIO_AF_1}, // PWM1 - PB15 - TIM1_CH3N, TIM15_CH1N, *TIM15_CH2
|
||||
{ TIM15, GPIOB, Pin_14, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource14, GPIO_AF_1}, // PWM2 - PB14 - TIM1_CH2N, *TIM15_CH1
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // PWM3 - PA8 - *TIM1_CH1, TIM4_ETR
|
||||
{ TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM4 - PB0 - *TIM3_CH3, TIM1_CH2N, TIM8_CH2N
|
||||
{ TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5 - PA6 - *TIM3_CH1, TIM8_BKIN, TIM1_BKIN, TIM16_CH1
|
||||
{ TIM2, GPIOA, Pin_2, TIM_Channel_3, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_1}, // PWM6 - PA2 - *TIM2_CH3, !TIM15_CH1
|
||||
|
||||
//
|
||||
// 6 pin header
|
||||
//
|
||||
|
||||
// PWM7-10
|
||||
{ TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM7 - PB1 - *TIM3_CH4, TIM1_CH3N, TIM8_CH3N
|
||||
{ TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM8 - PA7 - !TIM3_CH2, *TIM17_CH1, TIM1_CH1N, TIM8_CH1
|
||||
{ TIM3, GPIOA, Pin_4, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PWM9 - PA4 - *TIM3_CH2
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 0, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM10 - PA1 - *TIM2_CH2, TIM15_CH1N
|
||||
|
||||
//
|
||||
// PPM PORT - Also USART2 RX (AF5)
|
||||
//
|
||||
|
||||
{ TIM2, GPIOA, Pin_3, TIM_Channel_4, TIM2_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_1} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13
|
||||
//{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource3, GPIO_AF_9} // PPM - PA3 - TIM2_CH4, TIM15_CH2 - PWM13
|
||||
|
||||
// USART3 RX/TX
|
||||
// RX conflicts with PPM port
|
||||
//{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1} // RX - PB11 - *TIM2_CH4, USART3_RX (AF7) - PWM11
|
||||
//{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1} // TX - PB10 - *TIM2_CH3, USART3_TX (AF7) - PWM12
|
||||
|
||||
};
|
||||
|
||||
|
|
@ -19,6 +19,8 @@
|
|||
|
||||
#define TARGET_BOARD_IDENTIFIER "SPKY" // SParKY
|
||||
|
||||
#define CONFIG_FASTLOOP_PREFERRED_ACC 1
|
||||
|
||||
#define LED0 PB4 // Blue (Rev 1 & 2) - PB4
|
||||
#define LED1 PB5 // Green (Rev 1) / Red (Rev 2) - PB5
|
||||
|
||||
|
|
@ -156,5 +158,17 @@
|
|||
|
||||
|
||||
// available IO pins (from schematics)
|
||||
#define TARGET_IO_PORTA (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15))
|
||||
#define TARGET_IO_PORTB (BIT(0)|BIT(1)|BIT(10)|BIT(11)|BIT(14)|BIT(15)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9))
|
||||
//#define TARGET_IO_PORTA (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15))
|
||||
//#define TARGET_IO_PORTB (BIT(0)|BIT(1)|BIT(10)|BIT(11)|BIT(14)|BIT(15)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9))
|
||||
// !!TODO - check following lines are correct
|
||||
#define TARGET_IO_PORTA (BIT(1)|BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)|BIT(13)|BIT(14)|BIT(15))
|
||||
#define TARGET_IO_PORTB (BIT(0)|BIT(1)|BIT(6)|BIT(10)|BIT(11)|BIT(14)|BIT(15)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7)|BIT(8)|BIT(9)|BIT(12)|BIT(13))
|
||||
#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4))
|
||||
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(15) | TIM_N(17))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM17)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,87 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/pwm_mapping.h"
|
||||
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
// PPM / UART2 RX
|
||||
{ TIM8, GPIOA, Pin_15, TIM_Channel_1, TIM8_CC_IRQn, 0, Mode_AF_PP_PD, GPIO_PinSource15, GPIO_AF_2}, // PPM
|
||||
|
||||
{ TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM1
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM2
|
||||
{ TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM3
|
||||
{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM4
|
||||
{ TIM3, GPIOA, Pin_6, TIM_Channel_1, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_2}, // PWM5
|
||||
{ TIM3, GPIOA, Pin_7, TIM_Channel_2, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_2}, // PWM6
|
||||
{ TIM3, GPIOB, Pin_0, TIM_Channel_3, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_2}, // PWM7
|
||||
{ TIM3, GPIOB, Pin_1, TIM_Channel_4, TIM3_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_2}, // PWM8
|
||||
|
||||
// UART3 RX/TX
|
||||
{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // RC_CH4 - PB10 - *TIM2_CH3, USART3_TX (AF7)
|
||||
{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // RC_CH3 - PB11 - *TIM2_CH4, USART3_RX (AF7)
|
||||
|
||||
// IR / LED Strip Pad
