Benjamin Vedder
77af43935a
Removed outdated LED-support
2021-05-11 09:57:27 +02:00
Benjamin Vedder
fcb7e12158
Made servo output a config option
2021-03-31 16:28:46 +02:00
Benjamin Vedder
ecb43e70bb
Cleanup
2021-01-13 21:51:55 +01:00
Jeffrey M. Friesen
8f703dace0
merge
2021-01-13 08:57:36 -08:00
Jeffrey M. Friesen
e862f29298
Re-wrote uart driver a bit
2021-01-05 09:39:45 -08:00
Mitch Lustig
e08d0e8b8c
Only init IMU once so it doesn't override UART on reboot
2020-04-28 20:49:09 -07:00
Jeffrey M. Friesen
f7964e20c2
Few small changes and fixed bug with duals
...
Added ramping to current measurement to avoid steps during current calibration with an un-tuned current controller.
Added terminal command for mapping to internal nrf pins, useful when you want to erase_mass a locked nrf chip and dont want to cycle between a bunch of windows to scan connect etc.
Made fault led on duals blink if motor 2 is faulting.
Added break on inductance measurement if motor faults.
Added placeholder commands for changing name and pin of BLE module.
2020-04-01 17:58:37 -07:00
Benjamin Vedder
52e17059e5
Major restructuring for dual motor support, and added unity hw files
2020-03-16 18:32:39 +01:00
Benjamin Vedder
ceb8b7bf7d
HW60_MK3 support, shutdown fix, added COMM_SET_CURRENT_REL, ramp fix, PPM timeout fix, IRQ prio fix
2019-12-19 16:55:38 +01:00
Benjamin Vedder
dfc3ed2319
Final v3.62
2019-09-27 12:56:49 +02:00
Benjamin Vedder
602db7435b
FW3.59. Many updates, see changelog for details
2019-09-03 20:39:05 +02:00
Benjamin Vedder
023d78679f
Fixed flash CRC check
2019-04-18 22:30:01 +02:00
Marcos Chaparro
4fceb73db9
Continuous flash memory integrity check running on background
...
Create a new, low priority thread that checks that the CRC of the
flash memory matches the CRC stored in flash.
8kB chunks are computed every 50 milliseconds. A reset is invoked if
CRC does not match.
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-04-17 20:54:08 -03:00
Marcos Chaparro
1ae059349f
CRC integrity check of flash memory
...
The check only covers address 0x08008000 to 0x805FFFF, where application
code is stored. It excludes virtual eeprom area (first 0x8000 bytes)
because it is modified on runtime with user configurations.
After a fresh flash programming the CRC is read as 0xFFFFFFFF and firmware
computes and stores the new CRC and a reset is invoked.
After reset the CRC will be available for checking code integrity.
Linker file had a wrong flash2 size, it was set to 480kB, thus allowing
the linking of binaries larger than 393216 (x3 128kB sectors).
The bootloader won't program binaries that span more than 3 sectors.
Now flash2 length is set as (393216 - 8) to ensure that the last 8 bytes
are left blank (0xFFFF) and reserved for CRC information.
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-04-15 20:56:42 -03:00
Benjamin Vedder
1161f8417c
Added SWD programming support (based on Black Magic Probe) and open loop duty cycle control
2019-03-31 10:49:18 +02:00
Benjamin Vedder
39bb8a6b09
FW 3.53: Limit foc_current_filter_const range, 1Mbit/de NRF speed, lower detect f_sw for resistance, no temp_comp by default
2019-03-20 22:46:36 +01:00
Benjamin Vedder
65298263b6
75/300 R2 support, terminal sync cmd, IMU support, option to disable permanent UART, collected timer functions in one place
2019-03-10 14:57:42 +01:00
Marcos Chaparro
32cf05629d
Resolve merge conficts with major 2019 release
...
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-02-18 20:25:52 -03:00
Benjamin Vedder
123bb00ab4
Major 2019 update
2019-02-18 19:30:19 +01:00
Marcos Chaparro
c59dd2b2fc
Fix shadowed variables. Add -Wshadow.
...
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-01-28 16:52:02 -03:00
Marcos Chaparro
884f626e63
Restore capability of enabling parameter assertion of peripheral libraries
...
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-01-28 16:47:10 -03:00
Marcos Chaparro
17f97763c0
Extend watchdog coverage with IWDG, a watchdog running from an independent LF oscillator. If any of the threads being monitored does not report for more than 12ms, a reset will be asserted. When a WDG reset happens, the user can see it in the fault logs from vesc tool
...
