* detect hse
* implementation
* these boards don't need to set their own HSECLK
* assertions
* name
* tweaks
* how did this compile?
* s
* biiiig comment
* this script doesn't need to set 25mhz any more
* ....or PLLM
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* CAN HW: use designated initizalization
* board subaru eg33: set CAN transceiver EN to active state constantly
While FW does not handle CAN transceiver's EN signal
* tle6240: fix Matt's trap
* map: report some default value if no map sensor configured
Othervise user will get "unexpected MAP value" warning
Thread 2 hit Breakpoint 1, validateMap (mapKPa=3121.66162) at ./controllers/sensors/map.cpp:126
126 if (cisnan(mapKPa) || mapKPa < CONFIG(mapErrorDetectionTooLow) || mapKPa > CONFIG(mapErrorDetectionTooHigh)) {
(gdb) bt
0 validateMap (mapKPa=3121.66162) at ./controllers/sensors/map.cpp:126
1 0x002717dc in getMap () at ./controllers/engine_cycle/map_averaging.cpp:334
2 0x0028175a in GetMapWrapper::getMap (this=0x2004214c <mapWrapper>) at ./init/sensor/init_map.cpp:12
3 0x0028177c in operator() (__closure=0x0) at ./init/sensor/init_map.cpp:20
4 0x002817a8 in _FUN () at ./init/sensor/init_map.cpp:21
5 0x002811de in FunctionPointerSensor::get (this=0x20042150 <mapSensor>) at ./controllers/sensors/function_pointer_sensor.h:24
6 0x002651c0 in SensorRegistryEntry::get (this=0x2003ddf0 <s_sensorRegistry+48>) at ./controllers/sensors/sensor.cpp:111
7 0x002653e2 in Sensor::get (type=SensorType::Map) at ./controllers/sensors/sensor.cpp:208
8 0x00261f38 in updateTunerStudioState (tsOutputChannels=0x2003d2e8 <tsOutputChannels>) at ./console/status_loop.cpp:637
9 0x00262e48 in prepareTunerStudioOutputs () at ./console/status_loop.cpp:900
10 0x00260914 in TunerStudio::cmdOutputChannels (this=0x20021a64 <tsInstance>, tsChannel=0x2003d4dc <usbChannel>, offset=0, count=340) at ./console/binary/tunerstudio_commands.cpp:24
11 0x00260584 in TunerStudioBase::handleCrcCommand (this=0x20021a64 <tsInstance>, tsChannel=0x2003d4dc <usbChannel>, data=0x2003d4e1 <usbChannel+5> "", incomingPacketSize=5)
at ./console/binary/tunerstudio.cpp:701
12 0x0025fb3c in tsProcessOne (tsChannel=0x2003d4dc <usbChannel>) at ./console/binary/tunerstudio.cpp:537
13 0x0025fbe2 in TunerstudioThread::ThreadTask (this=0x2003d608 <usbConsole>) at ./console/binary/tunerstudio.cpp:554
14 0x0025f094 in ThreadController<1200>::StaticThreadTaskAdapter (thread=0x2003d608 <usbConsole>) at ./controllers/system/thread_controller.h:37
15 0x0020035e in _port_thread_start () at ChibiOS/os/common/ports/ARMCMx/compilers/GCC/chcoreasm_v7m.S:201
* lua on f4
* move perf trace to efifeatures
* check that it's defined
* cypress and kinetis
* it would help to define the correct thing
* disable buffer if not used
* we can work with 2k
* turn off ramdisk on mre qc
* wow strncpy is useless for truncated strings
* turn off for bootloader
* lto bootloader
* memory
* memory
* rename
* core
* structing
* more
* makefile
* structing
* 6240 compiles
* explicit cast instead of implicit narrowing
* 8888
* no extern C
* fix tests build
* extern "C"
* 33810
* 8860
* 33810
* linker
* unbreak master
* don't need that if compiling as C++
* bump config
* fix test
* tests
* unit tests bad merge
* build
* move subaru logic to cpp file
* cpp goodness
* hpp include
* this is probably the right thing to do
* simulator
* lua on f4
* move perf trace to efifeatures
* check that it's defined
* cypress and kinetis
* it would help to define the correct thing
* disable buffer if not used
* we can work with 2k
* turn off ramdisk on mre qc
* wow strncpy is useless for truncated strings
* turn off for bootloader
* lto bootloader
* remove callback parameter from cj125
* remove from ext
* remove stateChangeCallback
* alt doesn't need that
* demorgan
* remove call
* bad cut/paste
* check the actual pin in the test
* MC33972: update
-per-instance thread
-enable pull-ups for enabled pins only
* smart-gpio: mc33972: uses 8-bit spi frames
3 bytes are sent to make 24-bit frame
* finish it off
* one more logger ptr
* fwd decl
* Revert "one more logger ptr"
This reverts commit a21fb0087ddc748978d716db2710800cf26e437b.
* unused
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* remove simple cases
* more simple
* serial
* s
* more
* try memory
* easy
* mmc acc
* that's how much memory
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* minor cleanup
* enable mailboxes
* priority
* implement new logger
* more cleaning
* signature
* remove debug
* put the assertion back in
* remove debugging
* spelling
* doy
* tweaks & comments
* cleaning
* size_t
* guard more
* test build now
* needs more ram until we can remove LogginWithSTorage
* hunt for memory
* bootloader
* unused
* stub simulator
* it would help to get the signature right
* geez kinetis only has 64k ram
* more guarding because kinetis
* that's now very legal and very cool
* templatify
* s
* force null terminate
* probably fix
* const
* write a test
* disable sensor chart for now
* hide SC ui
* oh nope that breaks many things
This reverts commit c3c1bb324fb484c3d9cc44b7715c234bc0392e1e.
