Matthew Kennedy
204aa33e9a
goodbye ignitionOffset ( #2503 )
...
* remove
* set the timing map to do what the offset used to do
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-28 08:00:09 -04:00
Matthew Kennedy
368415972e
read configuration from flash exactly once ( #2481 )
...
* early hw init
* s
* read configuration exactly once
* cleanup
* housekeeping
* test friendly
* ugh bad merge
* that is a noop
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 18:16:26 -04:00
Matthew Kennedy
92d249918b
rename setBoardConfigurationOverrides ( #2479 )
...
* rename
* proteus
* comments
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-22 14:15:09 -04:00
Matthew Kennedy
5e6746c3aa
Implement nonlinear fuel level sender ( #2473 )
...
* table function
* config fields
* sensor type
* switch consumers
* init the sensor
* ui
* 1mv resolution
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-19 08:39:08 -04:00
Matthew Kennedy
72214b8b77
default config, UI tweaks ( #2444 )
...
* s
* fix this while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-12 00:16:24 -05:00
rusefi
6c9416daa9
aux pid is now VVT
2021-02-10 12:41:38 -05:00
rusefi
4b8a92ccc9
M62T vanos support #2243
2021-02-08 18:08:26 -05:00
rusefi
d05edd2a3d
M62T vanos support #2243
2021-02-08 16:16:26 -05:00
Andrey G
0f47cff952
Add subaru eg33 ( #2294 )
...
* engine: Subaru SVX EG33 engine configuration
Not tested yet. Just basic settings and placeholder
* board: add Dron_Gus's Subaru EG33 p'n'p board
* board: subaru eg33: linker script: stack, bss and heap to ram0
* board: subaru eg33: add mapping.yaml
* board: subaru eg33: scripts for autogenerated
* board: subaru eg33: fix DMA conflict (ADC1 vs SPI5)
* board: subaru eg33: enable ADC3
* board: subaru eg33: Autogenerated
* board: subaru eg33: disable fsio control of Main Relay
Default MAIN_RELAY_LOGIC cause error during parsing
* board: subaru eg33: configuration hack to fix usbconsole.c
* gen_config: generate config for Subaru SVX board too
2021-02-06 12:50:34 -06:00
Matthew Kennedy
7fec313f50
Proteus analog input ci ( #2271 )
...
* test vbatt
* test proteus vbatt
* tolerance
* these don't work on proteus
* new engine type
* test analog input
* more test points, less tolerance
* console build needs this file generated
* only include for hw ci builds
* wiring info
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-03 13:34:48 -06:00
Matthew Kennedy
654bf0d698
Map fallback logic, TS cleanup ( #2247 )
...
* add new field
* UI
* set default
* consume new parameter
* some cleanup while we're at it
2021-01-27 20:31:29 -05:00
rusefillc
0ae7eed5be
knock-knock
2021-01-23 00:00:34 -05:00
rusefillc
7f893c6159
Hellen72
2021-01-22 02:02:16 -05:00
rusefillc
8faa1602f7
HELLEN_NB2
2021-01-22 01:47:01 -05:00
Matthew Kennedy
8608df5450
flex fuel AFR interpolation ( #2190 )
...
* config
* implement flex
* secondary fuel default
* test
* test works
* rename
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-05 16:27:23 -05:00
rusefillc
21a925f613
hellen
2021-01-01 01:10:28 -05:00
rusefillc
f9de491b67
proteusBoardTest
2020-12-26 10:41:33 -05:00
Matthew Kennedy
fad3b07b8b
Purge e34 config ( #2127 )
...
* remove
* enums
* s
* func test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-24 07:31:25 -05:00
Matthew Kennedy
7617b115de
Partition configs by board type ( #2106 )
...
* remove old flag
* flags
* reorder switch
* oops
2020-12-22 21:54:40 -05:00
Matthew Kennedy
4a95652f88
Purge fiesta config ( #2117 )
...
* config
* this had a feature flag?
* enums
* goodbye, fiesta
2020-12-22 17:22:05 -05:00
rusefillc
2940703a97
PROTEUS_QC_TEST_BOARD
2020-12-22 10:13:27 -05:00
Matthew Kennedy
85f0621738
Purge rover v8 config ( #2116 )
...
* bye
* goodbye, rover v8
* that snuck in
* use a different config for that test
2020-12-22 10:05:54 -05:00
rusefillc
f5a5a54683
naming consistency
2020-12-18 09:01:18 -05:00
Matthew Kennedy
d3cbed60af
move target computation ( #2091 )
2020-12-17 17:46:51 -05:00
Matthew Kennedy
34edf34bf4
only build in config for the correct board ( #2088 )
...
