Merge pull request #4974 from bnn1044/PYRODRONEF4
Add PYRODRONEF4 target
This commit is contained in:
Michael Keller
GitHub
commit
b71fe232c3
|
|
@ -0,0 +1,47 @@
|
||||||
|
# Board - PYRODRONEF4
|
||||||
|
|
||||||
|
The PYRODRONEF4 target is new board developed by http://pirofliprc.com/
|
||||||
|
|
||||||
|
* flat bottom.(No component on the bottom)
|
||||||
|
* 6 uarts with 4 motor outputs(D-shot supported)
|
||||||
|
* uart 1 inverted for sbus(selectable) , uart 3 with inverter for frsky telemetry
|
||||||
|
* onboard 5V bec.
|
||||||
|
* direct solder pad layout for 4 IN 1 ESC or use 4 in 1 ESC Plug
|
||||||
|
* With uart RX pin layout inside the 4 IN 1 ESC plug for use ESC telemetry.
|
||||||
|
* USB -VCP
|
||||||
|
|
||||||
|
## Serial Ports
|
||||||
|
|
||||||
|
| Value | Identifier | RX | TX | Notes |
|
||||||
|
| ----- | ------------ | -----| -----| ------------------------------------------------------------------------------------------- |
|
||||||
|
| 1 | USART1 | PA10 | PA9 | |
|
||||||
|
| 2 | USART2 | PA3 | PA2 | |
|
||||||
|
| 3 | USART3 | PB11 | PB10| |
|
||||||
|
| 4 | USART4 | PA1 | PA0 | |
|
||||||
|
| 6 | USART5 | PD2 | PC12| |
|
||||||
|
| 6 | USART6 | PC7 | PC6 | |
|
||||||
|
|
||||||
|
## Pinout
|
||||||
|
TX1, RX1 -> UART1 sbus pad (RX1 Use for Sbus has inverter build in)
|
||||||
|
TX2, RX2 -> UART2 Esc Telemetry (use for esc telemetery)
|
||||||
|
TX3, RX3 -> UART3 TEL PAD (use for frsky temeletery has inverter build in)
|
||||||
|
TX4, RX4 -> UART4 (Free uart)
|
||||||
|
TX5, RX5 -> UART5 TX5 (TX5 use for smart audio, No RX5 pinout )
|
||||||
|
TX6, RX6 -> UART5 (design to use crossfire rx)
|
||||||
|
|
||||||
|
## board label
|
||||||
|
vtx_+ VTX power (Vbat)
|
||||||
|
vtx_- VTX ground
|
||||||
|
video VTX Signal
|
||||||
|
current Current sensor input
|
||||||
|
bb+ Buzzer +
|
||||||
|
bb- Buzzer -
|
||||||
|
m1 Motor 1
|
||||||
|
m2 Motor 2
|
||||||
|
m3 Motor 3
|
||||||
|
m4 Motor 4
|
||||||
|
Vbat Battery input positive
|
||||||
|
Gnd Battery input negative
|
||||||
|
Cam_C Camera control(with build in Resistor and capacitor)
|
||||||
|
5V 5v output
|
||||||
|
led_s Led strip signal
|
||||||
|
|
@ -0,0 +1,34 @@
|
||||||
|
/*
|
||||||
|
* This file is part of Cleanflight.
|
||||||
|
*
|
||||||
|
* Cleanflight is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* Cleanflight is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <platform.h>
|
||||||
|
#include "drivers/io.h"
|
||||||
|
#include "drivers/dma.h"
|
||||||
|
#include "drivers/timer.h"
|
||||||
|
#include "drivers/timer_def.h"
|
||||||
|
|
||||||
|
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||||
|
|
||||||
|
DEF_TIM(TIM11, CH1, PB9, TIM_USE_ANY, 0, 0), // CAMERA_CONTROL_PIN
|
||||||
|
|
||||||
|
DEF_TIM(TIM3, CH4, PB1, TIM_USE_MOTOR, 0, 0), // M1_OUT - D1_ST2_CH5
|
||||||
|
DEF_TIM(TIM8, CH2N, PB0, TIM_USE_MOTOR, 0, 0), // M2_OUT - D2_ST3_CH7
|
||||||
|
DEF_TIM(TIM8, CH4, PC9, TIM_USE_MOTOR, 0, 0), // M3_OUT - D2_ST7_CH7
|
||||||
|
DEF_TIM(TIM1, CH1, PA8, TIM_USE_MOTOR, 0, 1), // M4_OUT - D2_ST1_CH6
|
||||||
|
DEF_TIM(TIM4, CH3, PB8, TIM_USE_LED , 0, 0) // LED & MOTOR5 D1_ST7_CH2
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,116 @@
|
||||||
|
/*
|
||||||
|
* This is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This software is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this software. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
#define TARGET_BOARD_IDENTIFIER "PYRO"
|
||||||
|
#define USBD_PRODUCT_STRING "PYRODRONEF4"
|
||||||
|
|
||||||
|
#define LED0_PIN PB4
|
||||||
|
#define BEEPER PB5
|
||||||
|
