59 lines
1.4 KiB
Markdown
59 lines
1.4 KiB
Markdown
|
|
# Receivers (RX)
|
|
|
|
## Parallel PWM
|
|
|
|
8 channel support, 1 channel per input pin. On some platforms using parallel input will disable the use of serial ports
|
|
and softserial making it hard to use telemetry or gps features.
|
|
|
|
## PPM (PPM SUM)
|
|
|
|
12 channels via a single input pin, not as accurate or jitter free as methods that use serial communications.
|
|
|
|
## MultiWii serial protocol (MSP)
|
|
|
|
Allows you to use MSP commands as the RC input. Only 8 channel support to maintain compatibility with MSP.
|
|
|
|
## Spektrum
|
|
|
|
12 channels via serial currently supported.
|
|
|
|
## SBUS
|
|
|
|
12 channels via serial currently supported.
|
|
|
|
## SUMD
|
|
|
|
16 channels via serial currently supported.
|
|
|
|
## SUMH
|
|
|
|
8 channels via serial currently supported.
|
|
|
|
|
|
### Configuration
|
|
|
|
See the Configuration document some some RX configuration examples.
|
|
|
|
For Serial RX enable `RX_SERIAL` and set the `serialrx_provider` cli setting as follows.
|
|
|
|
| Serial RX Provider | Value |
|
|
| ------------------ | ----- |
|
|
| SPEKTRUM1024 | 0 |
|
|
| SPEKTRUM2048 | 1 |
|
|
| SBUS | 2 |
|
|
| SUMD | 3 |
|
|
| SUMH | 4 |
|
|
|
|
#### PPM/PWM input filtering.
|
|
|
|
Hardware input filtering can be enabled if you are experiencing interference on the signal sent via your PWM/PPM RX.
|
|
|
|
Use the `input_filtering_mode` cli setting to select a mode.
|
|
|
|
| Value | Meaning |
|
|
| ----- | --------- |
|
|
| 0 | Disabled |
|
|
| 1 | Enabled |
|
|
|