* only build in config for the correct board
* undo
* undo
* undo
* only touch proteus config
* include configs in tests
2020-12-17 17:12:24 -05:00
rusefillc
39a292a46a
trigger and start button pins not displayed by "pins" command fix #2084
2020-12-16 22:53:26 -05:00
rusefillc
f147aabcd7
trigger and start button pins not displayed by "pins" command #2084
...
progress but not complete fix yet
2020-12-16 22:00:42 -05:00
rusefillc
7d104bff8d
pnp progress
2020-12-15 00:09:35 -05:00
rusefi
afe387c7be
subi
2020-12-13 11:39:10 -05:00
rusefillc
3f17d84b44
fix warnings found by clang #2014
2020-12-08 13:59:40 -05:00
rusefillc
f868d05dec
MRE_SUBARU_EJ18
2020-12-06 14:16:40 -05:00
rusefillc
c0e2ca5e74
MRE_SUBARU_EJ18
2020-12-06 13:08:09 -05:00
rusefillc
d199302b83
miata 94
2020-11-28 22:49:28 -05:00
rusefillc
42c56a47da
dead engine config
...
one step back
2020-11-26 21:21:25 -05:00
rusefillc
0f39f37bba
dead engine config
2020-11-26 21:07:34 -05:00
rusefillc
96ca95bd1e
dead engine config
2020-11-26 20:26:12 -05:00
rusefi
bdba67e05f
better default value
2020-11-25 17:02:28 -05:00
rusefillc
6f56988469
https://rusefi.com/forum/viewtopic.php?p=38367#p38367
...
idle position/waste gate position sensor usability
2020-11-14 18:05:27 -05:00
Matthew Kennedy
789926a61d
convert cranking defaults to mg ( #1921 )
...
* convert cranking defaults to mg
* fix tests
2020-11-03 14:12:26 -05:00
rusefi
1d6c6eb804
wall wetting default
2020-10-31 19:28:27 -04:00
Matthew Kennedy
bcabb51222
unused tach field ( #1918 )
2020-10-29 15:26:01 -04:00
rusefillc
781cc3d326
[EPIC] [Feature Request] Transmission Control #1454
2020-10-28 01:23:05 -04:00
rusefillc
eb06ce55cd
TCU
2020-10-28 01:01:30 -04:00
Matthew Kennedy
b8c2041467
Everything in lambda! ( #1893 )
...
* lambda
* default configs, fix build
* config, gauge, UI
* more digits
* change menu text
* fix that while I'm here
* doesn't need extra word
* todo note
* tests
* last test
* missed a config
* update java
* store target lambda
* more java
* format
* hopefully enough java for CI to pass
2020-10-26 18:15:17 -04:00
Matthew Kennedy
6abc80e74c
convert mass -> duration later in the pipeline ( #1906 )
...
* cranking duration to mass
* implement
* units
* patch types
* suppress warning
* fix output channels
* add note about how to set it
2020-10-26 07:23:13 -04:00
Matthew Kennedy
dbdeca93b0
implement fuel pressure sensors ( #1897 )
...
* add
* remove old
* remove more old
* makefile
* fix init
* patch up other stuff
* actually fix it this time
* raw output channels
* gauges, UI
* scaled channel
* fix field ordering
2020-10-23 07:31:47 -04:00
rusefillc
d5d5bbba9f
tachPulsePerRev needs a safer default, MRE config needs a value
2020-10-06 00:56:49 -04:00
Matthew Kennedy
3374db1658
Remove dead & useless config ( #1834 )
...
* remove dead config
* remove enum
2020-09-29 06:34:39 -04:00
rusefi
3b9d339db0
unit test for start/stop hardware and pin repository #1811
2020-09-21 12:29:01 -04:00
David Holdeman
e8e2cf2cfd
DebounceButton A/C switch ( #1782 )
...
* change acSwitch name, add mode
* fix
* remove some adc stuff
* remove some adc stuff
* semicolon stupid
* left behind
* add readpinstate
* wrong var name
* add functions back
* fix name
* bool, not void, plus fix name
* move
* not sure what I broke
* try setMockValue
* namespace
* whoops missed one
* switch values because adc was set up for pullup
* try 5
* comment for now
* comment for now
* uncomment tests, add function to mock, add mock to efiReadPin
* fixes
* for F's sake
* if
* add defy
* pass params
* use ASSERT_TRUE/FALSE
* advance time
* remove ifdef from readPin
* try moving if
* move to separate func
* move extern
* move include
* try engine_test_helper
* am confuse
* move func to else
* include hal
* add efi prod check
* remove include
* try extern
* move include
* semicolon stupid
* move extern again
* include
* move mockPinStates
* size
* add if
* add comment
* clean on instantiation
2020-09-10 22:16:20 -04:00