* missed one
* reset after scheduleLogging
* we can't print out the full message because it contains commas which break parsing
* force terminate long buffers
* let's see how much memory we have to play with
* a lot, is the answer
* real thread name
* shrink this for now before its deleted
* turn that back on
* biiig comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* engine math: extrant getFiringOrderTable for reuse
* engine math: getNextFiringCylinderId helper
* introduce knock_logic: first member is getCylinderKnockBank()
moved from software_knock.cpp
* hip9011: support two inputs/banks
* fix CI
* Board Subaru EG33: populated with TPIC8101 with Advanced mode
* hip9011: test communication in advanced mode
* hip9011: handle situation when chip is already in advanced mode
* Board Subaru EG33: cylinder to knock bank mapping
* hip9011: count spi transactions in advansed mode too
* hip9011: reset incalid responce counter after chip initialization
* hip9011: make debug output more structured
* new function
* hellen
* MRE
* proteus
* put those function declarations in a reasonable place
* put the comment back
* weak
* move that to a reasonable place
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* hip9011: coexistance with other spi devices
* hip9011: rework so SPI transfer is invoked from thread
also use polling spi exchange to avoid cache problems
* hip9011: move calculations from ADC callback to thread
* hip9011: big cleanup
* hip9011: simplify spi communication
* No need to set knockBandCustom if it is not custom
HIP9011 calculates knockBand from cylinderBore same way
* hip9011: make unit test happy
* hip9011: fix unit test
* hip9011: remove duplicated initialization, reorder
* hip9011: just renames and data type adjustments
* hip9011: rename BAND() to HIP9011_BAND()
* hip9011: move some code from lookup.cpp to logic.cpp
* hip9011: move initEngineNoiseTable to engine_configuration.cpp
* hip9011: move lookup tables to hip9011_logic.c
* hip9011: remove empty files
* hip9011: additional checks
* carve out UART specific
* implement channel
* config cleanup
* use new config
* bootloader
* dead code
* s
* h7 inherits f7
* oops
* ok now it's right
* tests
* cleanup
* call setup
* put that in its own file
* cleanup
* format
* guard
* not needed
* improve guarding
* portable
* allow override of uart mode
* fixes for bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* start cleaning
* disabled feature means don't print that it's disabled
* cli
* usages
* printMsg -> scheduleMsg
* this is alllll dead now
* no crlf please
* all hope is lost if you manage to hit this line
* tests
* tests
* ok we did actually need that part
* sim
* d
* kinetis
* it did ifdef, not if
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* early hw init
* s
* read configuration exactly once
* cleanup
* housekeeping
* test friendly
* ugh bad merge
* that is a noop
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* early hw init
* s
* Revert "s"
This reverts commit 10d3039168613cfb2b0cf1c960d2f18894745ce3.
* bor
* I can't type
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* hip9011: move hipCs out of EnginePins to hip9011 driver
* hip9011: cleanup debug output, save few RAM bytes
* Supress few signed vs unsigned warnings
* new apis
* dedicated USB path
* move decl
* init
* don't init usb twice
* guard
* check that we're initialized before using TS
* comment
* guard
* guard USB
* brain doesn't go good
* make tests happy
* dead define
* cypress
* ifdef != if
* s
* include priority
* don't start a thread we know we don't need
* bad-ish merge
* const
* why did this code exist...?
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* enable
* guard correctly
* h7 bit timing
* allow longer frames
* allow data smaller than maximum
* mcu temperature
* typo
* tx message
* testing
* check for CAN or FDCAN
* don't need that any more
* h7 bitrate config
* undo testing
* h7-ify msg tx
* comment
* break out SID/EID macros
* guard differently
* update ChibiOS
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* hook up lps25
* it would help to include all the files
* unguard some stuff
* unguard more
* guarding
* s
* guard
* only register if init worked
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* extract
* guard
* put some back
* put back
* slow is actually 500hz so slow is fine here
* no magic
* fix printFullAdcReport
* cast
* implement h7 adc ish
* analog switches
* bad merge
* no map avg on h7
* fix master while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* extract
* guard
* put some back
* put back
* slow is actually 500hz so slow is fine here
* no magic
* fix printFullAdcReport
* cast
* if we turn those off is it happy
* stub cypress/kinetis
* guard fast stuff better
* bad merge
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* replace null device with rusefi ini
* comment
* warning
* stub ramdisk for when we don' thave an image
* maybe generate the image with a build
* install mtools
* fail on error
* install deps _before_ we need them
* embed a little readme
* oops
* Board subaru eg33: has HIP9011 knock sensor
* hip9011: lastExecutionCount does not exist any more
* hip9011: extranc commands to header, use logic math for bitfields
* mostly guard against no fast adc
* disable on h7
* guard more
* guard adc init
* you can't do that in c++
* we need that
* s
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
Andrey
Matthew Kennedy
rusefillc
Andrey G
David Holdeman
shadowm60
GitHub build-firmware Action