rusefi
/
bldc
mirror of https://github.com/rusefi/bldc.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
1,155 Commits 2 Branches 0 Tags 84 MiB
Commit Graph

45 Commits

Author SHA1 Message Date
Benjamin Vedder 2c2238f76a Unified DRV fault reset interface, reset DRV faults after fault stop time ends 2021-05-14 11:24:01 +02:00
Benjamin Vedder fcb7e12158 Made servo output a config option 2021-03-31 16:28:46 +02:00
Benjamin Vedder 3b4e601f61 Offset calibration update 2021-03-22 12:13:19 +01:00
Benjamin Vedder 6a486846e3 Made 100K NTC temp sensor work for dual motor hardware too 2020-12-24 14:13:08 +01:00
Dado Mista e567c460f1 NTC 100K@25C Temperature Sensor support added 
Some PHUB188 hubs have a 100k instead of 10k temperature sensors, including the first
few batches of Fungineers hubs for balance vehicles.

Signed-off-by: Dado Mista <dadomista@gmail.com>
 2020-12-18 09:09:38 -08:00
Benjamin Vedder fefb2b7d10 Set PAS pins to UART RX and TX if they are undefined, made PAS config serialization more compact, added PAS to changelog 2020-12-09 19:37:16 +01:00
Benjamin Vedder c77f92470b IO board support, initial bms support, more openloop parameters, removed D current injection, added new HWs 2020-10-09 21:08:48 +02:00
Frank Severinsen 3acbfffa26 added custom HW file, support for ID pins, and fixed circular include 2020-07-21 10:54:04 +02:00
Benjamin Vedder 9924f333af Made motor temperature lpf slower, and added median motor temperature lpf to HWs with adc mux 2020-04-18 09:48:25 +02:00
Jeffrey M. Friesen acfc93e693 Patched some weird behavior with motor temp on stormcore and added #define for filter constant 
Was seeing a lot of coupled noise on stormcore with phase currents so I turned up the LPF on the motor temp sensor. I think it might be a good idea to turn up that LPF generally since motor temp is generally slow to change anyways.

Also found a problem in the #define for motor temp 2 in my header file. Fixed it.
 2020-04-14 14:05:47 -07:00
Jeffrey M. Friesen dceaece8f0 Updated configs for 100s and 60d 2020-03-17 10:18:39 -07:00
Benjamin Vedder 52e17059e5 Major restructuring for dual motor support, and added unity hw files 2020-03-16 18:32:39 +01:00
Benjamin Vedder b002e5d78e FW 3.66: Many changes, see changelog 2020-01-12 21:25:21 +01:00
Benjamin Vedder 210ec40d74 PTC motor thermistor support, APP_PPM sleep fix 2019-12-22 21:22:07 +01:00
Benjamin Vedder ceb8b7bf7d HW60_MK3 support, shutdown fix, added COMM_SET_CURRENT_REL, ramp fix, PPM timeout fix, IRQ prio fix 2019-12-19 16:55:38 +01:00
Benjamin Vedder dfc3ed2319 Final v3.62 2019-09-27 12:56:49 +02:00
Benjamin Vedder 602db7435b FW3.59. Many updates, see changelog for details 2019-09-03 20:39:05 +02:00
Benjamin Vedder 8313b32c0c Some fixes on PR 2019-04-26 12:02:57 +02:00
Benjamin Vedder 1e4078a713
Merge pull request #88 from paltatech/current-sensor-fault-detection 
Detect current sensor failures
 2019-04-26 11:25:30 +02:00
Benjamin Vedder 0551117351 Some HW cleanup and documentation, fixed DRV8301 fault readout bug, added mpu_read_reg terminal command 2019-04-26 11:07:31 +02:00
Marcos Chaparro 6d758b38f2 Detect current sensor failures 
2 failure modes added:
* On boot, when calculating DC offsets generate a fault if the offset is beyond
HW_MAX_CURRENT_OFFSET. Fault code reports which sensor is having issues (1, 2 or 3).
Most likely cause is a disconnected sensor, if hw has fault-detecting pullups.

