56 lines
1.7 KiB
Markdown
56 lines
1.7 KiB
Markdown
# Sonar
|
|
|
|
A sonar sensor can be used to measure altitude for use with BARO and SONAR altitude
|
|
hold modes.
|
|
|
|
The sonar sensor is used instead of the pressure sensor (barometer) at low altitudes (less than about 3.5 meters above the ground).
|
|
The sonar sensor is only used when the aircraft inclination angle (attitude) is small (less than 22.5 degrees).
|
|
|
|
## Hardware
|
|
|
|
Currently the main supported sensor is the HCSR04 sensor.
|
|
The Parallax 28015 single-wire sonar can also be used by connecting 1k resistors to the Trigger and Echo pins, and the other end of the resistors shorted together and to the Sonar module.
|
|
|
|
```
|
|
1k
|
|
TRIGGER--/\/\--\
|
|
\_______ 28015 SONAR
|
|
1k /
|
|
ECHO-----/\/\--/
|
|
```
|
|
|
|
|
|
## Connections
|
|
|
|
### Naze/Flip32+
|
|
|
|
| Mode | Trigger | Echo | Inline 1k resistors |
|
|
| ------------------------------- | ------------- | ------------- | ------------------- |
|
|
| Parallel PWM/ADC current sensor | PB8 / Motor 5 | PB9 / Motor 6 | NO (5v tolerant) |
|
|
| PPM/Serial RX | PB0 / RC7 | PB1 / RC8 | YES (3.3v input) |
|
|
|
|
#### Constraints
|
|
|
|
Current meter cannot be used in conjunction with Parallel PWM and Sonar.
|
|
|
|
### CC3D
|
|
|
|
| Trigger | Echo | Inline 1k resistors |
|
|
| ------------- | ------------- | ------------------- |
|
|
| PB5 / RC4 | PB0 / RC5 | YES (3.3v input) |
|
|
|
|
#### Constraints
|
|
|
|
Sonar cannot be used in conjuction with SoftSerial or Parallel PWM.
|
|
|
|
### SPRacingF3
|
|
|
|
| Trigger | Echo | Inline 1k resistors |
|
|
| ------------- | ------------- | ------------------- |
|
|
| PB0 / RC7 | PB1 / RC8 | YES (3.3v input) |
|
|
|
|
#### Constraints
|
|
|
|
Sonar cannot be used in conjuction with SoftSerial2 or Parallel PWM.
|
|
|