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP
|
||||
};
|
||||
|
||||
|
|
@ -198,3 +198,11 @@
|
|||
#define TARGET_IO_PORTB 0xffff
|
||||
#define TARGET_IO_PORTC (BIT(13)|BIT(14)|BIT(15))
|
||||
#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4))
|
||||
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(8) | TIM_N(15))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM8 | RCC_APB2Periph_TIM15)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,93 @@
|
|||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include <platform.h>
|
||||
#include "drivers/pwm_mapping.h"
|
||||
|
||||
const uint16_t multiPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t multiPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM4 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM5 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_MOTOR_OUTPUT << 8),
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPPM[] = {
|
||||
PWM1 | (MAP_TO_PPM_INPUT << 8), // PPM input
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const uint16_t airPWM[] = {
|
||||
PWM2 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #1
|
||||
PWM3 | (MAP_TO_MOTOR_OUTPUT << 8), // motor #2
|
||||
PWM4 | (MAP_TO_SERVO_OUTPUT << 8), // servo #1
|
||||
PWM5 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM6 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM7 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM8 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM9 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM10 | (MAP_TO_SERVO_OUTPUT << 8),
|
||||
PWM11 | (MAP_TO_SERVO_OUTPUT << 8), // servo #8
|
||||
0xFFFF
|
||||
};
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
// PPM Pad
|
||||
#ifdef SPRACINGF3MINI_MKII_REVA
|
||||
{ TIM3, GPIOB, Pin_5, TIM_Channel_2, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource5, GPIO_AF_2}, // PPM - PB5
|
||||
// PB4 / TIM3 CH1 is connected to USBPresent
|
||||
#else
|
||||
{ TIM3, GPIOB, Pin_4, TIM_Channel_1, TIM3_IRQn, 0, Mode_AF_PP, GPIO_PinSource4, GPIO_AF_2}, // PPM - PB4
|
||||
// PB5 / TIM3 CH2 is connected to USBPresent
|
||||
#endif
|
||||
|
||||
{ TIM16, GPIOA, Pin_6, TIM_Channel_1, TIM1_UP_TIM16_IRQn, 1, Mode_AF_PP, GPIO_PinSource6, GPIO_AF_1}, // PWM1 - PA6
|
||||
{ TIM17, GPIOA, Pin_7, TIM_Channel_1, TIM1_TRG_COM_TIM17_IRQn, 1, Mode_AF_PP, GPIO_PinSource7, GPIO_AF_1}, // PWM2 - PA7
|
||||
{ TIM4, GPIOB, Pin_8, TIM_Channel_3, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_2}, // PWM3 - PB8
|
||||
{ TIM4, GPIOB, Pin_9, TIM_Channel_4, TIM4_IRQn, 1, Mode_AF_PP, GPIO_PinSource9, GPIO_AF_2}, // PWM4 - PB9
|
||||
{ TIM15, GPIOA, Pin_2, TIM_Channel_1, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource2, GPIO_AF_9}, // PWM5 - PA2
|
||||
{ TIM15, GPIOA, Pin_3, TIM_Channel_2, TIM1_BRK_TIM15_IRQn, 1, Mode_AF_PP, GPIO_PinSource3, GPIO_AF_9}, // PWM6 - PA3
|
||||
{ TIM2, GPIOA, Pin_0, TIM_Channel_1, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource0, GPIO_AF_1}, // PWM7 - PA0
|
||||
{ TIM2, GPIOA, Pin_1, TIM_Channel_2, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource1, GPIO_AF_1}, // PWM8 - PA1
|
||||
|
||||
// UART3 RX/TX
|
||||
{ TIM2, GPIOB, Pin_10, TIM_Channel_3, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource10, GPIO_AF_1}, // PWM9 - PB10 - TIM2_CH3 / USART3_TX (AF7)
|
||||
{ TIM2, GPIOB, Pin_11, TIM_Channel_4, TIM2_IRQn, 1, Mode_AF_PP, GPIO_PinSource11, GPIO_AF_1}, // PWM10 - PB11 - TIM2_CH4 / USART3_RX (AF7)
|
||||
|
||||
// LED Strip Pad
|
||||
{ TIM1, GPIOA, Pin_8, TIM_Channel_1, TIM1_CC_IRQn, 1, Mode_AF_PP, GPIO_PinSource8, GPIO_AF_6}, // GPIO_TIMER / LED_STRIP
|
||||
};
|
||||
|
||||
|
|
@ -19,6 +19,8 @@
|
|||
|
||||
#define TARGET_BOARD_IDENTIFIER "SRFM"
|
||||
|
||||
#define CONFIG_FASTLOOP_PREFERRED_ACC 1
|
||||
|
||||
// early prototype had slightly different pin mappings.
|
||||
//#define SPRACINGF3MINI_MKII_REVA
|
||||
|
||||
|
|
@ -209,3 +211,9 @@
|
|||
#define TARGET_IO_PORTB 0xffff
|
||||
#define TARGET_IO_PORTC (BIT(13)|BIT(14)|BIT(15))
|
||||
#define TARGET_IO_PORTF (BIT(0)|BIT(1)|BIT(4))
|
||||
|
||||
#define USED_TIMERS (TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(15) | TIM_N(16) |TIM_N(17))
|
||||
|
||||
#define TIMER_APB1_PERIPHERALS (RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3 | RCC_APB1Periph_TIM4)
|
||||
#define TIMER_APB2_PERIPHERALS (RCC_APB2Periph_TIM1 | RCC_APB2Periph_TIM15 | RCC_APB2Periph_TIM16 | RCC_APB2Periph_TIM17)
|
||||
#define TIMER_AHB_PERIPHERALS (RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB)
|
||||
|
|
|
|||
Loading…
Reference in New Issue