#define BEEPER_INVERTED
|
||||||
|
|
||||||
|
#define INVERTER_PIN_UART1 PC3 // PC3 used as sBUS inverter select GPIO
|
||||||
|
#define CAMERA_CONTROL_PIN PB9 // define dedicated camera_osd_control pin
|
||||||
|
|
||||||
|
#define USE_EXTI
|
||||||
|
#define MPU_INT_EXTI PC4
|
||||||
|
#define USE_MPU_DATA_READY_SIGNAL
|
||||||
|
|
||||||
|
// DEFINE SPI USAGE
|
||||||
|
#define USE_SPI
|
||||||
|
#define USE_SPI_DEVICE_1
|
||||||
|
|
||||||
|
// MPU 6000
|
||||||
|
#define MPU6000_CS_PIN PA4
|
||||||
|
#define MPU6000_SPI_INSTANCE SPI1
|
||||||
|
#define USE_ACC
|
||||||
|
#define USE_ACC_SPI_MPU6000
|
||||||
|
#define USE_GYRO
|
||||||
|
#define USE_GYRO_SPI_MPU6000
|
||||||
|
#define GYRO_MPU6000_ALIGN CW0_DEG
|
||||||
|
#define ACC_MPU6000_ALIGN CW0_DEG
|
||||||
|
|
||||||
|
// DEFINE OSD
|
||||||
|
#define USE_SPI_DEVICE_2
|
||||||
|
#define SPI2_NSS_PIN PB12
|
||||||
|
#define SPI2_SCK_PIN PB13
|
||||||
|
#define SPI2_MISO_PIN PB14
|
||||||
|
#define SPI2_MOSI_PIN PB15
|
||||||
|
|
||||||
|
#define OSD
|
||||||
|
#define USE_MAX7456
|
||||||
|
#define MAX7456_SPI_INSTANCE SPI2
|
||||||
|
#define MAX7456_SPI_CS_PIN PB12
|
||||||
|
#define MAX7456_SPI_CLK (SPI_CLOCK_STANDARD) // 10MHz
|
||||||
|
#define MAX7456_RESTORE_CLK (SPI_CLOCK_FAST)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// DEFINE UART AND VCP
|
||||||
|
#define USE_VCP
|
||||||
|
|
||||||
|
#define USE_UART1
|
||||||
|
#define UART1_RX_PIN PA10
|
||||||
|
#define UART1_TX_PIN PA9
|
||||||
|
#define UART1_AHB1_PERIPHERALS RCC_AHB1Periph_DMA2
|
||||||
|
|
||||||
|
#define USE_UART2
|
||||||
|
#define UART2_RX_PIN PA3
|
||||||
|
#define UART2_TX_PIN PA2
|
||||||
|
|
||||||
|
#define USE_UART3
|
||||||
|
#define UART3_RX_PIN PB11
|
||||||
|
#define UART3_TX_PIN PB10
|
||||||
|
|
||||||
|
#define USE_UART4
|
||||||
|
#define UART4_RX_PIN PA1
|
||||||
|
#define UART4_TX_PIN PA0
|
||||||
|
|
||||||
|
#define USE_UART5
|
||||||
|
#define UART5_RX_PIN PD2
|
||||||
|
#define UART5_TX_PIN PC12
|
||||||
|
|
||||||
|
#define USE_UART6
|
||||||
|
#define UART6_RX_PIN PC7
|
||||||
|
#define UART6_TX_PIN PC6
|
||||||
|
#define SERIAL_PORT_COUNT 7 //VCP, USART1, USART2,USART3,USART4, USART5,USART6
|
||||||
|
|
||||||
|
|
||||||
|
#define USE_ESCSERIAL
|
||||||
|
#define ESCSERIAL_TIMER_TX_PIN PB9 // (HARDARE=0,PPM)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
//DEFINE BATTERY METER
|
||||||
|
#define USE_ADC
|
||||||
|
#define CURRENT_METER_ADC_PIN PC1
|
||||||
|
#define VBAT_ADC_PIN PC2
|
||||||
|
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
|
||||||
|
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_NONE
|
||||||
|
#define TRANSPONDER
|
||||||
|
|
||||||
|
// DEFINE DEFAULT FEATURE
|
||||||
|
#define DEFAULT_RX_FEATURE FEATURE_RX_SERIAL
|
||||||
|
#define DEFAULT_FEATURES FEATURE_OSD
|
||||||
|
#define USE_SERIAL_4WAY_BLHELI_INTERFACE
|
||||||
|
|
||||||
|
#define TARGET_IO_PORTA (0xffff & ~(BIT(14)|BIT(13)))
|
||||||
|
#define TARGET_IO_PORTB (0xffff & ~(BIT(2)))
|
||||||
|
#define TARGET_IO_PORTC (0xffff & ~(BIT(15)|BIT(14)|BIT(13)))
|
||||||
|
#define TARGET_IO_PORTD BIT(2)
|
||||||
|
|
||||||
|
// DEFINE TIMERS
|
||||||
|
#define USABLE_TIMER_CHANNEL_COUNT 6
|
||||||
|
#define USED_TIMERS ( TIM_N(1) | TIM_N(3) | TIM_N(4) | TIM_N(8) | TIM_N(11))
|
||||||
|
|
@ -0,0 +1,7 @@
|
||||||
|
F405_TARGETS += $(TARGET)
|
||||||
|
FEATURES += VCP
|
||||||
|
TARGET_SRC = \
|
||||||
|
drivers/accgyro/accgyro_spi_mpu6000.c \
|
||||||
|
drivers/accgyro/accgyro_spi_mpu6500.c \
|
||||||
|
drivers/accgyro/accgyro_mpu6500.c \
|
||||||
|
drivers/max7456.c
|
||||||
Loading…
Reference in New Issue