* On runtime, in setups with 3 in-line phase current sensors, checks that the sum
of the currents is below MCCONF_MAX_CURRENT_UNBALANCE, with a configurable low pass
filter. If unbalanced current is high, it means a fault to ground, or a disconnected
sensor (this works at 0 Amp if hw has pullups in the sensor input to detect the
failure).

Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
 2019-04-20 09:43:08 -03:00
Marcos Chaparro 8c4fc35ca0 Move sin/cos signal pin definitions to hwconf/ 
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
 2019-04-08 18:59:07 -03:00
Benjamin Vedder 39bb8a6b09 FW 3.53: Limit foc_current_filter_const range, 1Mbit/de NRF speed, lower detect f_sw for resistance, no temp_comp by default 2019-03-20 22:46:36 +01:00
Benjamin Vedder 35c1c72ab4 Commands restructuring for thread safety, 75/300 vreg fix, fixed relative current commands 2019-03-04 19:23:38 +01:00
Benjamin Vedder 01e72eb555 Autogenerated config parsing with signatures, fixed previous PRs 2019-03-01 21:36:58 +01:00
Benjamin Vedder 123bb00ab4 Major 2019 update 2019-02-18 19:30:19 +01:00
Benjamin Vedder a20c35b338 FW 3.39: AUX pin support, some refactoring 2018-07-06 21:20:54 +02:00
Unknown 5d9cc774ab added das_mini and DRV8320 support 2018-04-05 14:20:17 +02:00
Benjamin Vedder 8503444672 Added MINI4 hw, added 75_300 built fw 2018-04-04 23:08:55 +02:00
Benjamin Vedder 22dc2ce33c FW 3.37: FOC KI temp comp, configurable foc current filter 2018-03-24 22:32:58 +01:00
Benjamin Vedder bf27cb673e Removed software servo driver, fixed hw servo driver to work with all hardwares 2018-02-28 10:22:25 +01:00
Benjamin Vedder 6277cf74ca FW 3.31: Acc temp dec option, PID for APP_ADC 2017-10-27 21:29:12 +02:00
Benjamin Vedder f141157358 First official commit after the VESC Project release 2017-09-04 21:12:43 +02:00
Benjamin Vedder 5dbc94c525 FW 3.7 2016-11-04 15:18:34 +01:00
Benjamin Vedder d2f6d87560 FW 3.0: HW60 support, 3 low/high side shunt support, permanent NRF option 2016-06-27 17:29:09 +02:00
Benjamin Vedder c4ff81e849 Ported to ChibiOS 3, refactoring, cleanup, added safe start delay after fault for PPM app, removed unused ST libraries 2015-10-08 23:09:39 +02:00
Benjamin Vedder 116ef561d0 HW 4.10 support 2015-10-04 20:52:36 +02:00
Benjamin Vedder 984b846401 FW 1.14: configuration loss fix, HW49 support, mcpwm interfaces for apps 2015-10-04 01:43:26 +02:00
Benjamin Vedder 06129bb66c FW 1.13: Hw 4.8 support, new CC implementation for nunchuk, refactoring, custom app and hw config support 2015-09-17 23:24:55 +02:00
Benjamin Vedder d9c5ed7ac3 Added hw 46 and implemented an I2C reset function 2014-11-23 20:29:36 +01:00
Victor Stensson a367058998 Added victors HW 2014-10-25 21:13:16 +02:00
Benjamin Vedder f7cda79d1b HW45-implementation, temp-protection, nunchuk-fix, i2c-fixes 2014-10-19 19:31:06 +02:00
Benjamin Vedder 81a6d84113 Nunchuk implementation (Nyko Kama tested), mah and wh counting 2014-10-19 01:00:53 +02:00
R.E. Wolff 6a19c24154 added bitwizard harware config file. 2014-06-28 17:21:51 +02:00
Benjamin Vedder f4b638ed04 Added an application directory and converted some parts of the main function to applications 2014-04-19 00:09:46 +02:00