104 lines
3.1 KiB
Markdown
104 lines
3.1 KiB
Markdown
# Migrating from baseflight
|
|
|
|
## Procedure
|
|
|
|
**First ensure your main flight battery is disconnected or your props are off!**
|
|
|
|
Before flashing with cleanflight, dump your configs for each profile via the CLI and save to a text file.
|
|
|
|
```
|
|
profile 0
|
|
dump
|
|
profile 1
|
|
dump
|
|
profile 2
|
|
dump
|
|
```
|
|
|
|
Then after flashing cleanflight paste the output from each dump command into the cli, switching profiles as you go.
|
|
|
|
You'll note that some commands are not recognised by cleanflight when you do this. For the commands that are not recognised look
|
|
up the new configuration options and choose appropriate values for the settings. See below for a list of differences.
|
|
|
|
Once you've done this for the first profile, save the config. Then verify your config is OK, e.g. features serial ports, etc.
|
|
When you've verified the first profile is OK repeat for the other profiles.
|
|
|
|
It's also advisable to take screenshots of your AUX settings from baseflight configurator and then after re-applying the settings
|
|
verify your aux config is correct - aux settings are not backwards compatible.
|
|
|
|
## CLI command differences from baseflight
|
|
|
|
In general all CLI commands use underscore characters to separate words for consistency. In baseflight the format of CLI commands is somewhat haphazard.
|
|
|
|
### gps_baudrate
|
|
reason: new serial port configuration.
|
|
|
|
See `serial` command.
|
|
|
|
### gps_type
|
|
reason: renamed to `gps_provider` for consistency
|
|
|
|
### serialrx_type
|
|
reason: renamed to `serialrx_provider` for consistency
|
|
|
|
### rssi_aux_channel
|
|
reason: renamed to `rssi_channel` for improved functionality
|
|
|
|
Cleanflight supports using any RX channel for rssi. Baseflight only supports AUX1 to 4.
|
|
|
|
In Cleanflight a value of 0 disables the feature, a higher value indicates the channel number to read RSSI information from.
|
|
|
|
Example: to use RSSI on AUX1 in Cleanflight use `set rssi_channel = 5`, since 5 is the first AUX channel (this is equivalent to `set rssi_aux_channel = 1` in Baseflight).
|
|
|
|
### failsafe_detect_threshold
|
|
reason: improved functionality
|
|
|
|
See `rx_min_usec` and `rx_max_usec` in Failsafe documentation.
|
|
|
|
### emfavoidance
|
|
reason: renamed to `emf_avoidance` for consistency
|
|
|
|
### yawrate
|
|
reason: renamed to `yaw_rate` for consistency
|
|
|
|
### yawdeadband
|
|
reason: renamed to `yaw_deadband` for consistency
|
|
|
|
### midrc
|
|
reason: renamed to `mid_rc` for consistency
|
|
|
|
### mincheck
|
|
reason: renamed to `min_check` for consistency
|
|
|
|
### maxcheck
|
|
reason: renamed to `max_check` for consistency
|
|
|
|
### minthrottle
|
|
reason: renamed to `min_throttle` for consistency
|
|
|
|
### maxthrottle
|
|
reason: renamed to `max_throttle` for consistency
|
|
|
|
### mincommand
|
|
reason: renamed to `min_command` for consistency
|
|
|
|
### deadband3d_low
|
|
reason: renamed to `3d_deadband_low` for consistency
|
|
|
|
### deadband3d_high
|
|
reason: renamed to `3d_deadband_high` for consistency
|
|
|
|
### deadband3d_throttle
|
|
reason: renamed to `3d_deadband_throttle` for consistency
|
|
|
|
### neutral3d
|
|
reason: renamed to `3d_neutral` for consistency
|
|
|
|
### alt_hold_throttle_neutral
|
|
reason: renamed to `alt_hold_deadband` for consistency
|
|
|
|
### gimbal_flags
|
|
reason: seperation of features.
|
|
|
|
see `gimbal_mode` and `CHANNEL_FORWARDING` feature
|