Benjamin Vedder
615dc52007
Merge branch 'master' into configurable_gyro_and_accel_filters
2022-04-19 16:05:27 +02:00
Mitch Lustig
430ec56965
Make magnetometer user configurable
2022-04-17 13:19:35 -07:00
Mitch Lustig
a041a3b952
Add support for configuring IMU onboard filters
2022-04-15 21:31:03 -07:00
Benjamin Vedder
60bd5aa1dc
Added openloop max current parameter
2022-04-06 12:14:19 +02:00
Benjamin Vedder
e5ed5ee914
Added openloop current boost parameter
2022-04-06 11:30:02 +02:00
Benjamin Vedder
3a530ac3f7
App ADC abs min and max voltage limits
2022-04-01 18:43:03 +02:00
Benjamin Vedder
c348120325
High-performance and silent HFI
2022-03-23 15:04:30 +01:00
Benjamin Vedder
e9d6fd5842
Use bitfields for CAN-messages and support two different CAN status rates
2022-03-11 18:08:28 +01:00
Benjamin Vedder
4958a91670
Added support for custom NTC and PTC motor temperature sensors
2022-01-24 00:36:53 +01:00
Benjamin Vedder
16385f1706
Renamed compression to lzo, added observer offset parameter
2022-01-12 12:27:45 +01:00
Benjamin Vedder
af55c79a2a
Renamed foc_f_sw to foc_f_zv
2022-01-06 20:44:00 +01:00
Benjamin Vedder
5d385c046b
Added UAVCAN raw RPM command
2021-11-24 10:56:45 +01:00
Benjamin Vedder
f6e78a09b6
Fixed measured MTPA mode, send ld_lq_diff detection result
2021-11-21 18:17:40 +01:00
Benjamin Vedder
f1c4e713d7
Added MTPA modes
2021-10-24 18:10:00 +02:00
Benjamin Vedder
98587c961b
Updated inductance calculation, include motor saliency in observer, separate setting for MTPA
2021-10-24 13:25:12 +02:00
Benjamin Vedder
91a19fa8b3
IMU improvements
2021-08-22 11:51:03 +02:00
Mitch Lustig
80de95c372
Update confgenerator
2021-08-19 13:39:54 -07:00
Benjamin Vedder
debd1ed4aa
Configuration updates
2021-08-16 15:02:20 +02:00
Dado Mista
3f1c7872f4
confgenerator for Balance: configurable speed/angle for each tiltback type
...
Signed-off-by: Dado Mista <dadomista@gmail.com>
2021-08-15 16:30:11 -07:00
Benjamin Vedder
3c88ecb7aa
Added configurable PID loop rate and more AUX port modes
2021-07-12 14:31:01 +02:00
Benjamin Vedder
1ab25a47db
Added position PID offset support and KD_PROC term
2021-07-11 20:19:26 +02:00
Dado Mista
813d5b15fa
Balance App: introduce new speed based variable tiltback
...
Nose angle adjustment, similar in purpose as constant tiltback
but it is proportional to erpm aka speed.
Signed-off-by: Dado Mista <dadomista@gmail.com>
2021-06-25 21:42:37 -07:00
Benjamin Vedder
75b84f1f2d
Added kill switch support
2021-06-13 13:46:27 +02:00
Mitch Lustig
d561c2669b
Add balance loop time correction
2021-06-06 14:01:42 -07:00
Mitch Lustig
de9400e461
Add brake timeout
2021-06-05 16:05:19 -07:00
Mitch Lustig
d68fc0ff4f
Balance: Updates
...
-Fix D term to use angle rather than error (which includes tilt steps)
-Switch TT to Biquad (Clear z1 z2)
-Split TT Relax speed
-Add Biquad to D term
-Add console command to graph specific variables
-Add console command to dump realtime data from specific variables
2021-06-01 03:20:00 -07:00
Mitch Lustig
b237cf4b9f
Add High Pass FIlter, implement current off delay, refactor constanttilt
2021-05-16 14:53:03 -07:00
Benjamin Vedder
f25144cc30
Removed iterative observer, added p_pid_gain_dec_angle
2021-04-26 23:14:05 +02:00
Mitch Lustig
187621d530
Add confgenerator
2021-04-17 18:20:51 -07:00
Benjamin Vedder
14b25e9aa4
Added foc_fw_q_current_factor
2021-04-15 10:04:28 +02:00
Benjamin Vedder
feb1be5fbd
First attempt at field weakening and current controller windup protection improvement
2021-04-10 11:37:35 +02:00
Mitch Lustig
08f27f433c
Add turn tilt
2021-04-06 02:18:32 -07:00
Benjamin Vedder
fcb7e12158
Made servo output a config option
2021-03-31 16:28:46 +02:00
Mitch Lustig
decdc7e7d6
Add torquetilt
2021-03-27 20:13:22 -07:00
Mitch Lustig
3b9fe6ec67
Add Booster
2021-03-27 14:00:55 -07:00
Mitch Lustig
49e624ba3b
Remove boring features
2021-03-27 12:17:10 -07:00
Benjamin Vedder
3b4e601f61
Offset calibration update
2021-03-22 12:13:19 +01:00
Benjamin Vedder
c82346b42e
Added HFI start sensor mode
2021-03-13 11:42:23 +01:00
Benjamin Vedder
8900c41c34
First phase filter and offset calibration attempt
2021-02-28 20:36:02 +01:00
Benjamin Vedder
fefb2b7d10
Set PAS pins to UART RX and TX if they are undefined, made PAS config serialization more compact, added PAS to changelog
2020-12-09 19:37:16 +01:00
Marcos Chaparro
33b5d5c1ba
Pedal assist support (PAS)
...
This commit enables cadence-based pedal assist for ebikes using
quadrature-style pedal speed sensors.
There are 2 operation modes:
* PAS only: Motor current is based only on pedal feedback
* ADC + PAS: The code will use both ADC and pedal feedback and use
the strongest command to provide seamless overlap when the user is
pedalling and requests extra torque with the throttle.
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2020-12-07 17:06:36 -03:00
Benjamin Vedder
66b4d8f56d
Added FOC D axis controller gain scaling at max modulation
2020-12-06 21:33:08 +01:00
Benjamin Vedder
55096f93cc
Added UAVCAN raw throttle modes
2020-12-04 17:54:22 +01:00
Benjamin Vedder
6509065ca2
Added BMS module
2020-10-22 08:32:51 +02:00
Benjamin Vedder
c77f92470b
IO board support, initial bms support, more openloop parameters, removed D current injection, added new HWs
2020-10-09 21:08:48 +02:00
Mitch Lustig
0f5c6f5379
Add confgen and running states
2020-07-04 00:11:20 -07:00
Marcos Chaparro
42926d530e
Add MTPA support
...
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2020-06-06 22:14:06 -03:00
Benjamin Vedder
9781fb9563
Manually merged #166
2020-05-12 15:53:32 +02:00
Benjamin Vedder
57c5d04214
Added l_duty_start and set correct motor in mcinterface_timer
2020-04-21 19:58:12 +02:00
Mitch Lustig
24afd4e6f3
Balance sprint 3
...
-Can steering based on speed
-Can steering current clamp
-Min rpm for half switch state fault
-Soft mode tuning (pitch angle affinity, setpoint affinity, setpoint limit)
-Reset I value on faults issue #117
-fix startup tiltback
2020-03-15 23:18:34 -07:00