Signed-off-by: Marcos Chaparro <mchaparro@paltatech.com>
2019-01-24 12:19:44 -03:00
Benjamin Vedder
bf27cb673e
Removed software servo driver, fixed hw servo driver to work with all hardwares
2018-02-28 10:22:25 +01:00
Benjamin Vedder
5348662197
FW 3.32: Configurable CAN baud rate
2017-11-08 14:07:35 +01:00
Benjamin Vedder
f141157358
First official commit after the VESC Project release
2017-09-04 21:12:43 +02:00
Benjamin Vedder
5dbc94c525
FW 3.7
2016-11-04 15:18:34 +01:00
Benjamin Vedder
d2f6d87560
FW 3.0: HW60 support, 3 low/high side shunt support, permanent NRF option
2016-06-27 17:29:09 +02:00
Benjamin Vedder
cb2a205cb8
FW 2.17: as5047 support, change sensor port mode in conf, better encoder detection, FOC ah and wh counter fixes
2016-04-27 15:32:32 +02:00
Benjamin Vedder
08a27cfbbd
FW 1.16: Hall sensor position control, brake at 0RPM setpoint in FOC, FOC parameter detection fix
2016-02-24 21:19:44 +01:00
Benjamin Vedder
02f140e335
FW 2.11: Refactoring, dead time comp fix for smoother braking when the speed is zero
2016-01-30 15:57:51 +01:00
Benjamin Vedder
90986c31de
FW 2.9: NRF updates (nunchuk has to be updated too), nunchuk command, small can fix, custom app data command
2016-01-24 13:44:51 +01:00
Benjamin Vedder
42c1b79a08
FW 2.7: Better encoder support, small UART and CAN fixes, NRF commands preparation
2015-12-28 01:50:23 +01:00
Benjamin Vedder
59309d9772
FW 2.4: some nan fixes that shoud prevent FOC from stopping and needing a reboot in some cases
2015-12-10 23:21:04 +01:00
Benjamin Vedder
ff090fd4e0
FW 2.3: MAJOR UPDATE: FOC!!
2015-12-08 21:01:23 +01:00
Benjamin Vedder
c4ff81e849
Ported to ChibiOS 3, refactoring, cleanup, added safe start delay after fault for PPM app, removed unused ST libraries
2015-10-08 23:09:39 +02:00
Benjamin Vedder
984b846401
FW 1.14: configuration loss fix, HW49 support, mcpwm interfaces for apps
2015-10-04 01:43:26 +02:00
Benjamin Vedder
58d892935d
PPM dec fix, current sampling updates, ADC cruise control, commutation fix, higher switching frequency, refactoring
2015-08-23 18:26:05 +02:00
Benjamin Vedder
f032111b9b
NRF updates, better servo output support
2015-07-31 23:26:50 +02:00
Benjamin Vedder
d07d65a5ca
USB send mutex fix and some detect experimentation
2015-06-26 21:45:28 +02:00
Benjamin Vedder
bc7a779632
Bootloader support, CAN fixes
2015-05-08 22:53:59 +02:00
Benjamin Vedder
d8830a2543
Option to switch CAN off, optimization to send short forwarded commands over CAN in just one frame
2015-04-27 20:43:02 +02:00
Benjamin Vedder
607e99d211
Configuration over CAN, first implementation of position control, more configuration options
2015-04-27 00:02:32 +02:00
Benjamin Vedder
2ccb52514e
Encoder support, NRF nunchuk support
2015-04-11 10:07:36 +02:00
Benjamin Vedder
8dc8ffe2c7
Nunchuk ramping, ws2811 configurable pin (Requieres latest BLDC_Tool)
2014-12-20 12:52:38 +01:00
Benjamin Vedder
9ff0f99593
WS2811/WS2812 LED driver to use LEDs for turn and brake lights, etc
2014-12-09 00:11:29 +01:00
Benjamin Vedder
5675c4f485
First CAN implementation
2014-12-07 04:30:25 +01:00
Benjamin Vedder
7c7a315a81
Commutation fixes, timer update change, current measurement fix, fault logging in RAM, current limit fix
2014-10-24 23:04:10 +02:00
Benjamin Vedder
10bbe73206
Global timeout implementation
2014-09-20 13:41:18 +02:00
Benjamin Vedder
d6beda7b47
Complete servo-decoding rewrite, common command module, full access to everything over uart, more ppm options
2014-09-20 03:22:38 +02:00
Benjamin Vedder
6d4e55051c
Prepared applications for runtime configuration
2014-09-17 21:05:57 +02:00